EP-ZQ80 IBM 머신 — Bloma IBM85의 대체품

12 cavities at 100 ml versus Bloma IBM85's 8 cavities — a 50% output increase at identical cycle time and energy. EP-ZQ80 at 466 g shot weight supports 12 cavities at 35 g per preform (420 g) with 46 g headroom for heavier-wall pharmaceutical HDPE grades. Closed injection-to-stripping; ±0.05 mm neck thread tolerance; Korean MFDS, FDA 21 CFR and EU GMP documentation at programme commencement.

20 cavities at 10 ml PCTG dropper vials, 18 cavities at 30 ml PCTG serum vials — with S136 SPI A1 tooling at 0.8–1.6% ASTM D1003 haze. EP-ZQ80's 800 mm wide platen versus IBM85's 620 mm directly enables the additional cavity positions that make EP-ZQ80 the commercial-scale machine for Korean luxury K-beauty brands that IBM85-class cannot match on either cavity count or optical quality.

PP shampoo, body wash and fragrance bottles at 100–500 ml. At 466 g shot weight, EP-ZQ80 supports 8 cavities at 500 ml PP shampoo (55 g per bottle, 440 g total); Bloma IBM85 at 310 g supports 5 cavities (275 g). The 60% additional shot weight on EP-ZQ80 translates to 3 additional cavities at 500 ml format — a 60% output increase at this large-format daily chemical application.

PP and HDPE supplement capsule and vitamin containers at 100–1000 ml in 4–12 cavity configurations. Korea Ever-Power food-contact documentation (Korean MFDS, FDA 21 CFR 177.1520, EU 10/2011) supplied at commercial programme commencement.

Q1: Will Bloma IBM85 mould tooling transfer to the EP-ZQ80?

Not directly. Bloma IBM85 platen is 620 × 430 mm versus EP-ZQ80 800 × 400 mm — 180 mm wider and 30 mm shorter on EP-ZQ80. The different platen dimensions result in different bolt-hole patterns and mandrel pitch configurations. Mould thickness (250 mm on EP-ZQ80) and mandrel diameter may also differ from Bloma IBM85 tooling standards. Send Bloma IBM85 mould base drawings for a Korea Ever-Power compatibility assessment within 5 working days at no cost — in some cases, a platen adapter plate can accommodate existing Bloma IBM85 tooling on EP-ZQ80's wider platen.

Q2: How does EP-ZQ80 at 55mm screw achieve 466g when Bloma IBM85 at 50mm only reaches 310g?

EP-ZQ80 uses a 55 mm screw versus Bloma IBM85's 50 mm screw — a 10% screw diameter increase. However, screw diameter alone does not account for a 50%+ shot weight difference. The barrel L/D ratio (22:1 on EP-ZQ80) and effective injection stroke are the primary determinants of shot weight at a given screw diameter. EP-ZQ80's extended injection stroke calibrated for 466 g at 55 mm screw delivers approximately 2.4 times more shot weight per millimetre of screw diameter than Bloma IBM85's 310 g at 50 mm suggests. Buyers should request Bloma IBM85 barrel L/D and injection stroke specifications for a direct technical comparison.

Q3: How many additional cavities does EP-ZQ80 provide versus Bloma IBM85 at 100ml pharmaceutical format?

For a standard 100 ml pharmaceutical HDPE tablet bottle at 35 g per preform: EP-ZQ80 at 466 g runs 12 cavities (12 × 35 g = 420 g, within limit — confirmed from EP-ZQ80 cavity table at 100 ml = 12 cavities); Bloma IBM85 at 310 g is limited to 8 cavities (8 × 35 g = 280 g, within limit). EP-ZQ80 provides 4 additional cavities — a 50% output increase at identical cycle time and energy cost. At 3.5 s dry cycle and three shifts per day: the 4-cavity difference adds approximately 83 million additional bottles per year per machine.

Q4: Does EP-ZQ80 at 2.0m height fit Korean pharmaceutical GMP cleanrooms where IBM85 at 2.55m does not?

Yes. EP-ZQ80 at 2.0 m fits Korean pharmaceutical GMP cleanrooms with 2.4 m ceiling clearance with 0.4 m overhead maintenance access — sufficient for barrel heater element replacement and routine hydraulic system inspection. Bloma IBM85-class at 2.55 m physically cannot be installed in a 2.4 m ceiling cleanroom, and in a 3.0 m cleanroom leaves only 0.45 m overhead — below the 0.5 m minimum typically required for barrel heater band access. This single dimension difference determines GMP IQ/OQ facility qualification success or failure for IBM85-class Korean pharmaceutical buyers.

Q5: What is the EP-ZQ80 machine and mould lead time?

Machine: 55–70 working days from order confirmation and deposit. Mould tooling: 45–55 working days (H13 SPI B1) or 60–75 working days (S136 SPI A1 for 20-cavity PCTG precision tooling). Machine and mould manufactured in parallel for simultaneous T1 trial commissioning at Korea Ever-Power before shipment.

Q6: What GMP documentation does Korea Ever-Power provide with EP-ZQ80?

기계 사양서; 구매자 지정 수지 및 캐비티 형식에 대한 FAT 보고서; CE 인증서; ISO 9001:2015 인증서; 한국 식품의약품안전처(MFDS) 식품용기 등록 및 KOLAS 인증 시험기관의 KP 플라스틱 용기 표준 시험 결과를 포함한 PP 수지 분석증명서(CoA); PCTG Eastman TX1001 FDA 21 CFR 177.2490 식품 접촉 적합성 확인서 + EU 10/2011 적합성 선언서. IQ/OQ 문서 양식은 요청 시 제공 가능.

Q7: What after-sales service does Korea Ever-Power provide in Korea for EP-ZQ80?

Korea Ever-Power Ansan-si, Gyeonggi-do: one week on-site commissioning and operator training at buyer's facility; 24/7 remote PLC VPN diagnostic support for 90 days post-commissioning with 2-hour software response SLA; same-day Korean spare parts dispatch; scheduled preventive maintenance on annual service contract. In-country service response capability at the EP-ZQ80 machine class where unplanned downtime in pharmaceutical three-shift production directly impacts batch release schedules and customer delivery commitments.

Q8: What PCTG optical quality does EP-ZQ80 with S136 SPI A1 tooling achieve?

0.8–1.6% ASTM D1003 integrating sphere haze at 0.5–0.6 mm body wall, verified on Korea Ever-Power ZQ-series T1 trials with PCTG Eastman TX1001 at 252 °C barrel and 20 °C blow mould cooling. This sub-2% haze is the glass-look optical specification Korean luxury K-beauty cosmetic dropper vial brands require and Bloma IBM85-class standard H13 tooling cannot achieve. The S136 SPI A1 upgrade is available as a standard option on every EP-ZQ80 order.

Q9: How does EP-ZQ80's 800mm platen enable 20 cavities at 10ml versus Bloma IBM85's 620mm platen?

At 10 ml format with typical mandrel centre-to-centre spacing of 36–38 mm: EP-ZQ80's 800 mm effective platen width accommodates 20 mandrel positions in a single row (20 × 38 mm = 760 mm, within 800 mm limit); Bloma IBM85's 620 mm platen accommodates approximately 16 positions (16 × 38 mm = 608 mm, within 620 mm limit). The Korea Ever-Power ZQ80 specification confirms 20 cavities at 10 ml; Bloma IBM85-class cavity count at 10 ml is not published but is constrained by the 620 mm platen width. At Korean luxury K-beauty eye serum dropper production where each additional cavity reduces cost per bottle by 5–8% at full commercial volume, the 4-cavity difference between EP-ZQ80 and Bloma IBM85-class platen geometry is a significant competitive advantage per unit of capital investment.

Q10: Which Korea Ever-Power model replaces Bloma IBM135 for buyers scaling beyond EP-ZQ80?

EP-ZQ110 (1,100 kN, screw 65 mm, max shot 540 g, platen 1100 × 460 mm, total power 80 kW, machine 5.0 × 1.8 × 2.2 m, 15 T) replaces Bloma IBM135-class (1,250 kN, screw 70 mm, shot 560 g, platen 900 × 480 mm, height 2.55 m). Dedicated comparison page in the IBM 장비 교체 가이드.