HGY150-V4-B ISBM Machine — Alternative to AOKI SBIII-100L

The Korea Ever-Power HGY150-V4-B is the B-series version of the HGY150-V4 platform, a 4-station one-step injection stretch blow moulding machine designed to operate in the AOKI SBIII-100L capacity class. The distinction between the standard HGY150-V4 and the HGY150-V4-B lies in the platen geometry: the B-series carries the extended mold stroke dimensions and platen mounting configuration that match the AOKI SBIII-100L mounting standard, allowing factories with existing AOKI 100L tooling to switch to the HGY150-V4-B without mould modification, adapter plates, or re-qualification spend.

The AOKI SBIII-100L is primarily used across Korea, Japan, and Southeast Asia for precision small-to-mid-format containers: cosmetic bottles, pharmaceutical vials, personal care dispensers, and baby care containers in the 20 ml to 500 ml range. The HGY150-V4-B covers this exact production window at 150 KN injection clamping and up to 8 cavities per cycle. Its injection ceiling — up to 480 cm³ at ø60 mm screw — exceeds what the AOKI SBIII-100L class typically offers, giving the machine headroom for heavier-wall formats that sit at the top of the 100L's range.

Three advantages define the HGY150-V4-B against the AOKI SBIII-100L: direct mould compatibility at zero re-tooling cost, higher injection output ceiling, and 45–75 day delivery. Korea Ever-Power provides a written AOKI SBIII-100L mould compatibility review within 5 working days at no charge when mould drawings are submitted. See the full ISBM machine replacement guide for the complete Korea Ever-Power lineup.

HGY150-V4-B — 4-Station ISBM, AOKI SBIII-100L Class

Cosmetic and K-Beauty — Precision Small-Format Bottles

Serum vials, essence bottles, toner dispensers, and eye cream containers from 20 ml to 200 ml in PET and PETG represent the core production format on AOKI SBIII-100L lines in Korea and Japan. The HGY150-V4-B covers this full range at 4 to 8 cavities on existing AOKI 100L tooling. The one-step ISBM process delivers the neck-finish precision and wall-thickness uniformity that premium cosmetic packaging requires — without the preform reheating step that two-step SBM processes introduce between injection and blow.

Pharmaceutical — Oral Liquid Vials and Dropper Bottles

Oral liquid dispensing vials, eyedrop bottles, nasal spray containers, and single-dose pharmaceutical packaging from 20 ml to 100 ml in PET and PETG. Neck-finish dimensional consistency is the critical quality parameter for pharmaceutical dispensing containers, and the one-step ISBM process maintains that consistency across all cavity positions without the dimensional drift that reheat stretch blow processes introduce over a production shift. 5 to 8 cavities for standard pharmaceutical small-format. Regulatory documentation available on request.

Personal Care and Baby Care — Travel-Size and Infant Containers

Travel-size personal care containers from 30 ml to 100 ml, hotel amenity bottles, and baby care dispensers in PET and PETG from 50 ml to 300 ml. The AOKI SBIII-100L capacity class is widely used for this format range across Korean, Japanese, and Southeast Asian personal care contract manufacturers. The HGY150-V4-B runs the same AOKI 100L mould tooling at faster cycle speed and with a higher injection ceiling, delivering more bottles per shift without any tooling investment.

Q1: Can my existing AOKI SBIII-100L mould tooling be used directly on the HGY150-V4-B?

Yes. The HGY150-V4-B B-series platen is designed to match the AOKI SBIII-100L mounting standard. Submit your AOKI SBIII-100L mould drawings or photographs for a written compatibility review within 5 working days at no charge. Korea Ever-Power confirms exact mold stroke and adapter requirements during the review, and supplies any minor adapter hardware for older mould generations at no additional cost.

Q2: What is the difference between HGY150-V4 and HGY150-V4-B?

Both share the same injection unit, drive system, and core capacity parameters (150 KN injection clamping, 53.2 KW total power). The difference is in the platen configuration: the standard HGY150-V4 is dimensioned to match the NISSEI ASB-12M mounting standard, while the HGY150-V4-B carries the extended platen geometry and mold stroke dimensions that match the AOKI SBIII-100L mounting standard. Choose HGY150-V4 if your existing tooling or intended new tooling follows ASB-12M dimensions; choose HGY150-V4-B if your tooling follows AOKI SBIII-100L dimensions.

Q3: What output improvement does HGY150-V4-B deliver over the AOKI SBIII-100L?

The HGY150-V4-B reaches 480 cm³ maximum injection volume at o60 mm screw and 270 rpm screw speed at o40 mm. The faster screw speed shortens the plasticising phase per cycle, reducing total cycle time and increasing bottles per shift on the same AOKI 100L mould set. The larger injection ceiling allows heavier-wall formats that exceed the AOKI SBIII-100L's practical injection capacity. Korea Ever-Power can model projected output improvement for your specific container and preform weight on request.

Q4: What is the delivery lead time?

45–75 working days from order confirmation and deposit. A production milestone schedule is provided with each order confirmation.

Q5: Is on-site commissioning and operator training included?

Yes, for Korea and SEA customers. A Korea Ever-Power engineer installs the machine, mounts the AOKI SBIII-100L mould tooling, runs first-production samples to specification, and completes operator training before departure.

Q6: What materials does HGY150-V4-B process?

Standard: PET and PETG including rPET at IV 0.72–0.84 dl/g. For PP, PC, Tritan, or PPSU, contact Korea Ever-Power with the specific resin datasheet.

Q7: What spare parts availability looks like post-purchase?

5-year availability commitment. Parker valves, NSK lead screws, YUKEN hydraulic valves, and Yaskawa / WEICHI servo components are stocked by regional distributors — same-day or next-day in most markets. A recommended spare parts kit ships with each machine.

Q8: What warranty applies?

12-month parts warranty from commissioning sign-off. Structural components carry a 3-year warranty. Remote diagnostic support within 4 business hours. Engineer dispatch within 5 business days for hardware faults not resolvable remotely.

Q9: Is there also a 3-station version for the AOKI SBIII-100L class?

Yes. The Korea Ever-Power HGY150-V3-B is the 3-station version of this machine in the same AOKI SBIII-100L capacity class, operating on a 3-station rotary platform (Injection / Stretch Blow / Take-out, without a dedicated conditioning station). Contact Korea Ever-Power for details on the HGY150-V3-B if your existing AOKI SBIII-100L is a 3-station configuration.

Q10: What certifications does HGY150-V4-B carry?

CE marking and ISO 9001:2015 are standard. CE Declaration of Conformity is available for review before order confirmation. Machine data sheet and factory acceptance test report on buyer-specified resin and cavity format are supplied at delivery.