HGY150-V3-B ISBM Machine — Alternative to AOKI SBIII-100L (3-Station)

The Korea Ever-Power HGY150-V3-B is a compact 3-station one-step injection stretch blow moulding machine in the AOKI SBIII-100L capacity class, built to accept AOKI SBIII-100L 3-station mould tooling directly. Where the HGY150-V4-B runs a 4-station platform with a dedicated conditioning station, the HGY150-V3-B completes the full ISBM cycle across 3 stations — Injection, Stretch Blow, and Take-out — on a smaller rotary footprint. This matches the production architecture of AOKI SBIII-100L 3-station installations used across Korea, Japan, and Southeast Asia for cosmetic, pharmaceutical, and personal care containers from 20 ml to 500 ml. At 150 KN injection clamping and up to 6 cavities per cycle, the HGY150-V3-B delivers direct mould compatibility with the AOKI 100L 3-station tooling, a higher injection ceiling than the reference machine, and 45-75 day delivery with on-site commissioning included. PET and PETG. CE + ISO 9001:2015. Contact Korea Ever-Power with your AOKI SBIII-100L 3-station mould drawings for a written compatibility review within 5 working days at no charge.

Category: ISBM Machine Replacement

Inquire Now

Description
Additional information

Selection Reference Notice: "AOKI" and "SBIII-100L" are trademarks of Aoki Technical Laboratory Co., Ltd., referenced solely to help buyers identify the Korea Ever-Power HGY150-V3-B as a comparable alternative in the same one-step ISBM capacity class. Korea Ever-Power does not manufacture, distribute, or represent Aoki products. All technical data on this page refers exclusively to the Korea Ever-Power HGY150-V3-B.

Product Overview

HGY150-V3-B 3-station compact ISBM machine Korea Ever-Power AOKI SBIII-100L alternative

3-Station vs 4-Station — What Changes and What Does Not

What the 3-station cycle does differently:

The HGY150-V3-B operates on a 3-station rotary platform: Station 1 injects the preform; Station 2 simultaneously blows and stretches using the residual injection heat with a short heat-preservation / tail-cutting step; Station 3 takes out the finished bottle. There is no dedicated temperature conditioning station between injection and blow. This makes the cycle faster per rotation and the machine footprint smaller — at the cost of less independent temperature adjustment between injection and blow compared to a 4-station machine.

What stays the same as the HGY150-V4-B:

Injection clamping force (150 KN), injection capacity and screw specification, blow clamping force, AOKI SBIII-100L B-series mould compatibility, drive system, key components (Parker, NSK, YUKEN, Yaskawa), total power, and the three core competitive advantages: mould drop-in at zero re-tooling cost, higher injection ceiling than the AOKI 100L reference, and 45–75 day delivery.

The Korea Ever-Power HGY150-V3-B is the 3-station version of the HGY150 B-series platform — a compact one-step injection stretch blow moulding machine in the AOKI SBIII-100L capacity class, designed to accept AOKI SBIII-100L 3-station mould tooling without modification or adapter plates. The V3 designation indicates the 3-station rotary configuration, which matches the production architecture used in AOKI SBIII-100L 3-station installations across Korea, Japan, and Southeast Asia. Factories replacing an end-of-life AOKI SBIII-100L 3-station machine carry their validated 3-station tooling directly to the HGY150-V3-B.

The 3-station format is typically chosen where: floor space is constrained; the production container has wall geometry that tolerates shorter temperature-adjustment windows; or the production volume target is best served by a faster per-cycle rotation speed rather than the conditioning precision of a 4-station machine. For simple-profile cosmetic, personal care, and pharmaceutical containers from 20 ml to 500 ml in PET and PETG where wall-thickness tolerance is not at pharmaceutical precision-closure levels, the 3-station cycle delivers the same one-step ISBM quality at a more compact machine scale.

At 150 KN injection clamping and up to 6 cavities per cycle on the 3-station platform, the HGY150-V3-B covers the core AOKI SBIII-100L production range. Contact Korea Ever-Power with your AOKI SBIII-100L 3-station mould drawings for a written compatibility review within 5 working days at no charge. See the full ISBM machine replacement guide.

3-Station

Compact rotary platform
AOKI SBIII-100L V3 match

150 KN

Injection clamping
AOKI 100L class

480 cm³

Max injection volume
exceeds 100L ceiling

Technical Specifications

Parameter Note: The HGY150-V3-B 3-station machine shares the core injection and drive specification of the HGY150 platform. Exact mold stroke values for the 3-station B-series configuration are confirmed by Korea Ever-Power during the mould compatibility review. Contact Korea Ever-Power with your AOKI SBIII-100L 3-station mould drawings to initiate the review at no charge within 5 working days.

Parameter	HGY150-V3-B
Machine Layout	3-station rotary — Injection / Stretch Blow / Take-out
Platen Configuration	B-series — AOKI SBIII-100L 3-station mounting standard
Drive System	3 sets servo pump systems (Inovance / WEICHI, 43.2 KW)
Screw Diameter	50 mm standard (40 / 55 / 60 mm optional)
Theoretical Injection Volume	188 cm³ (o40) / 310 cm³ (o50) / 380 cm³ (o55) / 480 cm³ (o60)
Injection Capacity (o50 standard)	310 g (480 cm³ max at o60 mm — exceeds AOKI 100L ceiling)
Screw Rotational Speed	270 rpm (o40) / 180 rpm (o50) / 150 rpm (o55) / 150–220 rpm (o60)
Injection Clamping Force	150 KN
Blowing Clamping Force	200 KN (single side)
Conditioning Station	Not present — 3-station cycle uses residual injection heat directly at blow station
Mold Stroke (B-series)	Sized to AOKI SBIII-100L 3-station mounting standard — confirm with Korea Ever-Power
Motor Power	43.2 KW
Heating Power	10 KW (nano far-infrared energy-saving heating ring)
Total Installed Power	53.2 KW
Blowing Air Pressure	2.0 – 3.5 MPa
Cooling Water Pressure	0.4 – 0.6 MPa
Voltage	370 – 400 V
Max Cavities	Up to 6 cavities (3-station configuration)
Bottle Volume Range	20 ml – 500 ml (typical 3-station AOKI 100L range)
Compatible Materials	PET, PETG
AOKI 100L 3-Station Mold Fit	Compatible with AOKI SBIII-100L 3-station moulds — B-series direct mount
Key Components	Parker valves (USA) · NSK lead screws (Japan) · YUKEN hydraulic valves (Taiwan) · Yaskawa / WEICHI servo turntable · Airtak cylinders
Certification	CE + ISO 9001:2015

Bottle Cavity Range — HGY150-V3-B (3-Station, up to 6 cavities)

Cavities	Body Dia. (mm)	Neck Dia. (mm)	Max Volume (ml)	Max Weight (g)
1	118	83	500	130
2	80	62	300	65
3	66	48	200	43
4	56	38	100	32
5	45	32	50	26
6	38	25	20	22

3-Station vs 4-Station — Which Platform Fits Your Production

Choose HGY150-V3-B (3-Station) when:

✓Your existing AOKI SBIII-100L is a 3-station model and your validated 3-station tooling needs to carry over

✓Floor space is constrained — the 3-station platform has a smaller rotary diameter and overall footprint

✓Container wall geometry is straightforward — single-layer PET and PETG bottles where an independent conditioning station is not required for wall distribution

✓Production priority is cycle speed per rotation and lower capital cost over maximum wall-thickness conditioning control

Choose HGY150-V4-B (4-Station) when:

✓Your existing AOKI SBIII-100L is a 4-station model, or you want the 4-station platform for future flexibility

✓Container requires the independent conditioning station for precise wall temperature control — thin-wall PETG, neck-finish-critical pharmaceutical droppers

✓Cavity count above 6 is needed — the 4-station platform supports up to 8 cavities

✓Container volume range extends above 500 ml — the 4-station platform handles up to 2,500 ml

HGY150-V3-B vs AOKI SBIII-100L — Parameter Comparison

Parameter	Korea Ever-Power HGY150-V3-B	AOKI SBIII-100L 3-Station (Reference)
Machine Layout	3-Station ISBM, B-Series	3-Station ISBM (SBIII-100L)
Inj. Clamping Force	150 KN	N/A (not published)
Max Injection Capacity	480 cm³ (o60) / 310 g (o50 std) higher output ceiling	N/A (not published)
Screw Speed	Up to 270 rpm (o40) faster cycle	N/A (not published)
Blow Clamping Force	200 KN (single side)	N/A (not published)
Mold Interchangeability	AOKI SBIII-100L 3-station direct mount — no re-tooling	OEM tooling only
Max Cavities	6 cavities (3-station platform)	N/A (not published)
Total Installed Power	53.2 KW	N/A (not published)
Delivery Lead Time	45 – 75 days	Multi-month (new machine)
Spare Parts	Open-market (Parker, NSK, YUKEN, Yaskawa)	OEM-only
On-Site Commissioning	Included (Korea, SEA)	At extra cost
Certification	CE + ISO 9001:2015	CE

Technical Note: The above cross-reference is intended as a general model comparison based on machine capacity, configuration, and typical application range. Actual compatibility depends on container specifications, neck finish, resin material, cavity configuration, mold dimensions, injection unit capacity, clamping force, and production requirements. Final machine selection should be confirmed against the customer's bottle samples, mold drawings, and required output. Korea Ever-Power provides a written compatibility review within 5 working days at no charge.

Application Scenarios

Cosmetic serum personal care bottles 3-station ISBM Korea Ever-Power HGY150-V3-B

Cosmetic and Personal Care — Compact Format Bottles

Serum vials, toner bottles, facial wash dispensers, and essence containers from 20 ml to 200 ml in PET and PETG. The 3-station cycle is a proven format for simple-geometry cosmetic containers where the injection heat is sufficient for consistent blow quality without a dedicated conditioning step. 3 to 6 cavities on existing AOKI SBIII-100L 3-station tooling. Compact footprint particularly suited to Korean and Japanese contract cosmetic manufacturers with space-constrained production floors.

Pharmaceutical oral liquid vials small-format 3-station ISBM Korea Ever-Power HGY150-V3-B

Pharmaceutical — Oral Liquid and Standard Dispensing Vials

Oral liquid vials, cough syrup bottles, and standard dispensing containers from 30 ml to 200 ml in PET and PETG where neck-finish dimensional requirements are standard rather than precision-dropper grade. The 3-station ISBM cycle delivers consistent neck finish at production speed suitable for tablet-bottle and oral liquid filling lines. 2 to 5 cavities. For precision-closure pharmaceutical applications requiring tighter wall-thickness tolerance, the HGY150-V4-B 4-station with dedicated conditioning station is recommended instead.

Baby care infant bottles travel personal care 3-station ISBM Korea Ever-Power HGY150-V3-B

Baby Care and Travel-Size Personal Care

PETG baby lotion bottles, infant soap dispensers, and travel-size personal care containers from 50 ml to 300 ml. For baby care containers where clarity and material safety are the primary requirements rather than extreme wall-thickness precision, the 3-station cycle delivers consistent production at a competitive capital cost. 2 to 4 cavities for standard baby care format ranges on AOKI SBIII-100L 3-station tooling.

Korea Ever-Power ISBM Series — Model Selector

Parameter	HGY150-V4	HGY150-V4-B	HGY150-V3-B ★	HGYS150-V4-EV	HGY200-V4-B
Stations	4-station	4-station	3-station ▲	4-station	4-station
Mold Standard	ASB-12M	AOKI SBIII-100L	AOKI SBIII-100L V3	ASB-12M	AOKI SBIII-250LL
Max Cavities	8	8	6	8	12
Inj. Clamp	150 KN	150 KN	150 KN	150 KN	300 KN
Drive	3 servo pumps	3 servo pumps	3 servo pumps	10 full servo	3 servo pumps
Total Power	53.2 KW	53.2 KW	53.2 KW	112.8 KW	64.2 KW

HGY150-V3-B 3-station ISBM mould tooling AOKI SBIII-100L compatible B-series

Frequently Asked Questions

Q1: Can my existing AOKI SBIII-100L 3-station mould tooling be used on the HGY150-V3-B?

Yes. The HGY150-V3-B B-series platen is designed to match the AOKI SBIII-100L 3-station mounting standard. Submit your AOKI SBIII-100L 3-station mould drawings for a written compatibility review within 5 working days at no charge. Korea Ever-Power confirms exact mold stroke values and any adapter requirements during the review process.

Q2: What is the practical difference between the 3-station and 4-station cycle for bottle quality?

The 4-station cycle has a dedicated conditioning station between injection and blow, which allows independent temperature adjustment of different preform zones before the stretch blow step. This enables tighter wall-thickness control on complex geometry containers, thick-walled pharmaceutical droppers, and thin-wall PETG bottles where temperature gradient during blow significantly affects wall distribution. The 3-station cycle uses residual injection heat directly at the blow station, which delivers consistent wall quality for standard-geometry PET and PETG containers. If your existing AOKI SBIII-100L is a 3-station model and your container validation history was established on it, the HGY150-V3-B is the direct production-architecture replacement.

Q3: What output improvement does HGY150-V3-B deliver over the AOKI SBIII-100L 3-station reference?

The HGY150-V3-B reaches 480 cm³ maximum injection volume at o60 mm screw and 270 rpm screw speed at o40 mm. The faster screw speed shortens plasticising per rotation, reducing cycle time and lifting bottles per shift on the same AOKI 100L 3-station tooling. The larger injection volume ceiling allows heavier-wall container formats that the AOKI SBIII-100L class approaches but may not comfortably run. Korea Ever-Power can model projected output improvement for your specific container on request.

Q4: Why does the 3-station platform support up to 6 cavities versus 8 for the 4-station?

The 3-station rotary platform has three station positions on the turntable versus four on the 4-station. With one fewer station position, the platen width available at the blow station is effectively the limiting factor for maximum cavity count at the injection capacity class of the HGY150 platform. The maximum 6-cavity configuration on the HGY150-V3-B corresponds directly to the practical maximum on AOKI SBIII-100L 3-station installations in the same production format range.

Q5: What is the delivery lead time?

45–75 working days from order confirmation and deposit. A production milestone schedule is provided with each order confirmation.

Q6: Is on-site commissioning included?

Yes, for Korea and SEA customers. A Korea Ever-Power engineer installs the machine, mounts the AOKI SBIII-100L 3-station mould tooling, validates first-production samples to specification, and completes operator training including 3-station process parameter setup, daily maintenance, and fault diagnosis before departure.

Q7: What materials does HGY150-V3-B process?

Standard: PET and PETG including rPET at IV 0.72–0.84 dl/g. The 3-station cycle is particularly suited to standard-grade PET where residual injection heat is sufficient for consistent blow quality. For PP, PC, or Tritan in 3-station ISBM, contact Korea Ever-Power with the resin datasheet — the absence of a dedicated conditioning station means resin-specific thermal window requirements should be reviewed before confirming 3-station suitability.

Q8: What spare parts availability looks like post-purchase?

5-year availability commitment. Parker valves, NSK lead screws, YUKEN hydraulic valves, and Yaskawa / WEICHI servo components are stocked by regional distributors — same-day or next-day in most markets. A recommended spare parts kit ships with each machine.

Q9: What warranty applies?

12-month parts warranty from commissioning sign-off. Structural components carry a 3-year warranty. Remote diagnostic support within 4 business hours. Engineer dispatch within 5 business days for hardware faults not resolvable remotely.

Q10: What certifications does HGY150-V3-B carry?

CE marking and ISO 9001:2015 are standard. CE Declaration of Conformity is available for review before order confirmation. Machine data sheet and factory acceptance test report on buyer-specified resin and cavity format are supplied at delivery.

Replace Your AOKI SBIII-100L 3-Station — Get a Compatibility Review

Send Korea Ever-Power your AOKI SBIII-100L 3-station mould drawings, container specification, resin grade, and required output. Written mould compatibility review returned within 2 business days at no charge.

📧 Send Enquiry
📄 All Replacement Models
CE + ISO 9001:2015 · 45–75 day delivery · On-site commissioning included