HGA.ES-6C114

6-Cavity Enhanced Servo Stretch Blow Molding Machine  ·  PET / PETG  ·  5,400 bph  ·  Max 94 mm Body  ·  CE + ISO 9001:2015

The HGA.ES-6C114 is the highest-output machine in the HGA.ES 114 mm pitch family — delivering 5,400 bph across six simultaneous cavities for medium-body cosmetic and daily chemical bottles up to 94 mm body diameter and 1,500 ml volume. At 5,400 bph it produces 63% more bottles per hour than the 4-cavity HGA.ES-4C114 (3,300 bph) and is the only 6-cavity ES option in the medium-body 114 mm pitch category.

Six simultaneous medium-body cavities at 94 mm diameter represent the most demanding ES servo timing scenario in the HGA.ES 114 mm pitch family. At 5,400 bph with six heavier medium-body preforms advancing per cycle, any timing variance in the blow sequence, stretch rod advance, or take-out propagates across all six positions simultaneously. The ES drive maintains the consistent inter-cavity timing that prevents systematic wall-thickness drift across the six-position production lot — quality consistency that standard servo systems at this cavity count and preform mass cannot reliably deliver.

At 5,400 bph, the 6C114 delivers 63% more throughput than the 4-cavity HGA.ES-4C114 (3,300 bph) and 125% more than the 3-cavity HGA.ES-3C114 (2,400 bph). For the highest-volume medium-body shampoo, conditioner, and daily chemical production where 94 mm body diameter is the specification and 4-cavity throughput cannot meet production schedule targets, the 6C114 provides the throughput step-up without moving to a larger pitch. A single 6C114 replaces the combined output of approximately 1.6 units of the 4-cavity 4C114.

At 1,500 ml maximum volume, the 6C114 matches the 3-cavity 3C114's volume ceiling — higher than the 4-cavity configurations (1,000–1,300 ml) — while delivering more than double the 3C114's throughput. For production operations requiring maximum medium-body volume at 6-cavity output rate, the 6C114 delivers the largest bottles available at this cavity count in the 114 mm pitch ES family. The dual height configuration (250/330 mm) and dual stretching stroke (350/450 mm) cover both standard and tall bottle formats within the 94 mm body and 1,500 ml volume envelope.

The 96-position holder provides consistent infrared conditioning for six simultaneous medium-body preform streams at 114 mm pitch. At 5,400 bph production rate with six heavier 94 mm-body preforms advancing per cycle, the holder must maintain temperature uniformity across all 96 positions and six simultaneous streams continuously. The zone-level digital infrared control system and 72 KW maximum heating power (the highest in the HGA.ES 114 mm pitch family) support the conditioning demand of six medium-body streams at this cycle rate.

The 9,500 L/min high-pressure air requirement is the highest in the HGA.ES cosmetic series across all machines and pitch configurations. It reflects six simultaneous medium-body blow cycles at 35 kg/cm² — the aggregate air demand of 5,400 bph at 94 mm body scale. A dedicated industrial oil-free compressor system rated for sustained 9,500 L/min delivery is required. Obtain the full utility specification from Ever-Power at the pre-purchase consultation stage — the compressor infrastructure timeline is the longest lead item in facility preparation for this machine.

Commissioning the 6C114 covers 96-position holder indexing calibration at 114 mm pitch, infrared zone balancing for six simultaneous medium-body preform streams, ES servo parameter setup for 6-cavity blow station timing, height configuration setup for the selected 250 mm or 330 mm option, and systematic inter-cavity uniformity verification from all six positions at 5,400 bph cycle rate. Factory acceptance test samples from all six cavities are inspected for inter-cavity weight, wall-thickness, and dimensional uniformity before shipment.

High-volume FMCG shampoo and conditioner from 300 ml to 1,500 ml at 94 mm body diameter in PET and PETG, with neck closures up to 68 mm. Large-scale filling lines for major personal care brands where 94 mm body is the product specification and 4-cavity throughput cannot cover production schedule demands. At 5,400 bph with standard-neck closures up to 68 mm, the 6C114 serves the highest-volume 94 mm body shampoo and conditioner production available in the HGA.ES series at this pitch.

Large-format body wash and shower gel from 400 ml to 1,500 ml at 94 mm body diameter with standard screw-cap or flip-top closures up to 68 mm neck. High-volume cosmetic filling operations where the bottle closure specification is within the 68 mm neck limit and 6-cavity ES output at 5,400 bph is required. For K-beauty and cosmetic OEM operations with standard-neck formats and very high volume targets, the 6C114 provides the maximum throughput at 114 mm pitch for this closure category.

High-volume daily chemical — liquid soap, fabric softener, and household cleaning products — from 500 ml to 1,500 ml at 94 mm body diameter with standard closures up to 68 mm neck in PET. Large-scale daily chemical production lines where 94 mm body diameter is the product specification and per-shift output targets require 6-cavity throughput. The 1,500 ml volume ceiling covers the full standard daily chemical retail bottle range at this body diameter.

Large-scale OEM packaging suppliers producing medium-body PET and PETG bottles at 94 mm diameter with standard-neck closures up to 68 mm for multiple cosmetic and daily chemical brand clients at 5,400 bph ES quality. A single 6C114 replaces the throughput of approximately 1.6 units of the 4-cavity 4C114 — a significant machine count, floor space, and utility cost reduction per unit of output for OEM operations where all client bottle formats are within the 68 mm neck and 1,500 ml volume specification.

Blowing pressure: 35 kg/cm² · Min. flow: 9,500 L/min — highest in the HGA.ES series · Dedicated industrial oil-free compressor system required

Cooling water: 8–12 °C · Min. flow: 40 L/min · Stable temperature for consistent 6-cavity medium-body quality at 5,400 bph

Operating pressure: 7 kg/cm² · Flow: 1,000 L/min · For preform conveying, cooling air, and mold actuation across 6 cavities at 114 mm pitch

✅

🔧

🏠

👥

"We produce shampoo and conditioner from 400 ml to 1,200 ml at 92 mm body, standard 38 mm screw cap, for a major FMCG client. We previously ran two HGA.ES-4C114 machines to meet the weekly volume target. One 6C114 gives us 5,400 bph — slightly more than the two 4-cavity machines combined. We freed up one machine bay and reduced the compressor load from two separate units to one larger dedicated system. Inter-cavity uniformity across all six cavities has been consistent since commissioning."

Machine: HGA.ES-6C114

"We run 330 mm tall conditioner bottles at 1,400 ml — 94 mm body, 55 mm flip-top neck. The 6C114 330 mm height configuration covers our bottle. The 450 mm stretching stroke option is correctly specified for this height. We verified the height and stroke configuration with Ever-Power before ordering tooling — this step is mandatory for the dual-height models. Machine output at 5,400 bph matches our filling line capacity. Quality consistent since startup."

Machine: HGA.ES-6C114

"We manufacture fabric softener and liquid detergent at 800 ml and 1,500 ml in PET for retail and bulk distribution. Standard 48 mm screw cap — within the 68 mm neck limit. The 6C114 at 5,400 bph is the correct machine for our volume target at this body diameter. Infrastructure planning was extensive: the 9,500 L/min compressor requirement, the 6,500 kg floor load, the electrical circuit upgrade. Ever-Power provided a complete pre-purchase utility document that we submitted directly to our facility contractor. Smooth installation as a result."

Machine: HGA.ES-6C114

"We initially specified the 6C114 for a product requiring a 75 mm wide pump-top neck. The Ever-Power application team identified during pre-purchase consultation that 75 mm exceeds the 6C114's 68 mm neck limit — we would have commissioned tooling for an incompatible machine. We moved to the 4-cavity 4C114 which covers 88 mm neck. The consultation process caught this before any cost was incurred. Check your neck diameter specification carefully before selecting any 6-cavity ES machine."

Note: Redirected to HGA.ES-4C114

Q1: My bottle requires an 80 mm pump-top neck at 94 mm body diameter. Can I use the 6C114?

No. The 6C114 maximum neck diameter is 68 mm. For a bottle requiring an 80 mm neck at 94 mm body diameter, the correct selection is the 4-cavity HGA.ES-4C114 (max 88 mm neck, 3,300 bph) or the HGA.ES-4C114.3 (max 88 mm neck, 4,000 bph). The 6C114 only applies when all bottle neck diameters are at or below 68 mm at 114 mm pitch. Always confirm neck diameter before selecting a 6-cavity configuration.

Q2: What does the dual stretching stroke of 350/450 mm mean?

The 6C114 is available in two stretching stroke configurations: 350 mm stroke for bottles up to 250 mm height, and 450 mm stroke for bottles up to 330 mm height. The mold-close distance is 200 mm for both. Confirm your required bottle height and the corresponding stroke and mold design with Ever-Power before ordering tooling — mixing up the stroke configuration and mold design is a common pre-purchase error on dual-height models that Ever-Power's application team checks during pre-purchase consultation.

Q3: What compressor system is required for 9,500 L/min at 35 kg/cm²?

9,500 L/min at 35 kg/cm² is beyond the capacity of a single standard industrial high-pressure compressor. A dedicated compressor system — either a large-capacity single unit or two compressors in parallel — sized specifically for this sustained output is required. An oil-free compressor system is mandatory for cosmetic bottle production. Ever-Power provides a compressor specification document with detailed capacity and connection requirements at the pre-purchase consultation — request this document before finalising any compressor procurement.

Q4: How does the 6C114 compare to running two HGA.ES-4C114 machines?

One 6C114 (5,400 bph) versus two HGA.ES-4C114 units (6,600 bph combined) — the two-machine setup produces 22% more bottles per hour. However: the 6C114 requires one machine operator, one compressor system, and one machine bay. Two 4C114 machines require two operators, two compressor systems, and two bays — substantially higher capital cost, utility infrastructure cost, and facility footprint. The 6C114 is the correct selection when 5,400 bph meets the production target; two 4C114 machines are preferred when 6,600 bph is required and the added machine complexity is acceptable.

Q5: What floor load capacity is required?

The machine weighs 6,500 kg on a 5,300 mm x 2,150 mm footprint — approximately 570 kg/m² distributed load. Confirm floor load capacity with a structural engineer before installation. Ever-Power provides the full machine load specification document on request for structural assessment.

Q6: What after-sales support is available?

Remote technical support during business hours with engineers experienced in 6-cavity medium-body ES commissioning. 5-year spare parts availability commitment. On-site engineer dispatch for faults not resolvable remotely. At 5,400 bph, production downtime has proportionally higher commercial impact — Ever-Power prioritises response time for 6C114 customers accordingly. The commissioning engineer is available for follow-on site visits if inter-cavity uniformity issues arise during production ramp-up.

Same pitch and body diameter at 4-cavity ES — 88 mm neck range, 3,300 bph. The correct selection when neck diameter is between 68 mm and 88 mm at 114 mm pitch.

View HGA.ES-4C114 →

Same 6-cavity ES configuration at 76 mm pitch for slim bottles up to 68 mm body — 7,200 bph for the highest-output slim-bottle production in the HGA.ES series.

View HGA.ES-6C76 →

Browse the complete Ever-Power HGA cosmetic and daily chemical blow molding series across all cavity counts and pitch configurations.

View Full Series →