HGA.FS-2CG220 Cosmetic & Daily Chemical Wide-Mouth Jar Blow Molding Machine

HGA.FS-2CG220

2-Cavity Servo Blow Molding Machine  ·  Ultra-Large Wide-Mouth Jar  ·  PET / PETG  ·  Max 195 mm Body  ·  CE + ISO 9001:2015

The HGA.FS-2CG220 is the highest-capacity model in the HGA.FS wide-mouth jar series — the only 2-cavity configuration in the FS range. It produces the largest containers in the HGA cosmetic series: up to 195 mm body diameter, 182 mm neck diameter, and 10,000 ml volume. The 2-cavity configuration delivers higher output than the single-cavity FS models at ultra-large jar scale, making it suitable for institutional and industrial supply volumes that the 1-cavity models cannot efficiently serve alone.

The FS-2CG220 is the only 2-cavity machine in the HGA.FS series — running two 220 mm pitch cavities simultaneously to deliver 600–900 pph theoretical output at ultra-large container scale. At 10,000 ml maximum volume and 195 mm body diameter, 2-cavity running serves institutional supply volumes that single-cavity 1CG196 production cannot efficiently meet. Both cavities share a common preform holder, infrared heating system, and process parameter set — ensuring consistent wall-thickness distribution across both cavities within each production lot.

The 195 mm maximum body diameter is the largest in the entire HGA cosmetic and daily chemical machine range — including all HGA.AS, HGA.ES, and HGA.FS models. At this diameter, the container is a true canister or tub format — closer in scale to an institutional supply drum than a standard cosmetic jar. The 220 mm pitch that enables this body diameter is also the widest in the HGA series, placing the FS-2CG220 at the upper boundary of what linear stretch blow molding serves in the cosmetic packaging category.

The 182 mm maximum neck diameter is the widest in the HGA.FS range — wider than a standard A5 sheet of paper. Containers with 182 mm neck openings are bulk supply vessels: the opening accommodates full-hand access, large ladles or scoops, direct pump installation, and industrial dispensing fittings. Applications include institutional 10-litre body care supply, professional bulk salon product containers, industrial chemical compound canisters, and specialty large-format packaging where the container is as much a supply vessel as a retail presentation format.

At 10,000 ml — 10 litres — the HGA.FS-2CG220 reaches the institutional bulk supply scale: hotel and resort amenity body care supply in 10-litre tubs, large-format salon conditioning treatment in bulk supply jars, industrial cleaning compound and chemical compound in large-neck PET canisters, and specialty ingredient supply in transparent PETG bulk containers. At 600–900 pph across 2 cavities, the machine produces up to 9,000 litres of container volume per hour at maximum capacity — a throughput that serves institutional supply volumes at cost-effective production rates.

Ultra-large wide-mouth jar preforms at 182 mm neck diameter carry some of the heaviest preform mass in the FS series. The infrared heating system must condition this mass to a consistent through-wall temperature before the blow station — zone-level power control allows independent adjustment across the preform height zones that the 220 mm pitch ultra-large preform geometry requires. This zone-by-zone precision is particularly important for 2-cavity running, where consistent preform temperature across all 30 holder positions determines cavity-to-cavity uniformity across the production lot.

The HGA.FS-2CG220 is Ever-Power's most specialised machine for cosmetic and daily chemical applications. Commissioning is handled by engineers with specific large-format FS machine experience — covering 220 mm pitch mold mounting, 2-cavity preform holder calibration, infrared zone setup for ultra-large preform geometry, servo timing for the wide-mouth jar blow sequence, and operator training. A preform design consultation is included as standard with every machine purchase and is strongly recommended before tooling order at this format scale.

10-litre body lotion tubs, institutional spa product supply containers, hotel amenity back-of-house bulk packaging, and resort hospitality body care supply in PET and PETG. The 182 mm neck diameter enables the wide-mouth access required for direct pump installation and bulk dispensing system integration at hospitality scale. PETG for branded premium hospitality presentation; PET for standard institutional supply.

10-litre professional salon product bulk supply containers — conditioning treatment, colour care, bleaching compound, and treatment product bulk supply for high-volume salon networks and professional distributor channels. Professional K-beauty and professional hair care product distribution at 10-litre bulk scale is a target application for this machine's maximum-capacity output.

10-litre industrial cleaning compound canisters, institutional disinfectant containers, large cleaning product supply packaging, and specialty chemical bulk containers in PET. The 182 mm neck and 195 mm body serve the canister formats used in industrial facility maintenance, institutional building cleaning, and specialist chemical supply — where the PET stretch blow canister provides superior clarity and material efficiency versus HDPE injection alternatives at 10-litre scale.

Bulk cosmetic ingredient supply in PETG transparent 5-litre to 10-litre containers for cosmetic formulation and compounding facilities — where visual ingredient inspection and the structural advantage of stretch blow orientation versus injection moulding at 10-litre scale are both required. The 2-cavity output of the FS-2CG220 serves bulk ingredient supply volumes that single-cavity machines cannot efficiently meet at production cost targets.

Blowing pressure: 15–25 kg/cm² · Min. flow: 1,500–2,500 L/min (2-cavity ultra-large volume) · Oil-free type required

Cooling water: 8–12 °C · Min. flow: 40 L/min · Stable temperature critical for 2-cavity consistency at ultra-large jar scale

Operating pressure: 7 kg/cm² · Flow: 500 L/min · For preform conveying, cooling air supply, and mold actuation on 2-cavity ultra-large mold sets

✅

🔧

🏠

👥

"We supply 10-litre body care tubs to hotel groups across Asia — institutional body lotion and scrub in PET at 182 mm neck for bulk dispensing system integration. The FS-2CG220 was the only machine in the FS range that covered our container dimensions and gave us the output rate for our institutional supply volumes. 2-cavity running at this scale has been consistent across both cavities. The commissioning team was thorough — spent three days on site for the initial setup."

Machine: HGA.FS-2CG220

"We manufacture bulk salon conditioning treatment containers — 10-litre PET with 182 mm neck for professional distributor supply. The wide neck accommodates the direct pump fitting our distributor network uses for bulk dispensing. The 2-cavity output rate gives us the production volume we need for our distribution accounts. Preform design consultation before tooling order was essential — the preform wall specification for this geometry is not intuitive."

Machine: HGA.FS-2CG220

"We produce 10-litre industrial cleaning compound canisters in PET for institutional facility supply. The FS-2CG220 handles the format. We initially underestimated the utility infrastructure required for 2-cavity ultra-large production — the compressor specification for 1,500 to 2,500 litres per minute at this pressure is substantial. Ever-Power's application team advised us on this before purchase, but we wish we had asked earlier in our planning. Machine quality and production consistency since commissioning have both been good."

Machine: HGA.FS series

"We supply bulk PETG ingredient containers — 5-litre and 10-litre transparent tubs for a cosmetic formulation group. Product visibility through the container wall and structural integrity at 10-litre scale were both specification requirements. The FS-2CG220 delivers both. The Ever-Power commissioning team's experience with this machine format was evident — the zone calibration for PETG at this preform size is genuinely complex and was handled correctly."

Machine: HGA.FS-2CG220

Q1: Why is the FS-2CG220 a 2-cavity machine when the other FS models are single-cavity?

At 10,000 ml maximum volume and institutional supply production requirements, single-cavity output of 300–500 pph (as on the FS-1CG196) is often insufficient for the volume targets of hotel, resort, and professional salon bulk supply operations. The 2-cavity FS-2CG220 at 600–900 pph doubles the available output at this format scale, serving institutional supply volumes that single-cavity alternatives cannot efficiently produce within a single production shift. Both cavities share the same preform holder and heating system, maintaining consistency across cavities within the production lot.

Q2: What container formats specifically require the 220 mm pitch?

Any jar with a body diameter between 170 mm and 195 mm, a neck diameter between 160 mm and 182 mm, a volume between 5,000 ml and 10,000 ml, or a container height between 200 mm and 220 mm. These exceed the capacity of the FS-1CG196 (170 mm body, 160 mm neck, 5,000 ml max, 200 mm height). Submit your container drawing with all dimensions to Ever-Power before ordering tooling at this format scale.

Q3: What is the utility specification I need to plan for?

High-pressure air compressor at 15–25 kg/cm² with 1,500–2,500 L/min sustained delivery — size the compressor for 2-cavity simultaneous blowing at the target container volume. Low-pressure blower at 7 kg/cm² and 500 L/min. Chiller at 8–12 °C and 40 L/min. Max heating power 35 KW. The compressor specification at 1,500–2,500 L/min is the most significant utility planning item — Ever-Power's application team can provide a detailed utility specification based on your target jar geometry and production rate before you finalise facility planning.

Q4: Why is preform design consultation essential at this format scale?

At 182 mm neck diameter and 195 mm body diameter — a neck-to-body ratio of 182:195, nearly 1:1 — the preform must start from an extremely large neck geometry and distribute material across a body that is only 13 mm wider at maximum. This is among the most demanding preform distribution geometries in blow molding production. Incorrect preform wall specification at this scale results in jar sidewall thinning that cannot be corrected through process parameter changes alone. Ever-Power provides preform design consultation as a standard inclusion with every FS-2CG220 purchase — this step is not optional at 182 mm neck diameter.

Q5: Can the machine produce PETG 10-litre transparent tubs?

Yes, with careful preform design and infrared zone calibration for the specific PETG grade. At 195 mm body diameter with ultra-wide-mouth jar geometry, the blow ratio is very low — which is actually beneficial for PETG clarity, as very low blow ratios require less precision in preform temperature management to achieve consistent optical clarity. The infrared zone calibration for ultra-large PETG preforms is handled as part of commissioning. Contact Ever-Power with your PETG datasheet and jar drawing — PETG feasibility assessment is included in the pre-purchase consultation.

Q6: What is the machine footprint and installation clearance required?

3,400 mm (L) x 1,600 mm (W) x 2,100 mm (H), 2,800 kg. This is the largest machine in the HGA.FS series — larger than the FS-1CG196 (3,000 x 1,400 x 2,000 mm, 2,200 kg) to accommodate 2 cavities at 220 mm pitch plus the larger mold station and actuation system. Allow additional clearance on both sides and the front for 2-cavity mold set change-over, which requires maximum lateral working space at this format scale. Floor load capacity should be confirmed before installation — 2,800 kg concentrated footprint.

Q7: What certifications does the machine carry?

CE marking and ISO 9001:2015 are standard on all HGA series machines. CE Declaration of Conformity available for review before order. Factory acceptance test report with both-cavity samples inspected against all dimensional specifications supplied at delivery. Additional documentation available on request for institutional, food-contact, pharmaceutical, or export compliance requirements.

Q8: What after-sales support is available for this specialised machine?

Remote technical support during business hours with engineers who commissioned the machine. 5-year spare parts availability commitment. Engineers dispatched for on-site service for faults not resolvable remotely — with priority scheduling for FS-2CG220 customers given the specialised nature of the format. Preform design follow-up consultation is available if production issues arise that trace back to preform wall specification. Ever-Power maintains continuity of commissioning engineer knowledge for this machine format through the post-commissioning production period.

Same FS wide-mouth jar series at 196 mm pitch, single-cavity, for jars up to 170 mm body, 160 mm neck, and 5,000 ml — the step below the 2CG220 in the FS series.

View HGA.FS-1CG196 →

Single-cavity wide-mouth jar configuration for large cosmetic tubs and bulk salon product jars up to 130 mm body, 118 mm neck, and 2,000 ml.

View HGA.FS-1CG150 →

Browse the complete Ever-Power HGA cosmetic and daily chemical blow molding series — HGA.AS and HGA.ES multi-cavity bottle machines and the full HGA.FS single- and 2-cavity wide-mouth jar range.

View Full Series →