HGA.ES-4C130

4-Cavity Enhanced Servo Stretch Blow Molding Machine  ·  PET / PETG  ·  3,200 bph  ·  Max 110 mm Body  ·  CE + ISO 9001:2015

The HGA.ES-4C130 is the 4-cavity enhanced servo machine at 130 mm pitch — delivering 3,200 bph for large-body cosmetic and daily chemical bottles up to 110 mm body diameter and 1,500 ml volume. It covers the body diameter range between the 114 mm pitch family's 95 mm ceiling and the 150 mm pitch family's 130 mm floor, serving the large-format cosmetic and daily chemical bottle market at the highest output tier for this pitch.

At 110 mm body diameter and 1,500 ml maximum volume, large-body preforms on the 4C130 are among the heaviest in the 4-cavity ES series. With four cavities producing simultaneously and heavier preforms per cavity, servo timing precision has the largest per-cavity impact on wall-thickness consistency in the ES 4-cavity range. The enhanced servo drive maintains inter-cavity timing uniformity across all four positions at 3,200 bph — the configuration specification that distinguishes the ES from standard-servo alternatives at this body scale.

The 110 mm maximum body diameter positions the 4C130 in the jumbo personal care and large daily chemical format range — the widest-body standard cosmetic bottle formats used in family-size shampoo, jumbo conditioner, large body wash, and value-size daily chemical packaging. At 110 mm body diameter, a standard-profile 750 ml bottle has a noticeably wide feel in hand; a 1,500 ml format at this diameter approaches the scale of institutional dispensing containers. The 4-cavity configuration delivers these formats at 3,200 bph — the highest output available at 130 mm pitch in the HGA.ES series.

The 98 mm maximum neck diameter is the widest in the HGA.ES 130 mm pitch 4-cavity class — covering the large pump-top dispensers, wide flip-top closures, and wide-opening formats used in jumbo personal care packaging where the closure is proportionally large relative to the bottle body. At 98 mm neck and 110 mm body, the container opening is 89% of the body diameter — a nearly wide-mouth format that serves both dispenser and partial wide-mouth applications across jumbo personal care and daily chemical formats.

At 3,200 bph across 4 cavities, the 4C130 delivers more than 75% higher output than the 2-cavity HGA.ES-2C130 (1,800 bph) at the same body diameter. For high-volume cosmetic filling operations and daily chemical production where large-body bottle throughput is the constraint, the 4-cavity 3,200 bph configuration provides the production capacity needed without the pitch increase required to move to larger body diameter machines.

The 92-position preform holder provides extended infrared dwell time for the heavier large-body preforms at 130 mm pitch. At 110 mm body diameter and 1,500 ml volume, each preform carries substantially more material than standard cosmetic bottle preforms — the 92-position holder ensures four simultaneous preform streams receive consistent through-wall temperature conditioning before the blow station, maintaining wall-thickness uniformity across all four cavities at production rate.

Commissioning the 4C130 covers 92-position holder indexing calibration at 130 mm pitch, infrared zone balancing for four simultaneous large-body preform streams, ES servo parameter setup for 4-cavity 130 mm pitch timing, and inter-cavity uniformity verification from all four positions at 3,200 bph rate. Ever-Power's commissioning engineers complete all steps before handover, with factory acceptance test samples from all four cavities provided before shipment.

Family-size and jumbo shampoo and conditioner in PET and PETG from 500 ml to 1,500 ml at 110 mm body diameter — the wide-body format range used in family-size retail and value-size channel packaging. The 98 mm neck covers the large pump-top dispensers standard on jumbo personal care formats. 4-cavity output at 3,200 bph serves high-volume filling lines and OEM suppliers where large-body output targets exceed 2-cavity capacity.

Large-format body wash and shower gel from 500 ml to 1,500 ml at 110 mm body diameter in PET and PETG. The wide 110 mm body and 98 mm neck serve the jumbo format body wash specifications used in warehouse club, value retail, and bulk channel distribution — where wide-body container presentation is a marketing element and large volume per purchase is the primary buyer motivation.

Large-format fabric softener, laundry detergent, and household cleaning product containers from 750 ml to 1,500 ml at 110 mm body diameter in PET. The wide-body format and 98 mm neck cover the large pump-top and pour-cap closures used in family-size daily chemical packaging. High-volume daily chemical production at 3,200 bph 4-cavity output serves the throughput requirements of large-format daily chemical filling operations.

OEM packaging suppliers producing large-body PET and PETG bottles for cosmetic and daily chemical brand clients at 110 mm body diameter — jumbo shampoo, conditioner, body wash, and daily chemical from 500 ml to 1,500 ml across concurrent brand SKUs. The 3,200 bph 4-cavity ES output at large-body scale provides the throughput and inter-cavity quality standard needed for high-volume OEM supply at this format tier.

Blowing pressure: 35 kg/cm² · Min. flow: 6,000 L/min · Oil-free type required — industrial compressor system recommended at this flow rate

Cooling water: 8–12 °C · Min. flow: 40 L/min · Stable temperature for consistent 4-cavity large-body quality at production rate

Operating pressure: 7 kg/cm² · Flow: 800 L/min · For preform conveying, cooling air, and mold actuation across 4 cavities at 130 mm pitch

✅

🔧

🏠

👥

"We produce jumbo shampoo and conditioner from 750 ml to 1,500 ml at 108 mm body diameter for family-size retail distribution. The HGA.ES-4C130 was the right selection — 4-cavity at 3,200 bph meets our weekly filling schedule targets. We previously ran a 2-cavity machine at the same pitch; the step to 4-cavity nearly doubled our output. Inter-cavity weight uniformity across all four positions has been consistently within specification since commissioning."

Machine: HGA.ES-4C130

"We run large-format body wash at 1,000 ml and 1,500 ml — 110 mm body, 95 mm flip-top neck — for warehouse club channel distribution. 3,200 bph 4-cavity meets our production volume. The 6,000 litre per minute air requirement needed a dedicated compressor — Ever-Power gave us a clear utility specification well before delivery and we planned accordingly. Machine has run reliably since startup."

Machine: HGA.ES-4C130

"We manufacture family-size fabric softener and laundry detergent at 1,000 ml and 1,500 ml in PET. 110 mm body, 98 mm wide pour-cap neck. The 4-cavity 130 mm pitch was the right selection. Production quality has been consistent across all four cavities. The 6,500 kg machine weight required floor reinforcement in our older facility — verify floor load capacity early in your planning process."

Machine: HGA.ES-4C130

"We produce PETG jumbo conditioner at 800 ml and 1,200 ml for a premium salon brand — wide body, wide neck, optical clarity required. PETG at 4-cavity rate at this body size requires patience with infrared zone setup. The commissioning engineer handled it thoroughly — two days on zone calibration specifically for our PETG grade at 130 mm pitch. Clarity across all four cavities has been acceptable since production stabilised."

Machine: HGA.ES-4C130

Q1: When should I choose the 4C130 over the 2C130 or a 114 mm pitch 4-cavity machine?

Choose the 4C130 when your bottle body diameter is between 95 mm and 110 mm and your output target requires 4-cavity throughput — the HGA.ES-2C130 covers the same format at 1,800 bph with simpler 2-cavity process setup. The 4C114 and 4C114.3 have a 94–95 mm maximum body diameter and cannot serve bottles at 110 mm body. If your bottle body diameter is at or below 95 mm, a 114 mm pitch 4-cavity machine is the correct selection — submit your bottle specification to Ever-Power for a confirmed pitch recommendation.

Q2: What high-pressure air infrastructure is required?

6,000 L/min at 35 kg/cm². At this flow rate, a single standard industrial oil-free compressor is typically not sufficient — a dedicated high-capacity compressor or compressor system is required. An oil-free compressor system is mandatory for cosmetic and personal care bottle production. Obtain the full utility specification from Ever-Power before finalising facility planning — the compressor planning timeline is the longest lead item in production line preparation for this machine.

Q3: What floor load capacity is required for the 6,500 kg machine?

The machine weighs 6,500 kg on a 5,450 mm x 2,070 mm footprint — approximately 577 kg/m² distributed load. Many standard factory floors are rated at 500–800 kg/m²; confirm your floor load rating with a structural engineer before installation. Older facilities may require floor reinforcement. Ever-Power provides the full machine load specification document on request for structural assessment.

Q4: Can the machine process PETG at large-body format?

Yes, subject to infrared zone calibration for the specific PETG grade and preform specification at 110 mm body diameter. PETG requires a narrower processing temperature window than PET — at 4-cavity production with large-body preforms, zone-level calibration at this preform mass requires more commissioning time than standard body sizes. Ever-Power's commissioning engineers handle PETG zone calibration specifically for your resin grade during commissioning. Contact Ever-Power with your PETG datasheet before ordering for a pre-commissioning zone profile assessment.

Q5: What is the machine footprint?

5,450 mm (L) x 2,070 mm (W) x 2,320 mm (H), 6,500 kg. Allow lateral clearance on both sides for 4-cavity mold change-over at 130 mm pitch — large-body mold sets at 4-cavity require more lateral working space than standard-pitch tooling. Allow space for the bottle outlet conveyor and collection system sized for 3,200 bph large-body bottles, and for auxiliary equipment access on all sides.

Q6: What after-sales support is available?

Remote technical support during business hours. 5-year spare parts availability commitment. On-site engineer dispatch for faults not resolvable remotely. The 4-cavity large-body commissioning engineer is available for follow-on visits if inter-cavity uniformity issues arise during production ramp-up at 3,200 bph rate that cannot be resolved through remote parameter guidance.

Same pitch and body diameter range in 2-cavity ES configuration — 1,800 bph with simpler 2-cavity process setup for operations not requiring 4-cavity throughput at 130 mm pitch.

View HGA.ES-2C130 →

Same 4-cavity ES configuration at 150 mm pitch for bottles up to 130 mm body and 2,500 ml — the correct selection when body diameter exceeds the 4C130's 110 mm limit.

View HGA.ES-4C150 →

Browse the complete Ever-Power HGA cosmetic and daily chemical blow molding series across all cavity counts and pitch configurations.

View Full Series →