HGA.ES-4C114

4-Cavity Enhanced Servo Stretch Blow Molding Machine  ·  PET / PETG  ·  3,300 bph  ·  Max 94 mm Body  ·  CE + ISO 9001:2015

The HGA.ES-4C114 is the 4-cavity enhanced servo machine at 114 mm pitch — delivering 3,300 bph for medium-body cosmetic and daily chemical bottles up to 94 mm body diameter and 1,300 ml volume. It provides the highest throughput available in the HGA.ES 114 mm pitch family, serving high-volume shampoo, conditioner, and daily chemical bottle production lines that require more than 3-cavity output at this pitch and body diameter range.

At 94 mm body diameter and 1,300 ml maximum volume, medium-body preforms on the 4C114 are substantially heavier than slim-format preforms. In 4-cavity production with heavier preforms, the blow sequence timing, stretch rod advance precision, and take-out consistency all have amplified effects on inter-cavity wall-thickness distribution and bottle weight uniformity. The ES enhanced servo drive addresses all three simultaneously — maintaining consistent inter-cavity quality across all four positions throughout extended production runs at medium-body scale.

The 88 mm maximum neck diameter is the widest in the HGA.ES 4-cavity 114 mm pitch family — covering the large-opening pump-top dispensers, wide-mouth flip-top closures, and broad-shoulder bottle profiles used in premium medium-body personal care packaging. At 88 mm, the neck opening is nearly as wide as the maximum 94 mm body diameter — serving bottle formats where the neck-to-body ratio is a deliberate premium packaging design element.

The 100-position preform holder is the largest in the HGA.ES 4-cavity 114 mm pitch family — providing the extended infrared dwell time that four simultaneous medium-body preform streams require for consistent through-wall temperature conditioning at 3,300 bph. With 100 positions advancing four preforms per cycle at 114 mm pitch, each preform receives substantially more heating residence time than the 74-position holder on the 3-cavity 3C114 — supporting the higher-quality temperature uniformity standard that 4-cavity production at this body diameter requires.

At 3,300 bph, the HGA.ES-4C114 delivers 37.5% more throughput than the 3-cavity 3C114 (2,400 bph) and 65% more than the 2-cavity 2C114.3 (2,000 bph). For high-volume cosmetic filling operations and OEM suppliers where 3-cavity 114 mm pitch throughput is the production constraint, the 4-cavity configuration provides the capacity step-up needed without pitch change or body diameter compromise.

Like the 3C114, the HGA.ES-4C114 offers dual maximum container heights: 250 mm for standard-height medium-body bottles and 330 mm for tall bottle formats. The 400 mm stretching stroke is common to both configurations; the height limit difference reflects the mold design and tooling configuration. Confirm your required bottle height and the corresponding configuration with Ever-Power before ordering tooling to ensure mold and stroke compatibility.

Commissioning the 4C114 covers 100-position holder indexing calibration, infrared zone balancing for four simultaneous medium-body preform streams, ES servo parameter setup for 4-cavity blow station timing, height configuration setup for the selected 250 mm or 330 mm option, and inter-cavity uniformity verification from all four positions. Ever-Power's commissioning engineers complete all steps before handover, with first-production samples from all four cavities inspected before sign-off.

Premium and mass-market shampoo and conditioner from 300 ml to 1,300 ml at 94 mm body diameter and 88 mm pump-top or flip-top neck. High-volume cosmetic filling lines where 3-cavity 114 mm pitch output is insufficient for production schedule requirements — the 4-cavity configuration eliminates the throughput constraint while maintaining the same body diameter and neck range coverage.

Body wash, conditioning treatment, and professional salon product bottles from 400 ml to 1,300 ml in PET and PETG at 94 mm body diameter. The 88 mm neck covers the wide-opening dispensers and professional-grade flip-top closures used in salon-channel product packaging. The 330 mm height option serves tall slender bottle profiles within the 94 mm body diameter range.

Standard and large-format daily chemical bottles — liquid soap, fabric softener, and household cleaning products — from 500 ml to 1,300 ml at 94 mm body diameter in PET. High-volume daily chemical production lines where medium-body bottle throughput is the constraint — the 3,300 bph 4-cavity configuration serves these volumes without moving to a larger pitch configuration.

OEM packaging suppliers producing medium-body PET and PETG bottles across multiple cosmetic and daily chemical brand clients — shampoo, conditioner, body wash, and daily chemical from 300 ml to 1,300 ml at concurrent brand SKUs. The 3,300 bph 4-cavity output at ES quality standard provides the throughput and inter-cavity consistency that premium brand clients require at medium-body format scale.

Blowing pressure: 35 kg/cm² · Min. flow: 5,000 L/min · Oil-free type required for cosmetic and personal care bottle production

Cooling water: 8–12 °C · Min. flow: 40 L/min · Stable temperature for consistent 4-cavity medium-body quality at production rate

Operating pressure: 7 kg/cm² · Flow: 800 L/min · For preform conveying, cooling air, and mold actuation across 4 cavities at 114 mm pitch

✅

🔧

🏠

👥

"We upgraded from 3-cavity to the 4C114 when our shampoo and conditioner order volumes exceeded what 2,400 bph could handle. The step to 3,300 bph resolved the capacity constraint. Inter-cavity weight uniformity across all four positions has been consistently within our client's specification since commissioning. The 100-position holder is the right call at this body diameter — we had heating uniformity issues on a competitor machine with fewer positions and this machine eliminated that problem entirely."

Machine: HGA.ES-4C114

"We produce premium PETG body wash at 800 ml and 1,200 ml — 92 mm body, 85 mm flip-top neck, clarity required. Four-cavity PETG at this body size requires careful zone calibration; the Ever-Power commissioning engineer handled it correctly. All four cavities produce consistent optical clarity and the 88 mm neck capacity means we can cover all our client's closure specifications at this pitch without changing machines."

Machine: HGA.ES-4C114

"We manufacture fabric softener and liquid detergent from 800 ml to 1,200 ml at 90 mm body in PET. The 4-cavity 114 mm pitch configuration was the right selection for our volume. The 5,000 L/min air requirement needed compressor capacity planning — we added a second compressor unit before installation. The Ever-Power application team provided the full utility specification before purchase, which allowed us to plan in advance without delays."

Machine: HGA.ES-4C114

"We use the 330 mm height configuration for tall 1,000 ml salon conditioner bottles — the tall slender profile at 94 mm body is a brand-specific design. The dual-height configuration was the deciding factor in choosing this machine over the alternative. Confirm the height configuration and corresponding mold design with Ever-Power before tooling order — we had a brief delay because of a mold design question that should have been resolved during the pre-purchase consultation."

Machine: HGA.ES-4C114

Q1: When should I choose the 4C114 over the 3C114?

When your production volume target at 114 mm pitch exceeds 2,400 bph (3-cavity capacity). The HGA.ES-3C114 at 2,400 bph covers the same body diameter and volume range with simpler 3-cavity process setup. Choose the 4C114 when 3-cavity throughput is the production constraint for your filling line schedule, or when OEM client volumes require more per-shift bottle count than 3-cavity production can deliver efficiently.

Q2: Why does the 4C114 have a slightly lower max volume (1,300 ml) than the 3C114 (1,500 ml) at the same pitch?

The maximum volume difference reflects the 4C114's specific mechanical configuration — at 4-cavity layout with 114 mm pitch, the blow station geometry, mold closing distance, and stretching stroke are optimised for the 4-cavity configuration, which produces a 1,300 ml volume ceiling versus the 3C114's 1,500 ml. Both configurations cover the 250/330 mm height range. If your bottle requires more than 1,300 ml at 114 mm pitch, the 3-cavity 3C114 is the correct model for that specific format requirement.

Q3: What high-pressure air infrastructure is required?

5,000 L/min at 35 kg/cm². This is the highest high-pressure air requirement in the HGA.ES 114 mm pitch family and requires a dedicated industrial compressor or compressor system sized for this sustained output. An oil-free compressor is required for cosmetic and personal care bottle production. Obtain the full utility specification from Ever-Power before finalising facility planning — the compressor planning timeline is typically the longest lead item in production line preparation for this machine.

Q4: What floor load capacity is required for the 5,500 kg machine?

The machine weighs 5,500 kg on a 5,120 mm x 2,150 mm footprint — approximately 500 kg/m² distributed load. Many standard factory floors are rated for this load, but confirmation is required before installation. Ever-Power provides the machine load specification document on request — present it to your facility structural engineer before finalising the installation location.

Q5: Can the machine handle both PET and PETG production?

Yes. The 100-position holder and zone-level digital infrared system provide adequate heating precision for PETG at medium-body preform weights. PETG zone profiles are calibrated for your specific grade during commissioning. Contact Ever-Power with your PETG datasheet before ordering for a pre-commissioning zone profile recommendation.

Q6: What after-sales support is available?

Remote technical support during business hours. 5-year spare parts availability commitment. On-site engineer dispatch for faults not resolvable remotely. The 4-cavity ES commissioning engineer is available for follow-on visits if inter-cavity uniformity issues arise during production ramp-up that cannot be resolved through remote parameter guidance.

Same pitch in 3-cavity ES configuration — 2,400 bph with simpler 3-cavity process setup and slightly wider body diameter and volume coverage for operations not requiring maximum throughput.

View HGA.ES-3C114 →

Same body diameter at 114.3 mm pitch with 4,000 bph output — higher throughput than the 4C114 at slightly different pitch and volume ceiling. Review both specifications with Ever-Power to confirm which covers your specific bottle format.

View HGA.ES-4C114.3 →

Browse the complete Ever-Power HGA cosmetic and daily chemical blow molding series across all cavity counts and pitch configurations.

View Full Series →