HGA.ES-2C114.3 Medicine Bottle Blow Molding Machine – 2 Cavity | 1000ml | 2000 BPH

HGA.ES-2C114.3

Fully Automatic Two-Step PET Stretch Blow Molding Machine for Pharmaceutical Bottles

2 Cavities · 1,000 ml Max · 2,000 BPH · 94mm Max Body · Korea Ever-Power

Why Choose the HGA.ES-2C114.3?

✓  ES servo architecture on the 114.3 mm pitch — precise servo-driven stretch-rod control and repeatable positioning versus cam-driven AS series design, at the same 1,000 ml / 2,000 BPH specification.

✓  50 kW max heating power — higher heating ceiling than the AS-2C114.3 (45 kW) enables faster oven warmup and tighter preform temperature profiles for consistent pharmaceutical-grade wall thickness.

✓  94 mm body / 88 mm neck / 1,000 ml — widest container ceiling in the 2-cavity 114.3 mm pitch format; supports the full range of standard pharmaceutical bottle profiles including wide-mouth amber vials.

✓  Direct upgrade path from AS-2C114.3 — same pitch, same mold tooling format; existing tooling is compatible when upgrading from the AS series to ES series on this pitch.

① ES Servo Architecture on 114.3 mm Pitch

The ES series servo-driven blow station brings precise stretch-rod positioning and repeatable control to the established 114.3 mm pitch format — retaining full compatibility with existing mold tooling at this pitch while upgrading the drivetrain to servo actuation for better consistency across long production runs.

② 50 kW Heating Ceiling — Tighter Profiles

At 50 kW maximum heating versus 45 kW in the AS series, the ES-2C114.3 provides more thermal headroom for fast oven warmup cycles and narrower preform temperature windows — supporting tighter wall thickness distribution targets in pharmaceutical-grade bottle production at 2,000 BPH.

③ 94 mm Body / 88 mm Neck / 1,000 ml

The widest container ceiling in the 2-cavity 114.3 mm pitch format — supporting the full range of standard pharmaceutical bottle profiles including wide-mouth amber pharmacy vials, hospital supply bottles, and large-format liquid medicine containers up to 1,000 ml.

④ Efficient Normal Operating Power

Despite a higher 50 kW max heating ceiling, normal operating power is 16 kW — lower than the AS-2C114.3's 20 kW. The ES servo architecture's more efficient infrared zone control reduces steady-state heating consumption while maintaining tighter preform temperature profiles.

⑤ PET / PETG / PP Multi-Material Ready

Individually adjustable infrared heating zones support PET, PETG, and PP resins at the 114.3 mm pitch. The ES servo actuation provides faster parameter transitions between material grades and bottle formats — reducing changeover time in multi-SKU pharmaceutical production schedules.

⑥ Low Air Consumption at 2,000 BPH

High-pressure air consumption of 1,000 L/min at 35 kg/cm² is the lowest of any 2-cavity ES series medicine bottle machine — lower than the AS-2C114.3's 1,600 L/min. This reduces the load on the oil-free air compressor and lowers per-unit utility cost at 2,000 BPH output.

Korea Ever-Power is a dedicated PET/PP blow molding machine manufacturer with over 20 years of focused R&D. Operating from a 20,000 m² production facility, Korea Ever-Power holds multiple national patents covering PET/PETG/PC/PCTG/PP multi-material packaging machinery and has earned international quality certifications including ECM Verification of Compliance.

Export destinations include Malaysia, Indonesia, Peru, Chile, Russia, Angola, Philippines, Norway, Morocco, Qatar, and more.

✅

🔧

🏠

💊

35 kg/cm² · 1,000 L/min · Lower than AS-2C114.3 requirement · Oil-free mandatory for pharmaceutical production

8–12 °C · 30 L/min · Standard 2-cavity 114.3 mm pitch mold cooling specification

7 kg/cm² · 600 L/min · Preform conveying and mold actuation at 114.3 mm pitch

What is the difference between the HGA.ES-2C114.3 and the HGA.AS-2C114.3?

Both machines share the 114.3 mm pitch, 2-cavity, 1,000 ml, 2,000 BPH specification and the same mold tooling format. The ES-2C114.3 upgrades the drivetrain to servo-driven blow station actuation (versus cam-driven in the AS series), providing more precise stretch-rod control, repeatable positioning, and faster changeover between blowing parameters. The ES also has a higher 50 kW heating ceiling (versus 45 kW) and lower 16 kW normal operating power (versus 20 kW). Machine footprint is slightly larger (3,220 mm versus 2,660 mm length) and heavier (3,000 kg versus 2,600 kg).

Can I use my existing AS-2C114.3 mold tooling on this machine?

Yes — the HGA.ES-2C114.3 and HGA.AS-2C114.3 share the same 114.3 mm cavity pitch and 2-cavity blow station format. Existing blowing molds at this pitch are compatible with the ES machine. Confirm mold mounting and clamp plate compatibility with Korea Ever-Power during the upgrade or new-purchase specification process.

Why is the normal heating power lower in the ES than in the AS at the same output?

The ES series servo architecture enables more precise infrared zone control — matching lamp output to the preform's thermal requirements more accurately than earlier-generation designs. This reduces steady-state energy waste from over-heating while maintaining tighter preform temperature profiles. The 50 kW ceiling provides headroom for fast warmup cycles; the 16 kW normal reflects efficient zone-matched operation at steady-state 2,000 BPH production.

What compressed air is required?

The HGA.ES-2C114.3 requires 1,000 L/min at 35 kg/cm² high-pressure blowing air — 38% lower than the 1,600 L/min of the AS-2C114.3 at the same BPH output. An oil-free air compressor is mandatory for pharmaceutical-grade production. Low-pressure supply of 600 L/min at 7 kg/cm² for preform conveying and mold actuation.

What is the production output and what affects real-world BPH?

Theoretical output is 2,000 BPH with 2 cavities. Real-world output is influenced by container size and complexity, material grade (PETG requires longer conditioning than PET), ambient conditions, and preform quality. Under well-controlled conditions with standard pharmaceutical bottle sizes, customers typically achieve 85–95% of theoretical output in sustained production runs.

Does Korea Ever-Power supply molds for this machine?

Yes. Korea Ever-Power supplies 2-cavity blowing molds at 114.3 mm pitch for the HGA.ES-2C114.3. Preform injection molds are also available. Submit your bottle specification — body diameter, neck finish, height, volume, wall thickness targets — for feasibility review and quotation.

What after-sales support is provided?

Korea Ever-Power provides on-site installation and commissioning, operator training, a one-year mechanical warranty, remote technical support via video call, and long-term spare parts availability across all export markets including Malaysia, Indonesia, Peru, Chile, Russia, Philippines, Norway, Morocco, and Qatar.

When should I choose the ES-2C114.3 over the ES-2C130 for larger bottles?

Choose the ES-2C114.3 when your container is within 94 mm body / 88 mm neck / 1,000 ml — the 114.3 mm pitch provides the blow station clearance for this range at 2,000 BPH. Choose the ES-2C130 when your container requires 110 mm body diameter, 98 mm neck, or up to 1,500 ml volume, where the wider 130 mm pitch and the associated machine scale is required.

"We upgraded from the AS-2C114.3 to this machine using our existing mold tooling. The changeover to ES servo was smooth — same pitch, same molds. The improvement in wall thickness consistency across the production run was immediately measurable. Our quality rejection rate dropped by around 30% in the first month."

HGA.ES-2C114.3

"The 1,000 L/min air requirement at 35 kg/cm² was a relief versus what I expected for a 1,000 ml machine. We were able to use our existing compressor with a modest upgrade. The 16 kW normal heating is also very efficient — our energy cost per thousand bottles is lower than our old machine at the same output."

HGA.ES-2C114.3

"We run five different amber PETG pharmacy bottle SKUs between 100ml and 800ml on this machine with mold changeover between batches. The ES servo makes parameter transitions between SKUs faster and the servo positioning means the first bottles after a changeover are already in spec — no extended warmup waste."

HGA.ES-2C114.3

"Good machine overall. Note that the footprint is larger than the AS-2C114.3 (3,220 mm versus 2,660 mm length) — this matters if your floor layout is tight. I'd recommend confirming your floor plan with Korea Ever-Power before order. The performance upgrade over the AS series is real and measurable."

HGA.ES-2C114.3

"We specified this machine new rather than upgrading from the AS series. The ES servo architecture was the deciding factor — we produce 500ml and 1,000ml amber hospital dispensing bottles where wall thickness tolerance is part of our QC submission. The machine passes our pharmaceutical client's incoming quality audit consistently."

HGA.ES-2C114.3

Get a Quote for the HGA.ES-2C114.3

Tell us your bottle specification and required daily output — or let us know you are upgrading from an AS-2C114.3 and we will confirm mold tooling compatibility and provide a quotation within 2 business days.