HGA.ES-2C130 Medicine Bottle Blow Molding Machine – 2 Cavity | 1500ml | 1800 BPH

HGA.ES-2C130

Fully Automatic Two-Step PET Stretch Blow Molding Machine for Large Pharmaceutical Bottles

2 Cavities · 1,500 ml Max · 1,800 BPH · 110mm Max Body · Korea Ever-Power

Why Choose the HGA.ES-2C130?

✓  110 mm body / 98 mm neck / 1,500 ml — the largest container ceiling of any 2-cavity medicine bottle machine in the Korea Ever-Power range; required when body diameter or volume exceeds the 114.3 mm pitch ceiling.

✓  130 mm pitch provides clearance for 110 mm body — the wider cavity pitch is the enabling factor for this container format; no narrower-pitch machine in the series can blow a 110 mm body diameter container.

✓  ES servo blow station — precise stretch-rod control and repeatable positioning for consistent wall thickness across the wider 110 mm body format, where material distribution challenges are greater than at narrower body diameters.

✓  Adjustable blowing pressure 26–35 kg/cm² — tunable pressure range supports PET, PETG, and PP resins at different wall thickness targets for the 1,500 ml container format.

① Widest Body in 2-Cavity Medicine Bottle Range

At 110 mm body diameter, the HGA.ES-2C130 produces the widest-body container of any 2-cavity machine in the Korea Ever-Power Medicine Bottle Series. The 130 mm pitch provides 20 mm more clearance than the 114.3 mm pitch — the enabling factor for this container diameter.

② 1,500 ml — Largest Volume in 2-Cavity Range

The 1,500 ml volume ceiling is the largest of any 2-cavity medicine bottle machine in the series — 500 ml more than the 114.3 mm pitch ceiling. This covers large-format hospital formulary dispensing, bulk liquid medicine supply, and institutional pharmaceutical containers not achievable on narrower-pitch 2-cavity machines.

③ ES Servo for Wide-Body Wall Distribution

Consistent wall thickness across a 110 mm body is more demanding than at narrower diameters — material distribution must travel further from the preform neck to fill the wider blow cavity. The ES servo's precise stretch-rod speed and position control directly improves wall thickness uniformity at this body size.

④ Adjustable Blowing Pressure 26–35 kg/cm²

The tunable blowing pressure range covers the full span from PP (lower pressure) to standard PET and PETG at different wall thickness targets. For the large 1,500 ml container format, optimised blowing pressure directly affects material distribution evenness and top-load strength — making the pressure adjustment range especially valuable.

⑤ Low Normal Heating for Its Scale

8–13 kW normal operating heating for a 2-cavity, 1,500 ml machine is the lowest of the ES series medicine bottle range relative to container volume. Precise ES series zone control ensures preforms at the 130 mm pitch reach optimal forming temperature without over-heating, minimising energy per bottle at this format.

⑥ 1,000–1,500 L/min Air — Efficient for 1,500 ml

High-pressure air at 1,000–1,500 L/min for a 2-cavity, 1,500 ml machine is well-optimised for the format scale. The adjustable range reflects the wider blowing pressure window (26–35 kg/cm²) — lower pressure tuning for PP reduces air consumption; higher pressure for PET/PETG increases it. Supply from an oil-free compressor is mandatory for pharmaceutical-grade production.

Korea Ever-Power is a dedicated PET/PP blow molding machine manufacturer with over 20 years of focused R&D. Operating from a 20,000 m² production facility, Korea Ever-Power holds multiple national patents covering PET/PETG/PC/PCTG/PP multi-material packaging machinery and has earned international quality certifications including ECM Verification of Compliance.

Export destinations include Malaysia, Indonesia, Peru, Chile, Russia, Angola, Philippines, Norway, Morocco, Qatar, and more.

✅

🔧

🏠

💊

26–35 kg/cm² · 1,000–1,500 L/min · Oil-free mandatory for pharmaceutical-grade production at 1,500 ml format

8–10 °C · 30 L/min · Standard cooling for 2-cavity 130 mm pitch mold at 1,500 ml container scale

7 kg/cm² · 600 L/min · Preform conveying and mold actuation at 130 mm pitch

Why choose the HGA.ES-2C130 over the HGA.ES-2C114.3 for large bottles?

The ES-2C114.3 supports up to 94 mm body / 88 mm neck / 1,000 ml. Choose the ES-2C130 when your container requires a body diameter between 95–110 mm, a neck diameter between 89–98 mm, or a volume between 1,001–1,500 ml. These specifications exceed the 114.3 mm pitch ceiling and require the 130 mm pitch of the ES-2C130 for adequate blow station clearance.

How does the 130 mm pitch enable a wider body diameter?

Cavity pitch is the centre-to-centre distance between adjacent cavities at the blow station. The body of the blown container must fit within roughly half the pitch on each side without interfering with the adjacent mold. At 130 mm pitch, the maximum practical body diameter is approximately 110 mm; at 114.3 mm pitch it is approximately 94 mm. A container requiring 110 mm body cannot be blown at 114.3 mm pitch regardless of output configuration.

What is the annual production volume at 1,800 BPH?

At 1,800 BPH theoretical output and sustained two-shift operation at 85–92% efficiency, the machine produces approximately 7–8 million bottles per year. This suits pharmaceutical manufacturers supplying hospital networks, regional pharmacy distribution, and institutional bulk medicine customers at large-format container scale.

What blowing pressure should I use for PP versus PET at the 1,500 ml format?

PP typically blows at 26–28 kg/cm² at the 1,500 ml container scale; standard PET operates between 30–35 kg/cm²; PETG falls within 28–33 kg/cm² depending on grade and wall thickness target. Korea Ever-Power engineers confirm optimal pressure settings during factory acceptance testing on your specific preform and mold tooling before shipment.

What compressed air system is required?

The HGA.ES-2C130 requires 1,000–1,500 L/min at 26–35 kg/cm² high-pressure blowing air. An oil-free air compressor is mandatory for pharmaceutical-grade production. The low end of 1,000 L/min applies at 26 kg/cm² PP blowing; the upper end of 1,500 L/min applies at 35 kg/cm² PET/PETG blowing. Confirm with Korea Ever-Power based on your material and wall thickness specification.

Does Korea Ever-Power supply molds for 130 mm pitch at 1,500 ml scale?

Yes. Korea Ever-Power designs and manufactures 2-cavity blowing molds at 130 mm pitch for the HGA.ES-2C130, including preform injection molds for the corresponding preform format. Submit your container drawing — body diameter, neck finish, height, volume, wall thickness targets — for feasibility and pricing review.

What after-sales support is provided?

Korea Ever-Power provides on-site installation and commissioning, operator training, a one-year mechanical warranty, remote technical support, and long-term spare parts availability across Malaysia, Indonesia, Peru, Chile, Russia, Philippines, Norway, Morocco, Qatar, and other export markets.

When should I consider a 3-cavity or 4-cavity machine instead?

Choose the HGA.ES-2C130 when your container requires 110 mm body / 1,500 ml at 1,800 BPH output. Consider the HGA.ES-3C76 (3 cavities, 3,000 BPH) when your container fits the 76 mm pitch (≤68 mm body) and you need higher throughput. For the 110 mm body format at higher output, contact Korea Ever-Power — the appropriate multi-cavity configuration at this pitch requires custom specification.

"We supply 1,000 ml and 1,500 ml liquid medicine bottles to a hospital procurement network. The ES-2C130 was the only machine that could produce our 108 mm body diameter specification — every narrower-pitch machine we evaluated was 10–15 mm short. Wall thickness consistency at this body width is excellent and the ES servo was clearly the right choice for our QC requirements."

HGA.ES-2C130

"We run amber PETG bottles at 1,200 ml for a pharmaceutical export account requiring wide-body format for product display reasons. 1,800 BPH at 2 cavities exactly matches our shift production schedule without overproducing. The adjustable pressure range let us dial in the right PETG settings during commissioning without swapping hardware."

HGA.ES-2C130

"The compressor requirement of 1,500 L/min at 35 kg/cm² for PET is manageable — we use an oil-free screw compressor as Korea Ever-Power recommended and it handles the ES-2C130 comfortably. The machine runs cleanly across our 1,000 ml and 1,500 ml bottle formats with one mold changeover between batch sizes each shift."

HGA.ES-2C130

"Good overall. Note the machine length of 3,600 mm — with inlet and outlet conveyors our total line footprint is around 7 metres, which we had to accommodate by reorganising the floor layout. Performance at the 110 mm body is solid and the Korea Ever-Power commissioning team knew exactly how to tune the ES servo for our wall thickness targets."

HGA.ES-2C130

"We produce PP bulk medicine containers at 1,500 ml for institutional pharmacy supply. The 26 kg/cm² low-end blowing pressure for PP worked well — lower air consumption and the wide-body PP bottles pass our top-load tests consistently. Factory acceptance testing on our PP molds confirmed wall distribution before we accepted the machine."

HGA.ES-2C130

Get a Quote for the HGA.ES-2C130

Tell us your bottle body diameter, neck finish, height, volume, material, and required output per shift. Our engineers confirm 130 mm pitch compatibility and provide a machine and mold quotation within 2 business days.