HGA.ES-6C76 Medicine Bottle Blow Molding Machine – 6 Cavity | 700ml | 7200 BPH

HGA.ES-6C76

Fully Automatic Six-Cavity Two-Step PET Stretch Blow Molding Machine for Pharmaceutical Bottles

6 Cavities · 700 ml Max · 7,200 BPH · 76 mm Pitch · Korea Ever-Power

Why Choose the HGA.ES-6C76?

✓  7,200 BPH — maximum output in the series — the highest throughput available for compact pharmaceutical vial formats at 76 mm pitch; 50% more than the 4-cavity ES-4C76.

✓  130-position preform holder — largest in the Medicine Bottle Series, providing the longest infrared conditioning dwell time per preform at 7,200 BPH for consistent wall temperature across all 6 cavities.

✓  ES servo precision across 6 cavities — servo-driven stretch-rod control with repeatable per-cavity positioning at maximum 6-cavity output speed, delivering pharmaceutical-grade wall thickness uniformity.

✓  700 ml ceiling at 6-cavity throughput — covers the full range of standard pharmaceutical vial sizes from small eye drop bottles through to larger amber pharmacy dispensing bottles at maximum output.

① 7,200 BPH — Series Maximum Output

The HGA.ES-6C76 is the highest-output machine in the entire Korea Ever-Power Medicine Bottle Series at 7,200 BPH — 50% above the 4-cavity ES-4C76, 140% above the 3-cavity ES-3C76. For pharmaceutical operations where maximum compact-vial throughput on a single machine platform is the production objective, the ES-6C76 is the definitive choice.

② 130-Position Preform Holder — Series Largest

The 130-position preform holder is the largest in the Medicine Bottle Series — 36% more positions than the 96-position holders in the 4-cavity machines. The extended oven tunnel provides longer infrared conditioning dwell time per preform at 7,200 BPH, ensuring every preform across all 6 cavities reaches consistent wall temperature before blowing.

③ ES Servo Across 6 Simultaneous Cavities

Maintaining consistent stretch-rod speed and position across 6 simultaneous cavities at 7,200 BPH is the most demanding blow molding control task in the series. The ES servo architecture provides the per-cavity precision required — delivering pharmaceutical-grade wall thickness uniformity across all six blow positions across sustained high-speed production runs.

④ 62.5 kW Heating — Full 6-Cavity Thermal Support

The 62.5 kW maximum heating ceiling provides the thermal headroom required for fast oven warmup cycles at 6-cavity scale and narrow preform temperature windows across the 130-position holder. Normal operating power of 26 kW reflects the ES series' efficient zone-matched infrared control — the 6-cavity machine operates at proportionate energy consumption relative to its output rate.

⑤ Consolidate Multiple 2- or 3-Cavity Lines

A single HGA.ES-6C76 at 7,200 BPH replaces three 2-cavity machines (3 × 2,400 BPH) or two 3-cavity machines (2 × 3,000 BPH) on the same pitch. Floor footprint consolidation, reduced auxiliary equipment connections, and single-machine maintenance represent the operational efficiency gains of moving to the 6-cavity platform.

⑥ PET / PETG / PP · 5,800 L/min High-Pressure Air

Multi-material compatibility at 6-cavity scale with 5,800 L/min high-pressure air — the highest in the series. An oil-free air compressor sized for this throughput is mandatory for pharmaceutical-grade production. Compressor specification must be confirmed with Korea Ever-Power before installation planning.

Korea Ever-Power is a dedicated PET/PP blow molding machine manufacturer with over 20 years of focused R&D. Operating from a 20,000 m² production facility, Korea Ever-Power holds multiple national patents covering PET/PETG/PC/PCTG/PP multi-material packaging machinery and has earned international quality certifications including ECM Verification of Compliance.

Export destinations include Malaysia, Indonesia, Peru, Chile, Russia, Angola, Philippines, Norway, Morocco, Qatar, and more.

✅

🔧

🏠

💊

35 kg/cm² · 5,800 L/min · Highest demand in the series · Dedicated high-capacity oil-free system required · Confirm specification with Korea Ever-Power before ordering

8–12 °C · 40 L/min · Higher flow rate than 4-cavity models to support 6-cavity mold cooling across all blow positions

7 kg/cm² · 900 L/min · 6-cavity preform conveying and mold actuation at 76 mm pitch

How much more output does the ES-6C76 deliver compared to other models in the series?

The ES-6C76 at 7,200 BPH delivers 50% more output than the ES-4C76 (4,800 BPH), 140% more than the ES-3C76 (3,000 BPH), and 200% more than the 2-cavity ES-2C100 (2,400 BPH). It is the only machine in the Korea Ever-Power Medicine Bottle Series capable of exceeding 5,000 BPH at the 76 mm pitch.

Why does the ES-6C76 have a 38 mm max neck diameter versus 48 mm on the ES-4C76?

At 76 mm pitch with 6 cavities, the blow station geometry reduces available clearance per cavity versus the 4-cavity configuration. The 38 mm max neck diameter reflects this constraint — the 6-cavity machine targets small-to-medium pharmaceutical vial neck finishes rather than the wider-neck formats accessible on the 4-cavity machine. Containers requiring neck diameters between 39–48 mm at 76 mm pitch should use the ES-4C76 or ES-3C76.

What annual production volume does 7,200 BPH support?

At 7,200 BPH theoretical output and sustained two-shift operation at 85–92% efficiency, the machine produces approximately 18–22 million units per year. This level serves national-scale pharmaceutical manufacturers, large-volume hospital supply producers, and contract packagers operating at the highest pharmaceutical vial volume tiers.

What compressed air system is required?

The HGA.ES-6C76 requires 5,800 L/min at 35 kg/cm² — the highest high-pressure air demand in the Medicine Bottle Series. An oil-free air compressor is mandatory for pharmaceutical-grade production. This volume typically requires a dedicated high-capacity oil-free screw compressor or a multi-unit compressor system. Confirm specification with Korea Ever-Power before installation planning — undersized compressors are the most common commissioning issue on 6-cavity machines.

How does the 130-position preform holder compare to smaller models in the series?

The 130-position preform holder is the largest in the Medicine Bottle Series — 36% more positions than the 96-position holders on the 4-cavity machines and 81% more than the 72-position holder on the ES-3C76. The larger holder provides longer infrared conditioning dwell time per preform at 7,200 BPH, which is critical for consistent wall temperature distribution across all 6 cavities at maximum output speed.

Does Korea Ever-Power supply 6-cavity molds at 76 mm pitch?

Yes. Korea Ever-Power designs and manufactures 6-cavity blowing molds at 76 mm pitch matched to the HGA.ES-6C76, including preform injection molds. Submit your vial specification — body diameter, neck finish and diameter, height, volume, wall thickness targets — for mold feasibility review and pricing.

What floor space and utility planning is required?

The machine footprint is 4,690 × 2,000 mm at 5,500 kg. With inlet/outlet conveyors and auxiliary equipment (compressor, chiller, low-pressure system), total line length typically reaches 12–15 metres. Floor load of approximately 587 kg/m² should be confirmed against your facility structural specification. Request a full layout drawing from Korea Ever-Power before installation planning.

What after-sales support is provided?

Korea Ever-Power provides on-site installation and commissioning, operator training, a one-year mechanical warranty, remote technical support via video call, and long-term spare parts availability across Malaysia, Indonesia, Peru, Chile, Russia, Philippines, Norway, Morocco, Qatar, and other export markets.

"We were running three ES-2C100 machines at 76mm pitch. The ES-6C76 replaced all three in one floor position and produces 7,200 BPH versus the 7,200 BPH combined of three 2,400 BPH machines — but now from a single machine with one compressor, one chiller, and one maintenance relationship. The operational simplification has been as valuable as the throughput itself."

HGA.ES-6C76

"We supply amber PETG pharmacy vials nationally. The ES-6C76 at 7,200 BPH allows us to run our full annual contract volume in a single shift with one machine, freeing the second shift for maintenance and changeover. The 130-position preform holder delivers very consistent wall temperature across all 6 cavities — our QC rejection rate at 7,200 BPH is lower than it was on our two 3,600 BPH machines."

HGA.ES-6C76

"The 5,800 L/min compressor requirement was the most significant planning item. Korea Ever-Power provided a full utility specification and layout drawing six weeks before delivery, which gave us time to install the dedicated compressor system. Commissioning was completed in 4 days and we reached 6,900 BPH sustained in the first week of production."

HGA.ES-6C76

"Excellent throughput. Planning note for anyone considering this machine: the 4,690mm length plus conveyors and compressor means your total line will be 13–15 metres long. We had to redesign our production floor layout before installation. Get the full layout drawing from Korea Ever-Power as early as possible in the project timeline — don't leave it until after order."

HGA.ES-6C76

"We produce eye drop vials and 500ml amber pharmacy bottles on the same machine with mold changeover. At 7,200 BPH on eye drop vials we fill our hospital supply contract in one shift. Factory acceptance testing ran both mold formats across all 6 cavities simultaneously. Wall thickness uniformity on the 6-cavity platform is genuinely impressive at this output rate."

HGA.ES-6C76

Get a Quote for the HGA.ES-6C76

Tell us your vial neck finish, body diameter, volume, and required daily output. Our engineers confirm 6-cavity 76 mm pitch compatibility, provide compressor and utility specifications, and deliver a machine and mold quotation within 2 business days.