HGA.AS-2C114.3 Medicine Bottle Blow Molding Machine – 2 Cavity | 1000ml | 2000 BPH

HGA.AS-2C114.3

Fully Automatic Two-Step PET Stretch Blow Molding Machine for Pharmaceutical Bottles

2 Cavities · 1,000 ml Max · 2,000 BPH · 7mm Min Neck · Korea Ever-Power

Why Choose the HGA.AS-2C114.3?

✓  Pioneering small-neck technology — the first automatic bottle blowing machine capable of producing 7mm neck-finish pharmaceutical vials at commercial speed.

✓  International-grade components — servo motors, reducers, and control systems sourced from globally recognized brands for maximum uptime.

✓  Multi-material compatibility — processes PET, PETG, and PP preforms on the same platform without heater tooling changes.

✓  Lower operating cost — precision blowing circuit reduces compressed-air waste versus older-generation designs.

① Pioneer 7mm Neck-Finish Capability

The first fully automatic blow molding machine designed for 7mm small-tooth-mouth preforms — a critical requirement for eye drop bottles and hospital-grade dropper vials that other machines could not achieve at full automation speed.

② International-Brand Drive Components

Servo motors, precision reducers, and brand-name electrical components and control systems are integrated throughout, making the machine stable, energy-efficient, and easy to maintain in any global production environment.

③ Two-Step Process = Superior Wall Uniformity

Allowing preform crystallinity to stabilize before blowing results in more uniform wall thickness, higher clarity, and better top-load strength — essential for pharmaceutical packaging standards and regulatory inspection.

④ PET / PETG / PP Multi-Material Ready

Individually adjustable infrared heating zones enable processing of PET, PETG, or PP resins on the same platform. Choose material by chemical resistance or clarity requirement without purchasing additional machines.

⑤ Compact Footprint — Easy Cleanroom Fit

At 2,660 × 1,660 × 2,150 mm and 2,600 kg, this is the most compact model in the Medicine Bottle Series, suitable for smaller cleanroom or workshop footprints. Full-perimeter access panels allow rapid mold changes and servicing.

⑥ Low Air Consumption Design

An optimized air-recovery circuit limits high-pressure consumption to 1,600 L/min — significantly lower than older machines of similar output, reducing the load on the oil-free air compressor supplying the blowing line.

Korea Ever-Power is a dedicated PET/PP blow molding machine manufacturer with over 20 years of focused R&D. Operating from a 20,000 m² production facility, Korea Ever-Power holds multiple national patents covering PET/PETG/PC/PCTG/PP multi-material packaging machinery and has earned international quality certifications including ECM Verification of Compliance.

Korea Ever-Power machines serve globally recognized brands across cosmetics, food & beverage, pharmaceutical, and daily-chemical sectors. Export destinations include Malaysia, Indonesia, Peru, Chile, Russia, Angola, Philippines, Norway, Morocco, Qatar, and more.

✅

💊

🔧

🏠

35 kg/cm² · 1,600 L/min · Mandatory for pharmaceutical-grade production to prevent bottle contamination

8–12 °C · 30 L/min · Mold cooling for consistent wall thickness across all production runs

7 kg/cm² · 600 L/min · Preform conveying and mold actuation at 114.3 mm pitch

What is the difference between a two-step and a one-step blow molding machine?

A two-step (reheat stretch) machine uses pre-made preforms that are reheated in an infrared oven and stretch-blown into bottles. A one-step ISBM machine performs injection, conditioning, and blowing in a single continuous sequence. Two-step suits high-volume commodity bottles; one-step suits small-volume specialty bottles requiring GMP no-hand-contact production from pellet to finished bottle.

What makes the HGA.AS-2C114.3 specifically suitable for pharmaceutical bottles?

The HGA.AS-2C114.3 is the first automatic blowing machine capable of producing 7mm small-tooth-mouth bottles — the minimum neck dimension required for eye drop dropper vials and certain hospital-grade dispensing containers. Its PET/PETG/PP compatibility supports amber tinted pharmaceutical bottles, and the two-step process gives the wall uniformity and optical clarity that regulatory inspectors require.

What type of air compressor is needed to run this machine?

The machine requires a high-pressure air source for blowing (35 kg/cm², 1,600 L/min) and a low-pressure circuit for control operations (600 L/min). For pharmaceutical bottle production, an oil-free air compressor is mandatory to prevent oil contamination inside the bottle. A chiller maintaining cooling water at 8–12°C at 30 L/min flow is also required.

Can this machine produce bottles smaller than 1,000 ml?

Yes — 1,000 ml is the maximum. The machine produces much smaller volumes: 5 ml eye drop vials, 10 ml dropper bottles, 30 ml medicine bottles, 50 ml nasal spray containers, 100–500 ml pharmaceutical bottles — using the appropriate preform and blowing mold. Mold changeover is straightforward and the machine supports multiple mold configurations.

What affects real-world production speed versus the 2,000 BPH theoretical output?

Real-world output is influenced by bottle size and shape complexity, material type (PETG requires longer conditioning than PET), ambient conditions, preform quality consistency, and operator experience. Under well-controlled conditions, customers typically achieve 85–95% of theoretical output in sustained production runs.

Does Korea Ever-Power supply preform molds and blowing molds?

Yes. Korea Ever-Power provides a complete supply chain including preform injection molds and blowing molds designed to match the machine and your exact bottle specification. Preform molds use imported 2316 die steel with hot treatment; blowing molds use high-quality steel with 3D CAD design. Interchangeable die fittings allow one mold to produce more than one preform type.

What after-sales support is included?

Korea Ever-Power provides on-site installation and commissioning, operator training, a one-year warranty on mechanical components, remote technical support via video call, and long-term spare parts availability. Regional service partners support customers in Malaysia, Indonesia, Peru, Chile, Russia, Philippines, Norway, Morocco, Qatar, and other export markets.

How does the HGA.AS-2C114.3 compare to higher-cavity models in the Medicine Bottle Series?

The HGA.AS-2C114.3 is the entry model with 2 cavities and 2,000 BPH — ideal for buyers entering pharmaceutical bottle production, running multiple SKUs in smaller batches, or space-constrained facilities. Higher-cavity models (e.g. HGA.AS-4C76.2 at 4 cavities / 4,000 BPH; HGA.ES-6C76 at 6 cavities / 7,200 BPH) offer greater throughput at the cost of larger footprint and higher capital investment.

"We produce 5ml and 10ml eye drop bottles for a regional pharmaceutical distributor. The 7mm neck-finish capability is exactly what we needed — no other supplier could deliver at this automation level. The machine has run continuously for 10 months with zero unplanned downtime."

HGA.AS-2C114.3

"We run this machine alongside an oil-free compressor as recommended. The commissioning team was professional and the startup training was thorough. Wall uniformity on our 30ml amber pharmacy bottles is noticeably better than our previous machine. Strong recommendation for medium-volume pharma lines."

HGA.AS-2C114.3

"We produce clear PET shampoo and lotion bottles for hotel groups across North Africa. The compact size fits our production floor perfectly. Output consistency is reliable and the support team responded quickly when we adjusted parameters for a new bottle shape. Would definitely buy from Korea Ever-Power again."

HGA.AS-2C114.3

"We run multiple SKUs — 50ml nasal spray, 100ml liquid medicine, and 250ml antiseptic bottles — simply by changing molds. Changeover takes about 2 hours once the team is trained. Energy consumption is lower than expected. Tip: confirm chiller spec carefully with Korea Ever-Power before installation."

HGA.AS-2C114.3

"We have placed two HGA.AS-2C114.3 units with pharmaceutical clients in Russia. Both run at near-theoretical output. The machines are well-built, documentation is thorough, and Korea Ever-Power's export packaging arrived damage-free. Considering higher-cavity models for our next client order."

HGA.AS-2C114.3

Get a Quote for the HGA.AS-2C114.3

Tell us your bottle type, target volume, and production rate — our engineers will recommend the right machine and mold configuration for your line.