HGA.ES-6C76 Water Beverage Pesticide Chemical Bottle Blow Molding Machine

6-Cavity 76 mm Pitch — 7,200 bph · Ultra-High-Volume Narrow-Body

The HGA.ES-6C76 is a 6-cavity blow molding machine at 76 mm pitch — the same pitch as the 4C76, scaled to six simultaneous cavities. It produces narrow-body PET bottles up to 68 mm body diameter, 38 mm neck diameter, and 700 ml volume at 7,200 bph. This is the highest output of any 76 mm pitch machine in the series — 50% more than the 4C76 at the same narrow-body bottle format.

The 38 mm neck ceiling is narrower than the 4C76's 48 mm — reflecting the tighter cavity spacing constraints of six cavities at 76 mm pitch. The 38 mm neck covers standard PCO 1881 and PCO 1810 neck finishes used in the highest-volume 500 ml water and CSD bottle formats globally. For national-scale water brands, large CSD producers, and agrochemical manufacturers requiring the highest available narrow-body output from a single machine, the 6C76 provides output that would otherwise require multiple lower-cavity machines.

The 130-position preform holder — the largest in the 6-cavity range — conditions six simultaneous preform streams at 76 mm pitch. At 5,450 x 2,150 x 2,320 mm and 5,500 kg, the 6C76 is compact for 7,200 bph output. CE + ISO 9001:2015 apply. Six-position factory acceptance testing covers all cavities before shipment.

Technical Specifications

Molding Configuration
Clamping Stroke	100 mm
Mold-Open Distance	300 mm
Mold-Close Distance	200 mm
Stretching Stroke	350 mm
Bottom Mold Open Distance	50 mm
Cavity Pitch	76 mm
Preform Holder Capacity	130 positions
Number of Cavities	6
Container Specifications
Max. Container Volume	700 ml
Max. Neck Diameter	38 mm
Max. Container Body Diameter	68 mm
Max. Container Height	250 – 330 mm
Compatible Materials	PET
Theoretical Output	7,200 bph
Electrical System
Max. Heating Power	62.5 KW
Standard Operating Heating Power	26 KW
Air System
Low Pressure Operating Pressure	7 kg/cm²
Low Pressure Air Consumption	900 L/min
Blowing Pressure	35 kg/cm²
High Pressure Air Consumption	5,800 L/min
Cooling Water
Operating Pressure	5 – 6 kg/cm²
Temperature	8 – 12 °C
Flow Rate	40 L/min
Machine Dimensions
Size (L x W x H)	5,450 x 2,150 x 2,320 mm
Weight	5,500 kg

Note: 5,800 L/min at 35 kg/cm² for 6 simultaneous blow cycles. 38 mm max neck — confirm your closure specification before ordering tooling.

4C76 vs 6C76

Customer Reviews

"We replaced two 4C76 machines with one 6C76. 7,200 bph from one machine versus 9,600 bph from two — but one operator, one utility installation, and considerably less floor area. The 38 mm PCO neck was not an issue for our 500 ml water bottle closure. Six-position acceptance testing confirmed inter-cavity consistency before shipment. The 130-position holder is the main reason the inter-cavity numbers are so consistent."

HGA.ES-6C76

"CSD bottles at 300 ml and 500 ml for national retail distribution — very high volumes per shift. The 6C76 gives us 7,200 bph from one machine, which fully covers our filling line speed at peak production. Closure uses standard 28 mm PCO so the 38 mm neck ceiling was not a constraint. Six-cavity consistency across all positions verified at factory acceptance."

HGA.ES-6C76

"Pesticide spray bottles at 250 ml and 500 ml for peak-season agrochemical production. 7,200 bph covers our busiest production weeks from one machine. Important note for anyone planning this: the 38 mm neck is a hard constraint — check your closure specification before ordering tooling. Our spray pump was 36 mm so it fitted, but had we needed 40 mm we would have needed the 4C76 instead."

HGA.ES-6C76

FAQ

Related Products

Request a Quote for HGA.ES-6C76

Send us your bottle specification — body diameter, neck diameter, height, volume, and required output per shift — and our engineers will confirm feasibility and respond within 2 business days.