HGA.ES-2C100 Water Beverage Pesticide Chemical Bottle Blow Molding Machine

HGA.ES-2C100

2 Cavities · 100 mm Pitch · PET Bottle

Product Overview

One Machine, Two Bottle Categories

The 80 mm body diameter and 68 mm neck cover the primary narrow-body formats in both food beverage and agrochemical/chemical packaging — eliminating the need for separate platforms for the two product categories.

At 2,400 bph from a 2-cavity 100 mm pitch machine, the HGA.ES-2C100 delivers a production rate suited to mid-scale beverage bottlers and agrochemical fillers without the capital investment of larger multi-cavity configurations. The compact footprint at 2,900 mm length is the smallest in the series.

The 80 mm body / 68 mm neck covers both 500 ml beverage and standard agrochemical bottle formats, enabling production of both categories from one machine with tooling changeover. For operations producing water or juice alongside pesticide or lubricant bottles, the HGA.ES-2C100 reduces the total number of machines required.

At 2,900 x 1,525 x 1,930 mm and 2,000 kg, the HGA.ES-2C100 is the most compact machine in the series. It fits production layouts where larger machines would require bay reconfiguration, and its 2,000 kg weight is within the floor load capacity of most standard factory floors without reinforcement.

CE certification and ISO 9001:2015 quality management apply across the full HGA Water, Beverage, Pesticide & Chemical series. Factory acceptance testing on buyer tooling before shipment covers wall thickness, neck thread accuracy, container height, and optical clarity. View the full range at the Water & Beverage series.

★★★★★

Production Manager, Beverage & Agrochem Packer — Vietnam

Verified · Running since Q2 2023

★★★★★

Factory Director, Regional Water Brand — Indonesia

Verified · Running since Q4 2022

★★★★☆

Technical Director, Industrial Chemical Packaging — Thailand

Verified · Running since Q1 2023

Can this machine produce both beverage bottles and chemical bottles without hardware modification?

Yes — the machine platform is common to both categories. Switching between beverage and chemical bottle production requires a blow mold tooling changeover and a preform change. No structural or mechanical modification to the machine is required. Confirm that your chemical bottle preform specification is compatible with the HGA.ES-2C100's 68 mm neck ceiling with Ever-Power before ordering tooling.

What is the next model up from the HGA.ES-2C100 in this series?

The next model is the HGA.AS-2C114.3 — a 2-cavity machine at 114.3 mm pitch with a larger 1,000 ml maximum volume and 94 mm body diameter at 2,000 bph. Choose the 2C114.3 when your bottle requires a larger body or higher volume than the 2C100's 80 mm / 500 ml ceiling.

Is an oil-free compressor required for beverage bottle production?

Yes — oil-free compressed air is mandatory for food and beverage bottle production to prevent contamination. The HGA.ES-2C100 requires 600 L/min at 7 kg/cm² low pressure and 1,000–1,400 L/min at 26–35 kg/cm² high pressure. For chemical bottles where food-contact standards do not apply, confirm compressor type with your regulatory requirements before specifying.

What are the floor load requirements?

2,000 kg on a 2,900 x 1,525 mm footprint — approximately 452 kg/m². Standard factory floors rated at 500 kg/m² typically accommodate this without reinforcement. Confirm with a structural engineer before installation.

How does the HGA.ES-2C100 compare to the 4-cavity models in the series?

The 2-cavity 2C100 at 2,400 bph is the entry-level configuration. The 4-cavity models at the same 100 mm pitch (HGA.ES-4C100) produce 4,600 bph from the same body and neck envelope at higher capital cost, larger footprint, and higher utility requirements. Choose the 2C100 for entry-level output targets; choose the 4-cavity models when shift output requirements exceed 2,400 bph at this bottle format.

Get Started

📧 Contact Us
Full Series