HGA.ES-2C130 Edible Oil Handle Bottle Blow Molding Machine

edible-oil-handle-bottle-series-blow-molding-machine

HGA.ES-2C130 — 2-cavity blow molding machine for edible oil, condiment and handle PET bottles up to 1,500 ml. 1,800 bph, 110 mm max body, 98 mm max neck. 3,600 x 1,800 x 1,980 mm, 3,000 kg. CE + ISO 9001:2015.

SKU: f5752f49378b Category:
Inquire Now

HGA.ES-2C130 edible oil handle bottle blow molding machine

Edible Oil & Handle Bottle Series

HGA.ES-2C130

2 Cavities · 130 mm Pitch · Edible Oil & Handle PET

1,800
bph
1,500 ml
Max Volume
110 mm
Max Body

🥘

Edible Oil
Cooking oil · Salad oil

🥽

Handle Bottle
Front & rear handle

🌶

Condiment
Sauce · Vinegar · Soy

Product Overview

2-Cavity 130 mm Pitch — Edible Oil and Handle Bottle Platform up to 1,500 ml

The HGA.ES-2C130 is the entry-level 2-cavity machine in the Edible Oil and Handle Bottle series — producing PET bottles up to 110 mm body diameter, 98 mm neck diameter, and 1,500 ml volume at 1,800 bph. The 130 mm cavity pitch is the standard spacing for edible oil bottle production at this body diameter — accommodating the wide label panels and grip geometry that oil bottle brands specify for retail shelf presentation.

This machine is developed specifically for the edible oil and condiment market. It produces front-handle and rear-handle bottle formats, standard cooking oil bottles from 500 ml to 1,500 ml, and condiment containers including soy sauce, vinegar, and cooking sauce. For larger handle bottle formats above 1,500 ml, see the edible oil and handle bottle series. The centralized heating and distance blow design — a characteristic of the Ever-Power edible oil series — reduces heating energy consumption and improves preform conditioning uniformity for the thick-wall preforms typical of oil bottle production.

At 3,600 x 1,800 x 1,980 mm and 3,000 kg, site preparation is required before installation. CE + ISO 9001:2015 apply.

HGA.ES-2C130 edible oil handle bottle machine

1,800 bph
Output
1,500 ml
Max Volume

Edible oil handle bottle PET range produced on HGA.ES-2C130

Technical Specifications

HGA.ES-2C130 — Full Parameter Table

Molding Configuration
Clamping Stroke 160 mm
Mold-Open Distance 360 mm
Mold-Close Distance 200 mm
Stretching Stroke 350 mm
Bottom Mold Open Distance 50 mm
Cavity Pitch 130 mm
Preform Holder Capacity 60 positions
Number of Cavities 2
Container Specifications
Max. Container Volume 1,500 ml
Max. Neck Diameter 98 mm
Max. Container Body Diameter 110 mm
Max. Container Height 250 mm
Compatible Materials PET
Theoretical Output 1,800 bph
Electrical System
Max. Heating Power 42.5 KW
Standard Operating Heating Power 8 – 13 KW
Air System
Low Pressure Operating Pressure 7 kg/cm²
Low Pressure Air Consumption 600 L/min
Blowing Pressure 26 – 35 kg/cm²
High Pressure Air Consumption 1,000 – 1,500 L/min
Cooling Water
Operating Pressure 5 – 6 kg/cm²
Temperature 8 – 10 °C
Flow Rate 30 L/min
Machine Dimensions
Size (L x W x H) 3,600 x 1,800 x 1,980 mm
Weight 3,000 kg

Source: Ever-Power Edible Oil and Handle Bottle Series specification sheet. Verify container geometry with Ever-Power before tooling order.

Applications

Edible Oil, Handle Bottles and Condiment Containers

The 130 mm pitch 2-cavity platform covers the full range of standard edible oil formats from 500 ml to 1,500 ml — front-handle, rear-handle, and standard bottle configurations.

🥘
Standard Cooking Oil — 500 ml to 1,500 ml

Standard PET cooking oil bottles for retail shelf: palm oil, sunflower oil, soybean oil, and blended cooking oil in the dominant 500 ml, 1,000 ml, and 1,500 ml retail formats. 110 mm body provides the label width standard in consumer cooking oil packaging.

🥽
Front-Handle Oil Bottle

750 ml to 1,500 ml PET bottles with integrated front-handle grip for easy pouring. The 130 mm pitch and 360 mm mold-open distance accommodate handle tooling geometry. Front-handle design is preferred in premium retail cooking oil packaging.

🟆
Rear-Handle Oil Bottle

1,000 ml and 1,500 ml rear-handle cooking oil PET bottles for family-size retail. The rear-handle format is the dominant packaging design for premium cooking oil brands in Korea and SEA markets.

🌶
Soy Sauce and Vinegar

500 ml to 1,500 ml PET condiment bottles for soy sauce, vinegar, oyster sauce, and cooking wine. PET clarity and chemical resistance match glass presentation standards at lower cost and weight for retail condiment packaging.

🍽
Salad Oil and Specialty Oil

500 ml to 1,500 ml PET bottles for olive oil, sesame oil, flaxseed oil, and other specialty cooking oils. PET provides the clarity and UV barrier properties appropriate for specialty oil retail presentation.

🍳
Cooking Sauce and Marinade

500 ml to 1,500 ml PET bottles for cooking sauces, marinades, hot sauce, and condiment blends. The 98 mm neck ceiling covers wide-mouth dispensing closures and standard spout caps used in sauce packaging.

Series Design

Why the Edible Oil Series Differs from Standard Bottle Machines

🔥
Centralized Heating Design

The oil series uses a centralized heating zone configuration that groups the infrared lamps around a central preform path — improving heat distribution uniformity across the thick-wall preforms required for oil bottles. Standard thin-wall beverage preform heating geometry does not achieve consistent wall thickness in the heavier preform stock needed for oil bottle rigidity.

📈
Distance Blow for Large Molds

The distance blow configuration separates the blow station from the preform conditioning section by a greater distance than standard machines — allowing handle-integrated molds with wider protrusions to operate without interference. This is the design requirement that enables front-handle and rear-handle oil bottle tooling on this platform.

🥧
Handle Tooling Compatibility

Both front-handle and rear-handle oil bottle mold sets are compatible with the 130 mm pitch blow station. Handle geometry is blown integrally with the bottle body — no secondary handle attachment step is required. Submit your handle design drawing to Ever-Power for tooling feasibility assessment before ordering.

⚡
Energy Efficiency at Oil Bottle Cycle Rate

Standard operating heating power is 8–13 KW despite a 42.5 KW maximum installed capacity — the centralized heating design reduces steady-state energy consumption by concentrating heat input more efficiently than distributed lamp arrays. This translates to lower energy cost per bottle at the 1,800 bph cycle rate for oil bottle preforms.

Ever-Power production workshop — edible oil handle bottle blow molding machine manufacturing

Series Position

HGA.ES-2C130 in the Edible Oil Series

Model Cavities Output Max Body Max Neck Max Vol.
HGA.ES-2C130 ★ 2 1,800 bph 110 mm 98 mm 1,500 ml
HGA.ES-2C150 2 1,800 bph 130 mm 110 mm 2,500 ml
HGA.ES-2C200 2 1,600 bph 180 mm 138 mm 5,000 ml
HGA.FS-2C200(5L) 2 8,200 bph 180 mm 50 mm 5,000 ml
HGA.JS-2CB152 2 1,600 bph 140 mm 46 mm 3,000 ml
HGA.JS-2C200 2 1,000 bph 180 mm 58 mm 5,000 ml
HGA.J-2C366(20L) 2 700 bph 300 mm 90 mm 22,000 ml

The 2C130 is the entry configuration in the series — standard-format cooking oil and condiment bottles up to 1,500 ml. For larger volume or wider body formats, see the 2C150 and 2C200 above.

Customer Reviews

What Customers Say

Customer production site running HGA.ES-2C130 for edible oil bottle production
★★★★★

"Our primary product is 1-litre cooking oil with a rear-handle design for retail. The 2C130 at 1,800 bph matches our filling line exactly. The handle tooling was confirmed by Ever-Power before ordering and fit perfectly — no blow-station interference. The centralized heating gives us much more consistent wall thickness in the handle area than the previous machine we used. We run the same machine for soy sauce bottles with a tooling changeover."

Production Director, Edible Oil Brand — Indonesia
Verified · Running since Q1 2022

HGA.ES-2C130

★★★★★

"We produce 500 ml, 750 ml, and 1,500 ml cooking oil bottles on this machine — three different formats from a single platform. The changeover between format tooling sets takes under two hours. The 130 mm pitch covers all three body sizes within our brand specification. Energy consumption at 8–10 KW standard operation is noticeably lower than the competitor machine it replaced."

Operations Manager, Cooking Oil Brand — Vietnam
Verified · Running since Q2 2022

HGA.ES-2C130

★★★★☆

"Condiment producer running soy sauce and cooking vinegar in 500 ml and 1,000 ml PET. The 98 mm neck handles our spout closure and flip-top cap system. We chose this machine specifically because it comes from a manufacturer with an edible oil series — not a modified standard bottle machine. The build quality for the thick-wall preform stock we use is noticeably more robust. Site requirement: confirm your compressor is sized for 1,500 L/min HP air from the start."

Factory Manager, Condiment Packaging — Thailand
Verified · Running since Q3 2022

HGA.ES-2C130

FAQ

Frequently Asked Questions

Why is an edible oil-specific machine needed rather than a standard beverage bottle machine?

Edible oil bottles use significantly thicker preform stock than standard beverage bottles — because oil bottles require higher rigidity and impact resistance for retail handling and pour-ability. This thicker preform requires a different heating geometry (centralized, longer dwell) to achieve uniform temperature across the wall cross-section. Standard beverage machines optimized for thin-wall PET preforms do not achieve consistent conditioning for oil bottle preform specifications, resulting in wall thickness defects and increased rejection rate. The HGA.ES-2C150 applies the same centralized heating design at wider pitch for larger preform stock.

Can both front-handle and rear-handle oil bottle tooling be used on the same machine?

Yes — the HGA.ES-2C130 accommodates both front-handle and rear-handle mold configurations within the 130 mm pitch blow station. Switching between handle configurations requires a full blow mold set change. Submit both handle drawings to Ever-Power before ordering to confirm tooling feasibility for both formats on a single machine. The distance blow design provides the mold protrusion clearance that handle tooling requires.

Can this machine produce condiment bottles (soy sauce, vinegar) alongside oil bottles?

Yes — switching between cooking oil and condiment production requires a blow mold changeover and preform change only. Both product categories use PET and are compatible with the same machine platform. For producers running both oil and condiment formats, the 130 mm pitch covers the standard body diameters of both categories without requiring a wider-pitch machine. Confirm closure compatibility for your condiment dispensing system with Ever-Power before tooling order.

When should I consider the HGA.ES-2C150 instead of this model?

Choose the HGA.ES-2C150 when your oil bottle requires a body diameter above 110 mm or a volume above 1,500 ml. The 2C150 produces up to 130 mm body, 110 mm neck, and 2,500 ml at the same 1,800 bph output. If your core retail format is 1 litre or 1.5 litre standard cooking oil at 110 mm body, the 2C130 is the correct and more cost-effective configuration. The 2C150 adds width and volume capability at higher machine cost and utility consumption.

Related Products

Other Models in the Series

HGA.ES-2C150 edible oil handle bottle machine

Wider Body — Step Up
HGA.ES-2C150 · 1,800 bph · 130 mm body

2-cavity at 150 mm pitch — 130 mm body, 110 mm neck, 2,500 ml max. The correct step-up for larger oil formats.

View Details →

HGA.ES-2C200 5-litre oil bottle machine

Large Format — 5-Litre
HGA.ES-2C200 · 1,600 bph · 180 mm body

2-cavity at 200 mm pitch — 180 mm body, 138 mm neck, 5,000 ml max for large-format cooking oil containers.

View Details →

Get Started

Request a Quote for HGA.ES-2C130

Send us your bottle specification — body diameter, neck diameter, height, volume, handle type (front / rear / none), and required output per shift — and our engineers will confirm tooling feasibility and respond within 2 business days.

Additional information

Editor

Related products