HGA.ES-2C114.3

2-Cavity Enhanced Servo Stretch Blow Molding Machine  ·  PET / PETG  ·  2,000 bph  ·  Max 94 mm Body  ·  CE + ISO 9001:2015

The HGA.ES-2C114.3 is the enhanced-servo version of the 114.3 mm pitch wide-body cosmetic machine. The ES configuration delivers higher cycle speed, tighter dimensional repeatability, and faster servo response across all drive axes compared to the standard HGA.AS-2C114.3 — recommended where bottle-to-bottle dimensional consistency and processing precision for special-shaped or premium cosmetic containers are primary quality requirements.

The ES enhanced servo configuration delivers improved drive response across all axes at the 114.3 mm wide pitch — injection, stretching, blow, and take-out. At the larger preform weights and longer blow strokes required by wide-body cosmetic containers up to 94 mm diameter and 1,000 ml volume, faster servo response translates to more consistent stretch-rod timing relative to blow pressure onset. This is the parameter that most directly affects wall-thickness distribution in shoulder and base sections of wide-body premium cosmetic bottles.

The 114.3 mm pitch is the widest cavity spacing in the HGA series — designed for the largest cosmetic and daily chemical bottle formats. Maximum body diameter of 94 mm covers premium lotion pump bottles, wide-body shampoo dispensers, salon-grade conditioner bottles, large cream jars, and 750 ml to 1,000 ml daily chemical containers. The 88 mm maximum neck diameter accommodates wide-mouth, pump-top, press-top, and flip-top closure formats across the premium personal care and household categories.

A digitally controlled infrared heating system with zone-level power control manages preform temperature across all 60 holder positions. For wide-body PETG cosmetic bottles — where the larger container diameter means a longer blow ratio and a greater sensitivity to preform temperature variation across bottle height — precise zone control of the preform temperature profile is the primary lever for achieving consistent optical clarity across production runs. The ES-series infrared system provides this precision at the 114.3 mm pitch wide-body scale.

Wide-body asymmetric, faceted, waisted, and multi-panel cosmetic bottles from 200 ml to 1,000 ml — the premium cosmetic packaging category that requires both large body diameter and high surface-quality standards. The enhanced servo configuration benefits wide-body special-shaped bottles specifically because the longer blow stroke and larger blow ratio involved in producing wide-body profiles amplify any timing variation in the stretch-blow sequence into proportionally larger wall-thickness errors. Faster ES servo response reduces this source of variation.

Cosmetic manufacturers supplying premium brands in Korea, Japan, and Europe operate against documented supply-chain quality specifications — including neck-finish tolerance, wall-thickness uniformity, and bottle height consistency measured across full production lots. The HGA.ES-2C114.3's enhanced servo repeatability supports these quality audit requirements at 2,000 bph sustained production rates on wide-body cosmetic container formats that are the primary category in export cosmetic packaging.

Internationally sourced servo motors, premium electrical components, and control systems follow standard industrial specifications for local-market spare part sourcing. The ES servo components used across the drive system are from brands with wide regional distributor coverage — reducing spare part lead times for unplanned maintenance events. Factory-trained engineers handle installation, mold mounting, and process setup including infrared zone calibration for the customer's resin grade.

Large-format lotion pump bottles, cream jars, and premium skincare dispensers from 200 ml to 1,000 ml in PET and PETG. The 94 mm maximum body diameter and 88 mm neck diameter cover the wide-body formats used in premium skincare packaging — salon brands, department store cosmetics, and export beauty brands where container quality standards include documented dimensional tolerances.

Salon-grade shampoo bottles, professional conditioner dispensers, and wide-format body wash packaging from 300 ml to 1,000 ml. The 114.3 mm pitch accommodates the wider body diameters used in salon-grade personal care packaging where bottle presence is a brand statement — formats that require both wide body diameter and precise neck-finish geometry for pump-top closure compatibility.

Fabric softener bottles, dish soap dispensers, multi-surface cleaner containers, and laundry detergent packaging from 400 ml to 1,000 ml. Wide neck diameter supports the pump-top and press-top closures standard in daily chemical dispensing. The stretch blow process delivers the oriented molecular structure that provides bottle wall integrity under pump actuation pressure across the product life.

Asymmetric, waisted, multi-panel, and geometrically distinctive wide-body cosmetic packaging from 200 ml to 800 ml. The enhanced servo timing precision of the HGA.ES configuration is specifically advantageous here — wider blow ratios in large-diameter special-shaped bottles amplify any servo timing variation, and the ES faster response reduces this source of wall-thickness error in premium export K-beauty cosmetic bottle production.

Blowing pressure: 35 kg/cm² · Min. flow: 1,000–1,500 L/min · Oil-free type recommended for cosmetic and personal care packaging

Cooling water: 8–12 °C · Min. flow: 30 L/min · Precise temperature control critical for PETG clarity in wide-body bottles

Operating pressure: 7 kg/cm² · Flow: 600 L/min · For preform conveying, cooling air supply, and mold actuation circuits

"We export PETG wide-body cosmetic bottles to Korean and Japanese brands — 300 ml and 500 ml lotion pump formats. Dimensional tolerances on neck finish are documented in our supply agreements. The HGA.ES machine has held those tolerances consistently across both cavities at production rate for over nine months of two-shift operation. The ES servo configuration was the specific reason we chose it over the standard AS version."

Machine: HGA.ES-2C114.3

"We produce wide-body shampoo and conditioner bottles for salon brands — 750 ml and 1,000 ml in PET. The 114.3 mm pitch and 94 mm body diameter were exactly what our bottle drawing required. The enhanced servo configuration handled the long blow stroke on the 1,000 ml format cleanly without the timing adjustment issues we had on our previous machine."

Machine: HGA.ES-2C114.3

"We produce wide-body PETG cream jars and premium lotion dispensers — 200 ml and 400 ml formats with asymmetric waist profiles. The stretch blow process with the ES servo handles the wide-body special shape reliably. Setup time on new asymmetric molds takes some patience with the infrared zone profile, but the support team was responsive during commissioning and the quality result is consistent."

Machine: HGA.ES series

"We supply daily chemical packaging — 500 ml and 800 ml dishwashing liquid and fabric softener bottles. Wide neck and body diameter were the requirements. The machine output is consistent at close to 2,000 bph. After-sales technical support has been responsive. We have been running since August 2024 without production-stopping faults."

Machine: HGA.ES-2C114.3

Q1: What is the key difference between HGA.ES-2C114.3 and HGA.AS-2C114.3?

Both machines share the same 114.3 mm pitch, 94 mm max body diameter, 88 mm max neck, 1,000 ml max volume, and 2,000 bph output. The difference is in the servo drive configuration: the ES uses an enhanced servo motor system with higher response speed across all drive axes, delivering tighter dimensional repeatability, faster cycle recovery, and more consistent stretch-blow timing on wide-body and special-shaped containers. Choose the ES when bottle-to-bottle dimensional consistency is a documented buyer quality requirement; choose the AS model for standard cosmetic and daily chemical production against internal quality targets.

Q2: Why is enhanced servo particularly beneficial for wide-body and special-shaped cosmetic bottles?

Wide-body bottles up to 94 mm diameter and 1,000 ml volume require longer blow strokes and larger blow ratios than small-format cosmetic containers. At larger blow ratios, any variation in the timing of stretch rod advance relative to blow pressure onset is amplified into proportionally larger wall-thickness errors in the bottle shoulder and base. The ES enhanced servo's faster response across stretch and blow axes reduces this timing variation — directly improving wall-thickness consistency in wide-body profiles. For special-shaped asymmetric wide-body bottles, this effect is even more pronounced.

Q3: Can this machine handle PETG for premium cosmetic bottle clarity?

Yes. The zone-level digital infrared heating system manages the narrower PETG thermal processing window precisely across all 60 preform holder positions. For wide-body PETG bottles — where the larger blow ratio increases sensitivity to preform temperature variation — the enhanced servo timing consistency of the ES configuration also contributes to more uniform optical clarity across production runs. Contact Ever-Power with your PETG grade for a preform temperature zone profile before ordering tooling.

Q4: What bottle formats does the 114.3 mm pitch cover that narrower-pitch machines cannot?

The 114.3 mm pitch and 94 mm max body diameter cover wide-body lotion pump bottles, large cream jars, salon shampoo and conditioner dispensers, wide-mouth cosmetic containers, and daily chemical bottles up to 1,000 ml — all of which exceed the 80 mm body diameter of the 100 mm pitch HGA.ES-2C100 and the 65 mm body diameter of the HGA.AS-4C76.2.

Q5: What compressed air specification is required?

Low pressure: 7 kg/cm² at 600 L/min for preform conveying and mold actuation. High pressure: 35 kg/cm² at 1,000–1,500 L/min for the blow cycle. An oil-free air compressor is recommended for cosmetic and personal care packaging. Specifications are similar to the HGA.AS-2C114.3 — both are 2-cavity 114.3 mm pitch machines with comparable blow cycle volume per rotation.

Q6: What is the machine footprint and weight?

3,220 mm (L) x 1,660 mm (W) x 2,010 mm (H), 3,000 kg. Larger than the HGA.AS-2C114.3 (2,660 x 1,660 x 2,150 mm, 2,600 kg) due to the enhanced servo drive integration. Allow clearance on all four sides for operator access, mold change-over, and maintenance.

Q7: What certifications does the machine carry?

CE marking and ISO 9001:2015 are standard on all HGA series machines. CE Declaration of Conformity available for review before order. Factory acceptance test report on buyer-specified preform and container format is supplied at delivery. Additional regulatory documentation available on request for pharmaceutical packaging or export-market quality audit requirements.

Q8: What after-sales and spare parts support is available?

Remote technical support during business hours. Spare parts stocked with a 5-year minimum availability commitment. The ES servo components — sourced from brands with wide regional distributor coverage — are available locally in most markets for same-day or next-day supply. Engineers dispatched for on-site service for faults not resolvable remotely.

Same 114.3 mm pitch, 94 mm body diameter, 88 mm neck, and 1,000 ml volume range. Standard servo configuration for cosmetic and daily chemical production against internal quality targets. Lower capital cost than the ES version.

View HGA.AS-2C114.3 →

Same ES enhanced servo configuration at 100 mm pitch and 80 mm max body diameter — for mid-size cosmetic and personal care bottles between the narrow and wide-body ranges.

View HGA.ES-2C100 →

Browse the complete Ever-Power HGA cosmetic and daily chemical blow molding machine series — AS and ES configurations, all cavity pitch options, and the full output capacity range.

View Full Series →