HGA.ES-2C130 Cosmetic & Daily Chemical Bottle Blow Molding Machine

HGA.ES-2C130

2-Cavity Enhanced Servo Blow Molding Machine  ·  PET / PETG  ·  1,800 bph  ·  Max 110 mm Body  ·  CE + ISO 9001:2015

The HGA.ES-2C130 carries the widest cavity pitch in the HGA.ES 2-cavity range — 130 mm — enabling production of the largest cosmetic and daily chemical container formats up to 110 mm body diameter and 1,500 ml. The enhanced servo drive delivers the dimensional repeatability and precise stretch-blow timing that large-format PET and PETG containers require at sustained production rates.

Large-format containers at 110 mm body diameter and up to 1,500 ml volume involve the longest blow strokes and highest blow ratios in the HGA.ES 2-cavity series. At these blow ratios, any timing variation in the stretch-blow sequence is amplified into proportionally larger wall-thickness errors in the bottle shoulder and base. The ES enhanced servo's faster response across stretch and blow axes reduces this variation precisely where it matters most — in large-format containers where wall-thickness uniformity is hardest to achieve and most visible in the finished bottle.

The 130 mm cavity pitch and 110 mm maximum body diameter serve the jumbo cosmetic and large daily chemical container formats that the 114.3 mm pitch HGA.ES-2C114.3 cannot produce. This includes large body butter containers, jumbo cream jars, bulk conditioner dispensers, 1,000 ml to 1,500 ml daily chemical containers, and professional-grade salon packaging — all formats where the combination of large body diameter, large neck opening, and container volume exceed the 114.3 mm machine's capacity envelope.

The 98 mm maximum neck diameter is the widest in the HGA.ES 2-cavity range aside from the 150 mm pitch model — enabling production of wide-mouth cosmetic jars, jumbo flip-top containers, large press-top daily chemical dispensers, and refill bottle formats where the closure opening is itself a product feature. Wide-mouth jars in PET and PETG are a growing premium cosmetic category in body care, hair care, and premium household cleaning products.

A digitally controlled infrared heating system with zone-level power control manages preform temperature across all 60 holder positions. For large-format PETG containers at 110 mm body diameter — where the high blow ratio increases sensitivity to preform temperature variation across bottle height — precise zone control of the preform temperature profile is the primary lever for consistent optical clarity. The 60-position holder provides adequate dwell time for large-preform temperature conditioning before the blow stage.

Wide-body asymmetric, waisted, and multi-panel large cosmetic containers — the premium packaging category that combines large body diameter with distinctive profile geometry. At 130 mm pitch, the machine can produce special-shaped large-format containers where both the body width and the profile complexity exceed what narrower-pitch machines can handle. The premium cosmetic packaging market increasingly uses large-format special-shaped bottles for brand differentiation at retail.

Internationally sourced servo motors, premium electrical components, and control systems follow standard industrial specifications for local spare part sourcing. Factory-trained engineers handle installation, mold mounting, ES servo calibration, and infrared zone profile setup for the customer's resin grade at commissioning. 5-year spare parts availability commitment on all current HGA.ES series machines.

Large body butter containers, jumbo cream jars, premium body lotion dispensers, and salon-grade body care packaging from 500 ml to 1,500 ml in PET and PETG. The 110 mm maximum body diameter and 98 mm neck diameter cover the wide-mouth and wide-body formats standard in premium body care packaging — where the container size is itself a brand statement and quality driver at retail shelf.

Professional salon shampoo, conditioner, and treatment packaging from 750 ml to 1,500 ml. Salon-grade personal care products consistently use larger container formats than consumer retail — the 130 mm pitch and 1,500 ml maximum volume position the HGA.ES-2C130 directly in this professional packaging category. Wide neck diameter supports the pump-top and flip-top closures standard in professional salon dispensing.

Fabric softener bulk refill bottles, large laundry detergent containers, multi-surface cleaning dispensers, and household chemical packaging from 800 ml to 1,500 ml. The wide neck diameter supports the large pour opening required for refill containers, and the stretch blow wall structure delivers the bottle integrity and stackability needed for bulk retail daily chemical packaging formats.

Large wide-mouth PET and PETG jars for body scrubs, hair masks, premium moisturisers, and specialty cosmetic products where the jar opening itself is part of the product usage experience. The 98 mm maximum neck diameter covers the wide-mouth jar closure standards used across premium body care and hair care packaging — formats that the 88 mm neck of the 114.3 mm pitch machine cannot accommodate at full production diameter.

Blowing pressure: 26–35 kg/cm² · Min. flow: 1,000–1,500 L/min · Oil-free type recommended for cosmetic and personal care packaging

Cooling water: 8–10 °C · Min. flow: 30 L/min · Precise temperature control critical for PETG clarity in large-format wide-body bottles

Operating pressure: 7 kg/cm² · Flow: 600 L/min · For preform conveying, cooling air supply, and mold actuation circuits

"We produce large body butter jars and premium cream containers — 800 ml and 1,200 ml PETG formats with 98 mm neck diameter. The 130 mm pitch machine was the only model in the series that could produce these formats. Wall thickness is consistent across both cavities. The enhanced servo configuration handles the large blow ratio reliably at sustained production rate."

Machine: HGA.ES-2C130

"We supply salon-grade shampoo and conditioner packaging — 1,000 ml and 1,500 ml PET formats for professional salon brands. The wide neck diameter and large body were requirements we could not meet on the 114.3 mm pitch machine. The HGA.ES-2C130 fits our specification exactly. Output has been consistent at close to 1,800 bph. Support during commissioning was thorough."

Machine: HGA.ES-2C130

"We produce large daily chemical refill containers — 1,200 ml fabric softener and laundry detergent in PET. Wide pour neck is essential. The machine produces consistent bottles at production rate. Mold change-over takes longer than smaller-format machines due to the larger mold size, but that is expected at this container scale. Quality and after-sales support have been good."

Machine: HGA.ES series

"We export large-format PETG body care containers — 600 ml and 1,000 ml premium body lotion dispensers for an export brand. Optical clarity and neck-finish dimensional consistency are buyer requirements. The HGA.ES-2C130 has met both requirements consistently. The infrared zone calibration during commissioning was done carefully by the Ever-Power engineer, and the result has been stable production since."

Machine: HGA.ES-2C130

Q1: What container formats require the 130 mm pitch rather than the 114.3 mm pitch?

Any container with a body diameter between 94 mm and 110 mm, a neck diameter between 88 mm and 98 mm, or a volume between 1,000 ml and 1,500 ml. These are the formats that exceed the capacity envelope of the HGA.ES-2C114.3 (94 mm body, 88 mm neck, 1,000 ml max) and do not yet require the 150 mm pitch. Contact Ever-Power with your bottle drawing for a confirmed pitch recommendation.

Q2: Why is enhanced servo particularly important for large-format containers?

Large-format containers at 110 mm body diameter and 1,500 ml volume require the longest blow strokes and highest blow ratios in the HGA.ES 2-cavity range. At higher blow ratios, any timing variation in the stretch-blow sequence is amplified into proportionally larger wall-thickness errors in the bottle shoulder and base. The ES enhanced servo's faster response reduces this timing variation — directly improving wall-thickness consistency where it is hardest to achieve and most visible in large-format containers.

Q3: Can the machine process PETG for premium body care and cosmetic jar production?

Yes. The zone-level digital infrared heating system provides the preform temperature precision PETG requires. For large-format PETG containers — where the high blow ratio at 110 mm diameter increases sensitivity to preform temperature variation — the infrared zone profile calibration is particularly important. Ever-Power's commissioning engineers set this profile during installation for the customer's specific PETG grade. Contact Ever-Power with your PETG datasheet before ordering tooling.

Q4: What compressed air specification is required?

Low pressure: 7 kg/cm² at 600 L/min. High pressure: 26–35 kg/cm² at 1,000–1,500 L/min. An oil-free air compressor is recommended for cosmetic and personal care packaging. Despite the larger container format, the 2-cavity configuration maintains a comparable high-pressure air requirement to other 2-cavity HGA models.

Q5: What is the machine footprint?

3,600 mm (L) x 1,800 mm (W) x 1,980 mm (H), 3,000 kg. Larger than the HGA.ES-2C114.3 (3,220 x 1,660 x 2,010 mm, 3,000 kg) to accommodate the wider mold station and longer blow stroke at 130 mm pitch. Allow clearance on all four sides for mold change-over, operator access, and maintenance. At 1,980 mm height, the machine fits standard factory bay ceiling clearances for this container size class.

Q6: What certifications does the machine carry?

CE marking and ISO 9001:2015 are standard on all HGA series machines. CE Declaration of Conformity available for review before order. Factory acceptance test report on buyer-specified preform and container format supplied at delivery. Additional documentation available on request for export-market quality audit compliance or pharmaceutical packaging requirements.

Q7: What is the theoretical output and how does it compare to smaller-pitch models?

Theoretical output is 1,800 bph — lower than the 2,000 bph of the HGA.ES-2C114.3 and 2,400 bph of the HGA.ES-2C100, reflecting the longer blow stroke and extended cooling time required by larger-format containers. For production planning purposes, large-format containers up to 1,500 ml at 1,800 bph represent a higher value-per-bottle throughput than smaller-format machines at higher bph rates — the relevant production planning metric for premium cosmetic and daily chemical packaging operations.

Q8: What after-sales support is available?

Remote technical support during business hours. Spare parts stocked with a 5-year minimum availability commitment. ES servo components sourced from brands with wide regional distributor coverage for local availability. Engineers dispatched for on-site service for faults not resolvable remotely. Wear parts and consumables for all current HGA.ES series machines are held in inventory at Ever-Power's production facility.

Same ES enhanced servo configuration at 114.3 mm pitch for containers up to 94 mm body diameter, 88 mm neck, and 1,000 ml. The step below the 2C130 in the ES series.

View HGA.ES-2C114.3 →

Same ES enhanced servo configuration in the most compact footprint of the series — for mid-size cosmetic and personal care containers up to 80 mm body diameter, 68 mm neck, and 500 ml.

View HGA.ES-2C100 →

Browse the complete Ever-Power HGA cosmetic and daily chemical blow molding machine series — AS and ES configurations, all cavity pitch options from 76.2 mm to 200 mm, and the full output capacity range.

View Full Series →