HGA.ES-2C130 Water Beverage Pesticide Chemical Bottle Blow Molding Machine
HGA.ES-2C130 — 2-cavity blow molding machine for PET water, beverage, pesticide and chemical bottles up to 1,500 ml. 1,800 bph, 110 mm max body, 98 mm max neck. 3,600 x 1,800 x 1,980 mm, 3,000 kg. CE + ISO 9001:2015.
2-Cavity 130 mm Pitch — 1.5-Litre Wide-Body PET Bottle Platform
The HGA.ES-2C130 is the 130 mm pitch 2-cavity machine in the Water, Beverage, Pesticide & Chemical Bottle series. It produces PET bottles up to 110 mm body diameter, 98 mm neck diameter, and 1,500 ml volume at 1,800 bph. The 130 mm pitch opens the body ceiling from the 2C114.3's 94 mm to 110 mm — accommodating the family-size beverage bottle formats and wider-body chemical containers that narrower-pitch machines cannot produce.
The 1,500 ml maximum volume and 110 mm body are the defining specifications of this model. On the beverage side, these cover the 1.5-litre water and CSD bottle — the dominant family-size format in retail globally — and large-volume iced tea and juice containers. On the chemical side, the 110 mm body suits 1-litre to 1.5-litre engine oil, industrial cleaning fluid, and concentrated agrochemical containers where a wider grip profile and larger label area are product design requirements.
At 3,600 x 1,800 x 1,980 mm and 3,000 kg, the HGA.ES-2C130 is notably larger than the 2C114.3 — site preparation and floor load verification are required before installation. CE certification and ISO 9001:2015 manufacturing apply across the full series.
HGA.ES-2C130 — Full Parameter Table
| Molding Configuration | |
| Clamping Stroke | 160 mm |
| Mold-Open Distance | 360 mm |
| Mold-Close Distance | 200 mm |
| Stretching Stroke | 350 mm |
| Bottom Mold Open Distance | 50 mm |
| Cavity Pitch | 130 mm |
| Preform Holder Capacity | 60 positions |
| Number of Cavities | 2 |
| Container Specifications | |
| Max. Container Volume | 1,500 ml |
| Max. Neck Diameter | 98 mm |
| Max. Container Body Diameter | 110 mm |
| Max. Container Height | 250 mm |
| Compatible Materials | PET |
| Theoretical Output | 1,800 bph |
| Electrical System | |
| Max. Heating Power | 42.5 KW |
| Standard Operating Heating Power | 8 – 13 KW |
| Air System | |
| Low Pressure Operating Pressure | 7 kg/cm² |
| Low Pressure Air Consumption | 600 L/min |
| Blowing Pressure | 26 – 35 kg/cm² |
| High Pressure Air Consumption | 1,000 – 1,500 L/min |
| High Pressure Operating Pressure | 5 – 6 kg/cm² |
| Cooling Water | |
| Operating Pressure | 5 – 6 kg/cm² |
| Temperature | 8 – 10 °C |
| Flow Rate | 30 L/min |
| Machine Dimensions | |
| Size (L x W x H) | 3,600 x 1,800 x 1,980 mm |
| Weight | 3,000 kg |
Source: Ever-Power HGA Water, Beverage, Pesticide & Chemical Bottle Series specification sheet. Confirm container geometry with Ever-Power before tooling order.
One Machine, Two Bottle Categories
The 110 mm body and 98 mm neck cover family-size beverage formats and wider-body chemical containers — both categories served from a single 130 mm pitch 2-cavity platform at 1,800 bph.
Water & Beverage
Standard 1,500 ml mineral water PET — the dominant family-size format in retail globally. The 110 mm body matches the label width of major 1.5-litre water brands.
Water & Beverage
1,000 ml – 1,500 ml carbonated soft drink and juice PET bottles for family-size retail. The wider body provides larger label area and improves shelf presence versus narrower formats.
Water & Beverage
1,000 ml – 1,500 ml iced tea, functional drink, and flavoured water in wide-body PET. Hot-fill and cold-fill preform compatibility at 98 mm neck ceiling.
Pesticide & Chemical
1,000 ml – 1,500 ml concentrated pesticide and herbicide PET bottles. The wider 110 mm body accommodates trigger-spray and dosing handle fitments used in retail agrochemical packaging.
Pesticide & Chemical
1,000 ml – 1,500 ml engine oil and transmission fluid PET bottles for automotive aftermarket retail. The 110 mm body matches standard 1-litre and 1.5-litre oil bottle geometries used in Korea and SEA retail channels.
Pesticide & Chemical
1,000 ml – 1,500 ml industrial cleaning fluid and disinfectant PET bottles for institutional and commercial supply. Wide body and 98 mm neck accommodate trigger-pump closures for professional-use formats.
HGA.ES-2C130 in the Series
| Model | Cavities | Output | Max Body | Max Neck | Max Vol. |
|---|---|---|---|---|---|
| HGA.ES-2C100 | 2 | 2,400 bph | 80 mm | 68 mm | 500 ml |
| HGA.AS-2C114.3 | 2 | 2,000 bph | 94 mm | 88 mm | 1,000 ml |
| HGA.ES-2C130 ★ | 2 | 1,800 bph | 110 mm | 98 mm | 1,500 ml |
| HGA.ES-4C76 | 4 | 4,800 bph | 68 mm | 48 mm | 700 ml |
| HGA.ES-4C100 | 4 | 4,600 bph | 80 mm | 68 mm | 800 ml |
Choose the 2C130 when your bottle requires a body wider than 94 mm or volume above 1,000 ml at 2-cavity scale. For higher output at the same 110 mm body, consider 4-cavity configurations in the series.
Why Choose the HGA.ES-2C130
1,500 ml is the highest-volume single-serve beverage format in global retail — the dominant family-size water bottle from Korea to Indonesia to the Middle East. The HGA.ES-2C130 is built around this format, with 110 mm body and 250 mm height matched to the physical geometry of the standard 1.5-litre PET bottle.
Moving from 114.3 mm to 130 mm pitch expands the body from 94 mm to 110 mm and the volume from 1,000 ml to 1,500 ml — while maintaining the same 2-cavity configuration. For operations that validated their format on the 2C114.3 and need to grow into 1.5-litre production, the 2C130 is the natural step up without changing cavity count. See the full series range.
130 mm is the most widely used cavity pitch for 1.5-litre PET bottle production globally — the standard pitch used on both Korean and international SBM platforms at this body diameter. Existing 130 mm blow mold tooling from compatible SBM manufacturers may be assessable for cross-platform use, subject to Ever-Power tooling verification.
At 3,600 mm length and 3,000 kg, the 2C130 is significantly larger than the 2C114.3 (2,660 mm, 2,600 kg). Floor load verification by a structural engineer is recommended before installation. High-pressure air at 1,000–1,500 L/min and 42.5 KW max heating require advance utility planning from Ever-Power's specification document.
What Customers Say
"Our primary product is 1.5-litre mineral water for domestic retail distribution. The 2C130 at 1,800 bph matches our filling line exactly at two-shift operation. The 110 mm body and 250 mm height match our label specification without any adjustment. We also run 1-litre iced tea bottles on the same machine with a short changeover — the dual-use capability reduces our tooling investment significantly."
HGA.ES-2C130
"1-litre engine oil bottles for aftermarket retail. The 110 mm body was essential for our grip-panel design requirement — the 94 mm machines we looked at were too narrow. Factory acceptance testing covered both cavities and production consistency was confirmed before shipment. 1,800 bph is the right output for our production schedule without running overtime."
HGA.ES-2C130
"We produce 1,500 ml juice bottles for export markets alongside 1-litre concentrated cleaning fluid. The 2C130 handles both. One practical note: at 3,600 mm and 3,000 kg this machine needed a dedicated bay — it would not fit our existing layout. Plan your site before ordering. The utility specification document from Ever-Power was complete and we sized our compressed air installation correctly from it."
HGA.ES-2C130
Frequently Asked Questions
Other Models in the Series
Request a Quote for HGA.ES-2C130
Send us your bottle specification — body diameter, neck diameter, height, volume, and required output per shift — and our engineers will confirm tooling feasibility and respond within 2 business days.
Additional information
| Editor |
|---|
Related products
-
HGA.ES-4C130 Water Beverage Pesticide Chemical Bottle Blow Molding Machine
-
HGA.JS-2C366 Water Beverage Pesticide Chemical Bottle Blow Molding Machine
-
HGA.ES-6C114 Water Beverage Pesticide Chemical Bottle Blow Molding Machine
-
HGA.ES-8C76 Water Beverage Pesticide Chemical Bottle Blow Molding Machine
-
HGA.AS-2C114.3 Water Beverage Pesticide Chemical Bottle Blow Molding Machine
-
HGA.ES-4C100 Water Beverage Pesticide Chemical Bottle Blow Molding Machine
-
HGA.ES-4C76 Water Beverage Pesticide Chemical Bottle Blow Molding Machine
-
HGA.ES-2C100 Water Beverage Pesticide Chemical Bottle Blow Molding Machine
