Riscaldatore per preforme a collo largo HGJ-B – 18/36 posizioni | 500–1.000 preforme/ora
Infrared preform heater for wide-neck PET jar and bottle production. 18-position configuration for neck finishes up to 130 mm; 36-position for up to 65 mm. 500–1,000 preforms/hour, 5–8 kW, three-phase power, 160 mm max preform height, 400 kg. For use with Korea Ever-Power HGS series semi-automatic blow molding machines.
HGJ-B
Wide-Neck Jar Preform Infrared Heater — 18-Position (130 mm max neck) / 36-Position (65 mm max neck) · 500–1,000 Preforms/Hour
5–8 kW · Three-Phase Four-Wire · 400 kg · 1,880×720×1,200 mm · For HGS Series Semi-Automatic Blow Molding Machines · Korea Ever-Power
Panoramica del prodotto
IL HGJ-B is Korea Ever-Power's wide-neck jar preform infrared heater — the companion unit for HGS Series semi-automatic blow molding machines when the preform neck finish exceeds the 68 mm ceiling of the standard HGJ-CL heater. Available in two configurations — 18-position for neck finishes up to 130 mm, E 36-position for neck finishes up to 65 mm — the HGJ-B covers the wide-neck PET jar, cosmetic container, and large-mouth bottle formats that require a dedicated heater design.
The HGJ-B uses digital infrared zone heating to condition preforms to the correct blow temperature before operator transfer to the HGS blow station. The wide holder geometry accommodates wide-neck preform bodies that cannot be seated in the standard 96-position HGJ-CL carousel. At 500–1,000 preforms per hour throughput, the HGJ-B is matched to the output range of the HGS150A and HGS200A when producing wide-neck jar formats.
▶ Preform neck finish diameter exceeds 68 mm
▶ Producing wide-mouth jars, cosmetic pots, or large-neck containers
▶ Wide-neck preform body width prevents seating in standard 96-position carousel
▶ Required throughput is 500–1,000 preforms/hour
The HGJ-B is available in two holder configurations — the correct choice depends on your preform neck finish diameter.
Matching HGJ-B to Your HGS Machine
The HGJ-B is sold separately from the HGS blow molding machine. Select the correct heater model based on your preform neck finish diameter — not your bottle body diameter.
| HGS Machine | Volume della bottiglia | Use HGJ-B When... | Use HGJ-CL When... |
|---|---|---|---|
| HGS150A | Up to 1 L | Neck finish >68 mm (wide-mouth jar format) | Neck finish ≤68 mm (standard bottle) |
| HGS200A | Up to 1.25 L | Neck finish >68 mm (wide-mouth jar format) | Neck finish ≤68 mm (standard bottle) |
| HGS200B | Up to 1.25 L hot-fill | Wide-neck hot-fill container (>68 mm) | Standard-neck hot-fill (tea, juice — most common) |
| HGS250A | Up to 5 L | Wide-neck large jar or drum (>68 mm neck) | Standard-neck 5L bottle (most common) |
| HGS280A / HGS350A | Up to 10–20 L | Rare — confirm with Korea Ever-Power | Standard-neck 10–20L containers (typical) |
Specifiche tecniche
| Capacità della preforma | |
| Preform Positions (18-position config) | 18 · max neck 130 mm |
| Preform Positions (36-position config) | 36 · max neck 65 mm |
| Altezza massima del preformato | 160 mm |
| Spessore della parete della preforma | 2,5 – 4,2 mm |
| Prestazioni di produzione | |
| Flusso di lavoro | 500 – 1,000 preforms/hour |
| Elettrico | |
| Alimentazione elettrica | Trifase a quattro fili |
| Consumo energetico | 5 – 8 kW |
| Metodo di riscaldamento | Controllo digitale a infrarossi delle zone |
| Dimensioni della macchina | |
| Dimensioni (L × P × A) | 1,880 × 720 × 1,200 mm |
| Peso della macchina | 400 kg |
| Macchine per soffiaggio compatibili | |
| Da utilizzare con | HGS150A, HGS200A, HGS200B, HGS250A, HGS280A, HGS350A (when preform neck >68 mm) |
| Venduto come | Unità separata: quotata e spedita insieme alla macchina HGS. |
Caratteristiche principali
Wide Holder Geometry — 130 mm Max Neck
The HGJ-B's 18-position holders are dimensioned to seat preforms with neck finishes up to 130 mm — the widest in the HGJ range. Standard 96-position carousel heaters are designed for preform neck finishes typically up to 38–68 mm; they cannot physically accommodate the wider preform body and neck thread geometry of wide-mouth jar preforms. The HGJ-B's dedicated wide-holder design is the enabling condition for semi-automatic wide-neck jar production on the HGS series.
Digital Infrared Zone Control
The HGJ-B uses digital infrared zone heating to condition preforms to the correct blow temperature profile. Zone control allows different sections of the preform body to be heated to different temperatures — critical for wide-neck jar preforms where the body wall thickness distribution and the relationship between body and neck heat profile differs significantly from standard bottle preforms. Consistent zone temperatures across the carousel produce consistent wall thickness distribution in the blown container.
Two-Configuration Flexibility — One Heater Platform
The HGJ-B platform supports two holder configurations: 18-position for very wide necks up to 130 mm, and 36-position for medium-wide necks up to 65 mm. Specify which configuration matches your preform neck finish at the quotation stage. Operations producing two wide-neck formats — one exceeding 65 mm and one within 65 mm — may require one of each configuration or a single 18-position unit running both at lower throughput.
Matched Throughput for Wide-Neck HGS Production
At 500–1,000 preforms/hour, the HGJ-B is matched to the realistic operator output rates achievable on the HGS150A and HGS200A when producing wide-neck jar formats — which typically run at lower BPH than standard bottle formats due to longer mold open/close time and greater container volume per cycle. The heater throughput ceiling of 1,000 preforms/hour means the blow station operator is never held waiting for conditioned preforms.
Informazioni su Korea Ever-Power
Korea Ever-Power designs and manufactures both the HGS blow molding machines and the HGJ infrared heater units as an integrated system — the heater configuration is specified at the same time as the machine to ensure correct compatibility. The HGJ-B is supplied alongside the HGS machine as part of a complete quotation. For wide-neck jar production requirements, Korea Ever-Power can also advise on mold design within the HGS machine's mold capacity range.
Domande frequenti
How do I know if I need the HGJ-B or the HGJ-CL?
The deciding factor is your preform neck finish diameter — not your bottle body diameter. If your preform neck finish exceeds 68 mm, you need the HGJ-B. If your preform neck finish is 68 mm or below, use the HGJ-CL. When in doubt, provide your preform drawing or specification to Korea Ever-Power at the quotation stage — the correct heater model will be specified based on the actual preform geometry.
Which HGJ-B configuration should I choose — 18-position or 36-position?
If your preform neck finish is between 66 mm and 130 mm, you need the 18-position configuration — the 36-position cannot accommodate necks above 65 mm. If your preform neck finish is between 50 mm and 65 mm (wider than the HGJ-CL's 68 mm ceiling due to body width clearance issues, but within 65 mm neck diameter), the 36-position delivers higher throughput (800–1,000 vs 500–600 preforms/hour). Specify your exact preform neck finish diameter at the quotation stage.
Is the HGJ-B sold separately or only with an HGS machine?
The HGJ-B is a separate item in the quotation and can be purchased independently of an HGS machine — for example, if you already own an HGS machine and need to add a wide-neck heater for a new preform format. However, Korea Ever-Power recommends quoting the heater alongside the machine purchase so that the configuration is confirmed compatible with the specific HGS model and preform specification before order.
What is the HGJ-B's heating method and how consistent is zone temperature control?
The HGJ-B uses digital infrared zone control — the carousel positions pass through infrared heating zones where digital temperature setpoints determine the heat delivered to each section of the preform body. Zone control consistency directly affects wall thickness distribution in the blown container: inconsistent zone temperatures produce uneven material distribution and off-spec bottles. Korea Ever-Power's commissioning team sets and verifies zone temperatures during installation for the specific preform geometry specified at order.
Get a Quote for the HGJ-B
Tell us your preform neck finish diameter, preform height, wall thickness, and the HGS machine model you are pairing with. We will specify the correct HGJ-B configuration and provide pricing within 2 business days.
Informazioni aggiuntive
| Redattore |
|---|
Prodotti correlati
-
Macchina soffiatrice semiautomatica a riempimento a caldo HGS200B – 1,25 l | 400–550 bph
-
Macchina per soffiaggio semiautomatica HGS250A – 5L | 500–980 BPH
-
Macchina per soffiaggio semiautomatica HGS200A – 1,25 l | 500–980 bph
-
Macchina per soffiaggio semiautomatica HGS150A – 1L | 500–1100 BPH
-
Macchina per soffiaggio semiautomatica HGS280A – 10L | 500–980 BPH
-
Macchina per soffiaggio semiautomatica HGS350A – 20L | 150–400 BPH
-
Riscaldatore per preforme a collo standard HGJ-CL – 96 posizioni | 200–2.100 preforme/ora
