IBM製シャンプーボトル：
HDPEヘアケア コンテナガイド

150～200ml 楕円形

本体幅：55～65mm

型締め力拘束条件 — HDPE射出成形時、キャビティあたり40～50 kN。ZQ110は1,100 kNの型締め力のみで22～27個のキャビティを成形できますが、プラテンの制約により、このボディ幅では14～18個のキャビティに制限されます。14個のキャビティは、200 mlの楕円形シャンプーにおけるZQ110の実用的な最大値です。

300ml オーバル型 ★ 最も一般的

本体幅：65～75mm

この本体幅（65～75mmの楕円形の本体形状で、中心間隔が15～20mmと十分）では、ZQ110プラテンはクランプ力に達する前に6～8個のキャビティしか成形できません。6個のキャビティは、ZQ110で300mlの韓国製シャンプーを成形する際の標準生産数です。

500ml ワイドボディ

本体幅：75～90mm

プラテンの締め付けによる制約が主な要因です。500mlで75～90mm幅の容器の場合、ZQ110のキャビティ数は4～6個に制限されます。500mlでの射出量（約22～28gのHDPE）も、6キャビティの場合、ZQ110の射出量制限に近づきます。4キャビティは、ZQ110で500ml幅広韓国シャンプーを安全に製造するための標準です。

製品タイプ

界面活性剤濃度

ESCR F50が必要です

HDPE MI / 密度

IBM blow mould parting line is located at the container base — outside the visible body panel that Korean acceptance inspectors assess under 1,000 lux directional lighting at 45° incidence. The IBM bottle body has no visible seam from shoulder to base. EBM shampoo bottles have a parting line running vertically through the body’s widest point — highly visible on oval and rounded-rectangle Korean shampoo body shapes because the seam interrupts the smooth curvature that Korean K-beauty premium packaging designers specify. Korean premium tier (AmorePacific Mise en Scene, LG H&H Elastine, Aekyung Kerasys) rejects EBM bottles at Korean acceptance inspection for this criterion.

Korean premium shampoo bottles commonly specify embossed brand logos, ingredient icons or decorative patterns on the bottle body. IBM’s blow mould cavity machined with the embossed geometry transfers the embossing onto the HDPE bottle body during the blow phase — producing sharp, consistent embossed detail (typically 0.3–0.8 mm depth, 0.2 mm minimum radius on design corners) across all cavities. EBM can emboss from the blow mould cavity but produces lower dimensional fidelity (rounded corners, inconsistent depth across cavities due to parison thickness variation at the emboss zone) — Korean brand logo embossing with sharp 90° corners requires IBM’s injection-preform wall consistency at the emboss zone.

Korean hair care bottles are used in Korean shower environments where drops from 1–1.2 m height onto Korean ceramic tile floors are normal use conditions. Korean premium brand drop-impact specification: no cracking, no base deformation, no pump neck damage at 1 m drop onto ceramic tile at 23°C, filled to 90% nominal volume, 3 consecutive drops. IBM’s uniform wall (±5% CV) ensures the bottle base and shoulder wall thickness meets the minimum wall specification at all angular positions — IBM bottles consistently pass the 3-drop test at 0.5 mm minimum wall. EBM bottles with ±15–20% wall variation can produce localised thin zones at the base corner (below 0.35 mm) that fail the drop-impact test — requiring EBM producers to specify heavier average wall (0.8–1.0 mm vs IBM’s 0.5–0.7 mm) to compensate, increasing resin cost by 20–30%.

IBMは、外見が全く同じ韓国製のシャンプーボトルと、それに合わせたシャンプーとコンディショナーのセットを製造できますか？

Yes — IBM’s most common Korean K-beauty hair care production configuration is a matched shampoo and conditioner bottle pair produced on the same ZQ110 machine with two mould sets sharing the same body geometry. The shampoo and conditioner bottles use the same blow mould cavity design (same body height, body shape, shoulder curve, base profile and neck finish) with the only physical difference being the body wall colour (a different colour masterbatch in the HDPE — shampoo in the brand’s primary colour, conditioner in a secondary colour) and, if volumes differ, the preform shot weight. Korean hair care brands specify matched pairs because Korean consumers purchase shampoo and conditioner together as a set — packaging visual continuity between the two bottles at Korean retail shelf display is a Korean brand equity requirement. Korea Ever-Power produces matched shampoo-conditioner IBM mould sets as a standard paired order — the two blow moulds share the same cavity geometry drawing with only the body label panel zone depth (shampoo: 0.8 mm label zone depth recess; conditioner: 0.6 mm recess, to visually differentiate the two bottles’ label areas while maintaining the same external body silhouette) and the same Korea Ever-Power dimensional qualification report format covering both mould sets. Production on the ZQ110 machine alternates between shampoo and conditioner mould sets during the Korean filling line’s production schedule — typically 3–5 days on shampoo mould, 3–5 days on conditioner mould, with a 2-hour mould change between formats.

韓国版IBMシャンプーボトルにはどのような本体カラーの選択肢があり、それらのカラーマッチングはどのように行われているのですか？

Korean K-beauty hair care IBM shampoo bottles are produced in four colour category options with different HDPE masterbatch requirements. First, opaque solid colour (the most common Korean premium option): colour masterbatch at 0.5–2.5% loading in HDPE — Korean brand Pantone reference matched to deltaE ≤ 1.5 at production conditions. White opaque is the most requested Korean K-beauty clean beauty shampoo colour, requiring TiO₂ masterbatch at 1.5–2.5% at the IBM body wall thickness for full opacity; Korean brands targeting purity and clean beauty positioning specify white opaque most frequently. Second, translucent (semi-transparent): low masterbatch loading (0.1–0.5% tint), HDPE body is semi-transparent so product formulation colour is visible through the wall — Korean brands with visually distinct shampoo formulations (blue tint, gold tint, pearlescent formula) use this option for product differentiation at Korean retail. Third, metallic effect: pearlescent masterbatch (mica-based, 0.3–0.8%) produces a silver, gold or rose-gold metallic sheen on the HDPE body — popular for Korean premium gift sets and Korean duty-free special editions. Fourth, natural/cream white translucent: no masterbatch or very low tint, HDPE’s natural milky appearance — used by Korean natural and organic K-beauty brands as a clean packaging aesthetic. IBM colour stability across production batches is confirmed by Korean brand colour acceptance — production lots are measured with a 45/0° spectrophotometer at the start of each batch, and production continues if colour deltaE from the approved standard lot is within ±1.5. IBM’s consistent barrel temperature and cycle time produce batch-to-batch colour stability at Cpk ≥ 1.33 for deltaE versus reference standard — a consistency that Korean K-beauty packaging QA teams cite as one reason they specify IBM over EBM for premium opaque shampoo bottles.

韓国ブランドが長方形の断面形状のシャンプーボトルを要求した場合、IBMは韓国でのシャンプーボトル製造をどのように処理するのでしょうか？

Rectangular cross-section shampoo bottles — flat-panel bottles with defined front and back panels, sharp corner radii (typically R 3–8 mm) and flat label panels — are achievable in IBM but require careful preform geometry design to avoid the wall thinning challenge that rectangular cross-sections create. The challenge: when a cylindrical preform is blown into a rectangular blow mould cavity, the material at the mould corner zones must travel further to reach the corner than it does at the flat panel faces — producing corner zones thinner than flat-panel zones if the preform is not designed to compensate. Korea Ever-Power’s approach: (1) corner-biased preform wall profile using a slightly non-circular preform cross-section that places more material at the corner blow directions; (2) minimum corner radius R ≥ 5 mm on the blow mould cavity geometry — radii below R 3 mm produce wall thinning below 0.3 mm that fails Korean drop-impact tests; (3) corner wall measurement at 4 angular positions per cavity in the pre-delivery qualification report. Korean brands specifying rectangular shampoo IBM should communicate the minimum corner radius to Korea Ever-Power’s mould design team before machining — changing corner radius after mould production requires cavity welding and re-machining that adds 2–3 weeks to the mould qualification timeline.

IBMのHDPEボトルの性能を検証するために、韓国製の新しいシャンプー処方に対して適切なESCR試験は何ですか？

新しい韓国製シャンプーの処方の場合、推奨されるESCR検証方法は、標準的なASTM D1693 Igepal代替試験ではなく、処方固有の充填容器静的浸漬試験です。手順: (1) 目標HDPEグレードからキャビティあたり30個のIBM容器を製造します。(2) 実際の韓国製シャンプー処方を95%充填量で充填します。(3) 韓国の充填ライン適用トルクで生産ポンプを使用してシールします。(4) 50℃で1,000時間水平に保管します。(5) 250時間、500時間、1,000時間で、肩部と底角部の表面のひび割れ、壁の薄化、または変形を検査します。合格: 検査間隔でひび割れや目に見える損傷がないこと。この処方固有の試験は、韓国の硫酸塩フリーシャンプーとシリコーンコンディショナーがIgepalでは完全に捉えきれないESCRの攻撃性を持っているため、Igepal代替試験よりも代表的です。韓国エバーパワー社は、韓国製品開発段階（発売の12～16週間前）に、韓国エバーパワー社製IBMコンテナのサンプルを用いてこの試験を実施することを推奨しています。これにより、金型が製造された後ではなく、HDPEグレードの選定段階でESCR不良を特定することができます。

韓国の高級シャンプー用IBMボトルにおいて、PPはHDPEの代替として有効な選択肢となるでしょうか？

PP is technically viable for Korean shampoo IBM but specified less frequently than HDPE for three reasons. First, PP IBM shampoo bottles feel stiffer and lighter than HDPE at the same wall thickness — the “soft squeeze” tactile quality that Korean consumer research identifies as premium is a function of HDPE’s lower flexural modulus (0.7–1.4 GPa vs PP’s 1.4–2.0 GPa). Second, PP masterbatch colour matching at IBM conditions requires more extensive approval trials because PP’s higher processing temperature causes more colour shift in heat-sensitive pigments, making Korean brand colour specs (deltaE ≤ 1.5) harder to maintain batch-to-batch. Third, PP ESCR in surfactant environments is not meaningfully better than HDPE — both stress-crack, through different mechanisms, eliminating the principal reason one might switch from HDPE to PP. PP is chosen for Korean shampoo IBM in three cases: crystal-clear bottles where PP’s lower IBM haze (8–15% vs HDPE’s 20–35%) justifies the switch; natural/organic brands for ESG recyclability positioning; and hot-fill hair treatments filled above HDPE’s HDT (above 75°C).

IBMとISBMの300ml韓国製高級シャンプーボトルの製造コストを比較するとどうなりますか？

IBM HDPE and ISBM PET compete for Korean premium shampoo at 300 ml. ISBM PET advantages: superior transparency (haze below 2% vs HDPE’s 20–35%), higher oxygen/water vapour barrier for volatile fragrance stability, and lighter container weight at equivalent structural performance. IBM HDPE advantages: HDPE resin 30–50% lower cost per kg than PET; IBM 6-cavity mould sets cost approximately 60–70% of equivalent ISBM 4-piece mould sets; and HDPE ESCR ≥ 300 h in 10% SLES versus PET which has no meaningful ESCR (PET can absorb fragrance components causing clarity degradation over Korean 24-month shelf life). Korean K-beauty brands specifying HDPE shampoo at 300 ml at 5–20M annual volume typically choose IBM over ISBM because total production cost (resin + mould depreciation + machine depreciation) is 15–25% lower for IBM HDPE at this volume range, and IBM HDPE’s zero parting line and colour opacity meet Korean premium acceptance criteria without the ISBM PET price premium.