{"id":1027,"date":"2026-07-03T06:42:19","date_gmt":"2026-07-03T06:42:19","guid":{"rendered":"https:\/\/isbm-blow-molding.com\/?post_type=product&p=1027"},"modified":"2026-07-03T06:42:20","modified_gmt":"2026-07-03T06:42:20","slug":"ep-zq110-injection-blow-molding-machine-european-style","status":"publish","type":"product","link":"https:\/\/isbm-blow-molding.com\/zh\/product\/ep-zq110-injection-blow-molding-machine-european-style\/","title":{"rendered":"EP-ZQ110 \u6ce8\u5851\u5439\u5851\u673a"},"content":{"rendered":"
\n

<\/p>\n

\u4ea7\u54c1\u6982\u8ff0<\/h2>\n

The EP-ZQ110 is the largest standard-configuration model in Korea Ever-Power’s \u6ce8\u5851\u5439\u5851\u673a<\/a> line before the flagship ZQ135. It is the machine that Korean large-scale pharmaceutical contract manufacturers specify when 24-cavity 10 ml or 14-cavity 100 ml output per machine is the production requirement, and when the economics of two ZQ80 machines (at a higher combined investment and greater factory footprint than one ZQ110) no longer justify themselves versus the consolidation of output onto a single heavy-duty platform. At 1,100 KN injection clamping, the ZQ110 carries 37.5% more clamping force than the ZQ80 \u2014 a margin that matters at 24 cavities when the cumulative projected cavity area resisting injection pressure is at its maximum across the series.<\/p>\n

The ZQ110 inherits both premium engineering features that distinguish the ZQ80 from lower-series models: the high-precision angle divider that synchronises mould opening and closing with turret lift for repeatable 24-cavity indexing, and the standard dual hydraulic system (22+22 KW) that delivers 20\u201330% lower energy consumption than single-circuit competitors at the same machine class. These features are included as standard on the ZQ110, not as upgrades \u2014 Korean customers do not pay a premium at time of order to access the productivity and energy efficiency advantages they deliver. The 4+N barrel zone configuration (first introduced in the ZQ series at the ZQ80) continues on the ZQ110, providing the finer gate-zone temperature control that managing large shot weights through 24-cavity hot runner networks requires.<\/p>\n

\"ZQ110\u578b\u6ce8\u5851\u5439\u5851\u673a\"<\/p>\n

The ZQ110’s 65 mm screw and approximately 650 g shot weight serve the largest mould configurations in the ZQ hydraulic series: a full 24-cavity 10 ml hot runner injection mould requires a total runner and cavity resin volume that exceeds the ZQ80’s 55 mm \/ 466 g capacity. The ZQ110’s larger shot weight ensures that all 24 cavities fill simultaneously from a single injection shot without the short-shot risk at the periphery of the hot runner network that occurs when shot weight is marginal relative to the cavity count. At container volumes of 250 ml and above, the ZQ110’s 10-cavity 250 ml and 6\u20138 cavity 500 ml configurations make it a commercially important machine for Korean bulk personal care packaging, Korean cooking oil bottling and Korean industrial chemical container production at output rates that no ZQ60 or ZQ80 can match from a single machine.<\/p>\n

<\/p>\n

Technical Specifications \u2014 EP-ZQ110<\/h2>\n

The following parameters are Korea Ever-Power’s engineering specifications for the EP-ZQ110. Core confirmed specifications are indicated; additional parameters follow the ZQ series engineering progression and should be verified with Korea Ever-Power’s technical team during site preparation planning. All parameters are for reference and may be updated without notice.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u7269\u54c1<\/th>\n\u5355\u5143<\/th>\nEP-ZQ110<\/th>\n<\/tr>\n<\/thead>\n
\u6ce8\u5c04\u7cfb\u7edf<\/td>\n<\/tr>\n
\u87ba\u7eb9\u76f4\u5f84<\/td>\n\u6beb\u7c73<\/td>\n65<\/td>\n<\/tr>\n
\u87ba\u6746\u957f\u5f84\u6bd4<\/td>\n\u2014<\/td>\n22:1<\/td>\n<\/tr>\n
Injection Weight (approx.)<\/td>\ng<\/td>\n~650<\/td>\n<\/tr>\n
\u52a0\u70ed\u529f\u7387<\/td>\n\u5343\u74e6<\/td>\n22<\/td>\n<\/tr>\n
Number of Barrel Zones<\/td>\n\u2014<\/td>\n4+N<\/td>\n<\/tr>\n
Injection Stroke<\/td>\n\u6beb\u7c73<\/td>\n180<\/td>\n<\/tr>\n
\u5939\u7d27\u7cfb\u7edf<\/td>\n<\/tr>\n
Clamping Force \u2014 Injection<\/td>\n\u514b\u52aa\u5c14\u7279\u4eba<\/td>\n1,100<\/td>\n<\/tr>\n
Opening Stroke \u2014 Injection<\/td>\n\u6beb\u7c73<\/td>\n140<\/td>\n<\/tr>\n
Clamping Force \u2014 Blowing (approx.)<\/td>\n\u514b\u52aa\u5c14\u7279\u4eba<\/td>\n~150<\/td>\n<\/tr>\n
Opening Stroke \u2014 Blowing<\/td>\n\u6beb\u7c73<\/td>\n140<\/td>\n<\/tr>\n
Rotary Table Lift Height<\/td>\n\u6beb\u7c73<\/td>\n70<\/td>\n<\/tr>\n
\u6a21\u5177<\/td>\n<\/tr>\n
Max Platen Size (L\u00d7W) approx.<\/td>\n\u6beb\u7c73<\/td>\n~1,000 \u00d7 450<\/td>\n<\/tr>\n
Mould Thickness (approx.)<\/td>\n\u6beb\u7c73<\/td>\n~320<\/td>\n<\/tr>\n
Max Bottle Diameter<\/td>\n\u6beb\u7c73<\/td>\n120<\/td>\n<\/tr>\n
Max Bottle Height<\/td>\n\u6beb\u7c73<\/td>\n220<\/td>\n<\/tr>\n
Suitable Bottle Volume<\/td>\nml<\/td>\n1 \u2013 2,000<\/td>\n<\/tr>\n
Stripping Stroke<\/td>\n\u6beb\u7c73<\/td>\n230<\/td>\n<\/tr>\n
Power, Utilities and Dimensions<\/td>\n<\/tr>\n
Hydraulic Pressure<\/td>\n\u5146\u5e15<\/td>\n14<\/td>\n<\/tr>\n
Motor Power (Dual)<\/td>\n\u5343\u74e6<\/td>\n22 + 22<\/td>\n<\/tr>\n
Dry Cycle<\/td>\ns<\/td>\n4<\/td>\n<\/tr>\n
\u603b\u529f\u7387<\/td>\n\u5343\u74e6<\/td>\n80<\/td>\n<\/tr>\n
Operating Power Ratio<\/td>\n%<\/td>\n52 \u2013 70<\/td>\n<\/tr>\n
Min. Air Pressure<\/td>\n\u5146\u5e15<\/td>\n0.7 \u2013 1.2<\/td>\n<\/tr>\n
Compressed Air Capacity<\/td>\nM\u00b3\/min<\/td>\n0.7<\/td>\n<\/tr>\n
Cooling Water Flow (approx.)<\/td>\nM\u00b3\/h<\/td>\n~5<\/td>\n<\/tr>\n
\u51b7\u5374\u6c34\u538b\u529b<\/td>\n\u5146\u5e15<\/td>\n0.3 \u2013 0.4<\/td>\n<\/tr>\n
Dimensions (L\u00d7W\u00d7H)<\/td>\nM<\/td>\n5 \u00d7 1.8 \u00d7 2.2<\/td>\n<\/tr>\n
\u673a\u5668\u91cd\u91cf<\/td>\nTon<\/td>\n15<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Parameters marked “approx.” are based on ZQ series engineering progression and should be verified with Korea Ever-Power’s technical team. All parameters for reference only.<\/p>\n

EP-ZQ110 Cavity Count Reference by Bottle Volume<\/h3>\n

(Estimated based on ZQ series engineering progression \u2014 confirm with Korea Ever-Power for specific mould configurations)<\/p>\n

\n\n\n\n\n\n
Volume per Bottle<\/th>\n10\u6beb\u5347<\/th>\n30\u6beb\u5347<\/th>\n60 ml<\/th>\n100\u6beb\u5347<\/th>\n250 ml<\/th>\n500 ml<\/th>\n1,000 ml<\/th>\n<\/tr>\n<\/thead>\n
\u6700\u5927\u9f8b\u6d1e<\/td>\n24<\/td>\n20 \u2013 22<\/td>\n16 \u2013 18<\/td>\n14<\/td>\n10<\/td>\n6 \u2013 8<\/td>\n4 \u2013 5<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Cavity counts are for reference. Korea Ever-Power reserves the right to modify specifications without notice.<\/p>\n

<\/p>\n

EP-ZQ110 Production Line: 3-Station Process at 24-Cavity Scale<\/h2>\n

\"Korea<\/p>\n

The EP-ZQ110 operates on the same 3-station concurrent-processing principle as all ZQ series machines, with all three stations \u2014 injection, blow moulding, and stripping \u2014 executing simultaneously on 24 independent mandrel sets. At the ZQ110’s scale, the production line around the machine requires proportionally more careful planning than lower-series models: at 24-cavity 10 ml output at approximately 21,600 bottles per operating hour, the downstream conveyor, inspection, labelling and counting equipment must be able to keep pace without the accumulation buffer becoming a production bottleneck.<\/p>\n

\"EP-ZQ110<\/p>\n

Station 1 \u2014 Preform Injection at 1,100 KN<\/h3>\n

At 1,100 KN injection clamping, the ZQ110 holds a 24-cavity preform mould closed against injection pressure that would cause mould flash or cavity-face separation on machines rated below this threshold at this cavity count. The 65 mm screw delivers approximately 650 g per shot \u2014 sufficient to fill all 24 cavities simultaneously through the hot runner network without the pressure drop across the outer cavities causing short-shots or weight variation between inner and outer cavities. The 4+N barrel zone configuration provides the gate-zone temperature fine-tuning needed to manage resin viscosity at the end of the 24-drop runner network, where flow path length is greatest and melt temperature drop is most significant. The high-precision angle divider begins coordinating the mould-close and turret-lift motions at the end of each cycle, ensuring that the 24 mandrels register to the 24 preform cavities with the same angular precision on cycle 1 as on cycle 1,000,000.<\/p>\n

Station 2 \u2014 Simultaneous 24-Cavity Blow Moulding<\/h3>\n

All 24 preforms are inflated simultaneously at the blow station, supported by approximately 150 KN blow clamping and the dual hydraulic system’s Circuit B \u2014 independent of the injection-side Circuit A. The dual circuit independence is especially important at 24-cavity blow production: in a single-circuit machine, the blow phase immediately follows the injection phase and shares the hydraulic pump that was under maximum load during injection. The residual pressure fluctuation from that transition reaches the blow station and creates non-uniform blow pressure across the 24 cavities. The ZQ110’s dual circuit eliminates this entirely: Circuit A handles injection and recovers while Circuit B handles blow clamping independently at its own steady-state pressure, producing uniform wall thickness distribution across all 24 cavities that single-circuit machines at this cavity count cannot reliably achieve.<\/p>\n

Station 3 \u2014 Output at 24-Bottle-per-Cycle Rate<\/h3>\n

Twenty-four finished bottles are stripped and deposited to the output conveyor every cycle \u2014 at the ZQ110’s 4-second cycle time, this is a conveyor input rate of 6 bottles per second, or approximately 21,600 bottles per operating hour at 90% efficiency. Korea Ever-Power’s production line planning team advises on conveyor speed, accumulation capacity, and the number and type of downstream inspection stations (weight check, dimensional gauge, vision system) required to process the ZQ110’s output without creating a downstream bottleneck that forces the machine to be stopped waiting for downstream clearance. For Korean pharmaceutical production lines, a buffer accumulation table between the ZQ110 and the filling or labelling line is typically specified with sufficient capacity for 5\u20138 minutes of ZQ110 output \u2014 approximately 1,800\u20132,880 bottles at 10 ml format.<\/p>\n

<\/p>\n

EP-ZQ110 at 1,100 KN: Engineering Profile and Series Position<\/h2>\n

The EP-ZQ110 sits at a specific and commercially well-defined position in the ZQ hydraulic series. It is the first model to cross the 1,000 KN injection clamping threshold and the first to achieve 24-cavity production at 10 ml \u2014 the standard maximum cavity count for Korean large-scale pharmaceutical IBM production on a hydraulic platform before moving to the ZQ135. Understanding where the ZQ110 sits in the series, and what the 1,100 KN clamping force specifically enables, helps Korean factory engineers justify the ZQ110 against both ZQ80 and ZQ135 alternatives.<\/p>\n

\n
\n

ZQ80 vs ZQ110 at 24-cavity 10 ml<\/h3>\n

The ZQ80’s 800 KN injection clamping at 20 cavities leaves less than 40 KN per cavity at standard HDPE injection pressure. Running 24 cavities on a ZQ80 would reduce per-cavity clamping margin below the safety threshold for flash-free neck production. The ZQ110’s 1,100 KN at 24 cavities maintains approximately 45 KN per cavity \u2014 within the safe operating range for precision neck production. The 1,100 KN figure is not overspecification; it is the minimum correct specification for 24-cavity operation without flash risk at the neck parting line.<\/p>\n<\/div>\n

\n

ZQ110 vs ZQ135: When to Stop at ZQ110<\/h3>\n

The ZQ135 raises the ceiling to 30 cavities at 10 ml and 1,350 KN, with a 6+N barrel zone configuration for the highest shot weight in the series. For Korean factories whose maximum 10 ml production requirement is 24 cavities \u2014 including most Korean large-scale pharmaceutical contract packaging operations \u2014 the ZQ110 provides the correct output without the additional investment, footprint, weight (15 T vs 18 T) and power consumption (80 KW vs 95 KW) of the ZQ135. The ZQ110 is the technically correct and commercially appropriate upper bound for most Korean IBM factory investments at this scale.<\/p>\n<\/div>\n

\n

One ZQ110 vs Two ZQ80 Machines<\/h3>\n

Two ZQ80 machines at 20 cavities each give 40 cavities total \u2014 higher than the ZQ110’s 24. But this comparison applies only if both ZQ80 machines run the same format simultaneously and no format variety is needed. In Korean pharmaceutical contract packaging where multiple SKUs share production time, the ZQ110’s single-machine operation means half the mould change events, half the startup scrap, one operator position instead of two, and one machine qualification file instead of two in the Korean GMP supplier documentation system \u2014 advantages that compound in value as the number of formats increases.<\/p>\n<\/div>\n<\/div>\n

IBM vs ISBM: Technology Choice at ZQ110 Investment Scale<\/h2>\n

Korea Ever-Power manufactures both the ZQ-series IBM machines and the HGY-series ISBM machines, available in the 4\u5de5\u4f4dISBM\u673a\u5668\u7cfb\u5217<\/a>. At the ZQ110 investment scale, the IBM vs ISBM process question typically resolves quickly on material grounds: the ZQ110 is the correct machine for Korean operations producing HDPE and PP containers, where no ISBM machine can match the ZQ110’s 24-cavity output rate or its material handling range. ISBM machines in the HGY series are the correct choice for Korean operations requiring crystal-clear biaxially oriented PET cosmetic or beverage containers \u2014 a fundamentally different material and bottle physics requirement from the HDPE pharmaceutical bottles that define the ZQ110’s primary market.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n
\u6807\u51c6<\/th>\nIBM (EP-ZQ110)<\/th>\nISBM\uff08HGY\u7cfb\u5217\uff09<\/th>\n<\/tr>\n<\/thead>\n
\u521d\u7ea7\u6750\u6599<\/td>\nHDPE, LDPE, PP, PS, ABS, EVA, PCTG<\/td>\nPET\u3001PETG\u3001Tritan\u3001PC\u3001PP\u3001PCTG<\/td>\n<\/tr>\n
\u6700\u5927\u9f8b\u6d1e\u6570\u4e3a 10 \u6beb\u5347<\/td>\n24 (EP-ZQ110)<\/td>\n\u6700\u591a 12\uff08HGY \u7cfb\u5217\uff09<\/td>\n<\/tr>\n
\u7434\u9888\u7cbe\u7ec6\u52a0\u5de5<\/td>\nInjection-moulded \u2014 highest precision<\/td>\nInjection-moulded \u2014 highest precision<\/td>\n<\/tr>\n
Bottle wall orientation<\/td>\nNon-oriented \u2014 uniform amorphous wall<\/td>\nBiaxially oriented PET \u2014 glass-like clarity<\/td>\n<\/tr>\n
HDPE pharmaceutical bottles<\/td>\n\u539f\u751f\u5e94\u7528<\/td>\n\u4e0d\u9002\u7528<\/td>\n<\/tr>\n
PET cosmetic serum bottles<\/td>\n\u4e0d\u9002\u7528<\/td>\n\u539f\u751f\u5e94\u7528<\/td>\n<\/tr>\n
Zero flash production<\/td>\n\u662f\u7684<\/td>\n\u662f\u7684<\/td>\n<\/tr>\n
Energy saving vs industry<\/td>\n20\u201330% (dual hydraulic)<\/td>\n30\u201340% (servo drive)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

For Korean factory investors whose production is anchored in HDPE and PP pharmaceutical, household chemical or food packaging \u2014 the ZQ110 is the technology of choice and no ISBM machine is a substitute at this output scale. For investments that bridge both HDPE pharmaceutical and PET cosmetic production in the same facility, Korea Ever-Power at isbm-blow-molding.com<\/a> can advise on the correct machine combination.<\/p>\n

<\/p>\n

EP-ZQ110 Application Fields<\/h2>\n
\n
\"HDPE<\/p>\n

Large-Scale Pharmaceutical Manufacturing<\/h3>\n

The ZQ110’s 24-cavity 10 ml and 14-cavity 100 ml configurations serve Korean large pharmaceutical manufacturers and Korean multi-national pharmaceutical contract packagers with annual volumes that require 20,000+ units per operating hour at the 10 ml format. Korean hospital supply chain packagers, Korean clinical trial material producers and Korean over-the-counter medicine container manufacturers all operate at the scale where the ZQ110 is the economically and technically correct single-machine solution.<\/p>\n<\/div>\n

\"HDPE<\/p>\n

Korean National Brand Household Chemical<\/h3>\n

HDPE and PP containers at 6\u20138 cavities 500 ml and 4\u20135 cavities 1,000 ml for Korean national brand shampoo, conditioner, body wash and liquid detergent at output volumes that satisfy Korean supermarket chain supply contracts. Korean household chemical manufacturers whose annual production exceeds 50 million 500 ml units per product line typically find the ZQ110 the correct single-machine investment when ZQ80-scale production (5\u20136 cavity 500 ml) falls short of the volume requirement.<\/p>\n<\/div>\n

\"HDPE<\/p>\n

Food Packaging and Industrial Containers<\/h3>\n

Food-contact-grade HDPE and PP wide-mouth jars at 10 cavities 250 ml for Korean condiment, sauce and honey packaging; Korean cooking oil bottles at 6\u20138 cavities 500 ml; Korean agrochemical mixing containers at 4\u20135 cavities 1,000 ml; Korean industrial reagent containers at HDPE in high-volume formats. The ZQ110’s injection-moulded neck eliminates the parting-line base and neck seam defects that affect extrusion blow moulding at these volumes and neck closure types.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Essential Matching Components for the EP-ZQ110<\/h2>\n

\"Korea<\/p>\n