{"id":1307,"date":"2026-07-21T06:11:13","date_gmt":"2026-07-21T06:11:13","guid":{"rendered":"https:\/\/isbm-blow-molding.com\/?post_type=product&p=1307"},"modified":"2026-07-21T06:11:13","modified_gmt":"2026-07-21T06:11:13","slug":"ep-zq110-ibm-machine-alternative-to-uniloy-uib150","status":"publish","type":"product","link":"https:\/\/isbm-blow-molding.com\/ru\/product\/ep-zq110-ibm-machine-alternative-to-uniloy-uib150\/","title":{"rendered":"EP-ZQ110 IBM Machine \u2014 Alternative to Uniloy UIB150"},"content":{"rendered":"
\n
\n

<\/p>\n

Selection Reference Notice:<\/strong> “Uniloy” and “UIB150” are trademarks of Uniloy (USA), referenced solely to help buyers identify the Korea Ever-Power EP-ZQ110 as a comparable alternative in the same IBM tonnage class. Korea Ever-Power does not manufacture, distribute or represent Uniloy products. All technical data below refers exclusively to the Korea Ever-Power EP-ZQ110.<\/div>\n

<\/p>\n

\u041e\u0431\u0437\u043e\u0440 \u043f\u0440\u043e\u0434\u0443\u043a\u0442\u0430<\/h2>\n

\u041e\u043d Korea Ever-Power EP-ZQ110<\/a><\/strong> is a full European 3-station injection blow molding machine operating in the same tonnage class as the Uniloy UIB150. At 1,100 kN injection clamping<\/strong> \u0438 540 g maximum injection weight<\/strong> at 65 mm screw, EP-ZQ110 brings the European pressurised-clamping architecture \u2014 compact profile, servo rotary table indexing, 10\u201320% per-cycle energy reduction \u2014 directly into the UIB150 market segment.<\/p>\n

\"\u041c\u0430\u0448\u0438\u043d\u0430<\/p>\n

The UIB150 class is where the height consequences of American-style IBM architecture become most acute for Korean pharmaceutical buyers. American-style IBM machines at the UIB150 class typically carry clamping column heights proportional to their 150-tonne rating \u2014 machine heights that routinely reach 3.0\u20133.5 m, exceeding every standard Korean pharmaceutical GMP cleanroom ceiling specification. Korea Ever-Power EP-ZQ110 at 2.2 m machine height<\/strong> fits a 2.7 m GMP cleanroom ceiling with 0.5 m overhead clearance \u2014 the minimum required for barrel heater element service. This 2.2 m profile is maintained despite 1,100 kN clamping force, because the European booster cylinder provides that force in compression without vertical travel clearance requirements.<\/p>\n

\"EP-ZQ110<\/p>\n

\u041e\u043d 1,100 mm wide platen<\/strong> enables 24 cavities at 10 ml and 14 cavities at 100 ml \u2014 the highest output configuration available in the 110-tonne IBM class. At 1.8 m machine width<\/strong>, five EP-ZQ110 units fit in a standard 12 m Korean pharmaceutical production bay, versus four for UIB150-class machines at typical wider American-style footprints. Explore the complete \u043c\u0430\u0448\u0438\u043d\u0430 \u0434\u043b\u044f \u0432\u044b\u0434\u0443\u0432\u043d\u043e\u0433\u043e \u0444\u043e\u0440\u043c\u043e\u0432\u0430\u043d\u0438\u044f<\/a> range for all Korea Ever-Power IBM platforms.<\/p>\n

<\/p>\n

\n
\n
1,100 kN<\/div>\n
\u0420\u0435\u0437\u044c\u0431\u043e\u0432\u043e\u0439 \u0437\u0430\u0436\u0438\u043c
\nUIB150 class<\/div>\n<\/div>\n
\n
540 \u0433<\/div>\n
Max Shot (65mm)
\nSingle screw<\/div>\n<\/div>\n
\n
2.2 m<\/div>\n
Machine Height
\nGMP 2.7m cleanroom fit<\/span><\/div>\n<\/div>\n
\n
1,100 mm<\/div>\n
Platen Width
\n24 cavities @ 10ml<\/span><\/div>\n<\/div>\n
\n
80 kW<\/div>\n
\u0421\u0443\u043c\u043c\u0430\u0440\u043d\u0430\u044f \u043c\u043e\u0449\u043d\u043e\u0441\u0442\u044c
\n3.5 s dry cycle<\/div>\n<\/div>\n
\n
15 T<\/div>\n
\u0412\u0435\u0441 \u043c\u0430\u0448\u0438\u043d\u044b
\n5.0 \u00d7 1.8 m<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\u0422\u0435\u0445\u043d\u0438\u0447\u0435\u0441\u043a\u0438\u0435 \u0445\u0430\u0440\u0430\u043a\u0442\u0435\u0440\u0438\u0441\u0442\u0438\u043a\u0438<\/h2>\n

\"EP-ZQ110<\/p>\n

All parameters sourced from Korea Ever-Power ZQ110 product specification data.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u041f\u0430\u0440\u0430\u043c\u0435\u0442\u0440<\/th>\nEP-ZQ110 Value<\/th>\n<\/tr>\n<\/thead>\n
\u043a\u043e\u043c\u043f\u043e\u043d\u043e\u0432\u043a\u0430 \u0441\u0442\u0430\u043d\u043a\u0430<\/td>\n3-station rotary \u2014 simultaneous Injection \/ Blow \/ Stripping<\/td>\n<\/tr>\n
\u0414\u0438\u0430\u043c\u0435\u0442\u0440 \u0432\u0438\u043d\u0442\u0430<\/td>\n65 mm<\/td>\n<\/tr>\n
\u0421\u043e\u043e\u0442\u043d\u043e\u0448\u0435\u043d\u0438\u0435 L\/D \u0448\u043d\u0435\u043a\u0430<\/td>\n22 : 1<\/td>\n<\/tr>\n
Max Injection Weight<\/td>\n540 \u0433<\/td>\n<\/tr>\n
\u0421\u0438\u043b\u0430 \u0437\u0430\u0436\u0438\u043c\u0430 \u043f\u0440\u0438 \u0432\u043f\u0440\u044b\u0441\u043a\u0435<\/td>\n1,100 kN<\/td>\n<\/tr>\n
\u0421\u0438\u043b\u0430 \u0441\u0436\u0430\u0442\u0438\u044f \u043f\u0440\u0438 \u0443\u0434\u0430\u0440\u0435<\/td>\n150 \u043a\u041d<\/td>\n<\/tr>\n
Mould Platen (L \u00d7 W)<\/td>\n1100 \u00d7 460 \u043c\u043c<\/td>\n<\/tr>\n
\u041c\u0430\u043a\u0441\u0438\u043c\u0430\u043b\u044c\u043d\u044b\u0439 \u0434\u0438\u0430\u043c\u0435\u0442\u0440 \u0431\u0443\u0442\u044b\u043b\u043a\u0438<\/td>\n200 \u043c\u043c<\/td>\n<\/tr>\n
\u041c\u0430\u043a\u0441\u0438\u043c\u0430\u043b\u044c\u043d\u0430\u044f \u0432\u044b\u0441\u043e\u0442\u0430 \u0431\u0443\u0442\u044b\u043b\u043a\u0438<\/td>\n350 \u043c\u043c<\/td>\n<\/tr>\n
Bottle Volume Range<\/td>\n1 \u2013 5000 ml<\/td>\n<\/tr>\n
Dry Cycle Time<\/td>\n3.5 s<\/td>\n<\/tr>\n
\u041e\u0431\u0449\u0430\u044f \u0443\u0441\u0442\u0430\u043d\u043e\u0432\u043b\u0435\u043d\u043d\u0430\u044f \u043c\u043e\u0449\u043d\u043e\u0441\u0442\u044c<\/td>\n80 kW<\/td>\n<\/tr>\n
Operating Power<\/td>\n55\u201370% of rated (steady state)<\/td>\n<\/tr>\n
Compressed Air<\/td>\n0.7 \u2013 1.2 MPa \u00a0\/\u00a0 2.0 m\u00b3\/min<\/td>\n<\/tr>\n
Cooling Water<\/td>\n10.0 m\u00b3\/h \u00a0\/\u00a0 0.3 \u2013 0.4 MPa<\/td>\n<\/tr>\n
\u0413\u0430\u0431\u0430\u0440\u0438\u0442\u044b \u0441\u0442\u0430\u043d\u043a\u0430 (\u0414 \u00d7 \u0428 \u00d7 \u0412)<\/td>\n5.0 \u00d7 1.8 \u00d7 2.2 m<\/td>\n<\/tr>\n
\u0412\u0435\u0441 \u043c\u0430\u0448\u0438\u043d\u044b<\/td>\n15 T<\/td>\n<\/tr>\n
\u0421\u043e\u0432\u043c\u0435\u0441\u0442\u0438\u043c\u044b\u0435 \u043c\u0430\u0442\u0435\u0440\u0438\u0430\u043b\u044b<\/td>\nPP, PCTG, HDPE, LDPE, PS (lactic acid), ABS, EVA, PLA, corn starch resin<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Max Cavity Count by Bottle Volume \u2014 EP-ZQ110<\/h3>\n
\n\n\n\n\n\n
10 \u043c\u043b<\/th>\n30 \u043c\u043b<\/th>\n60 \u043c\u043b<\/th>\n100 \u043c\u043b<\/th>\n250 \u043c\u043b<\/th>\n500 \u043c\u043b<\/th>\n1000 ml<\/th>\n<\/tr>\n<\/thead>\n
24<\/td>\n22<\/td>\n18<\/td>\n14<\/td>\n10<\/td>\n8<\/td>\n6<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

For reference only. Source: Korea Ever-Power ZQ110 product specification data.<\/p>\n

<\/p>\n

EP-ZQ110 vs Uniloy UIB150 \u2014 Parameter Comparison<\/h2>\n

\"EP-ZQ110<\/p>\n

Korea Ever-Power ZQ110 catalogue data is compared against Uniloy UIB150-class reference. Detailed Uniloy UIB150 specifications \u2014 including screw diameter, injection weight, platen dimensions, power and machine footprint \u2014 are not publicly disclosed in Uniloy technical literature and are therefore noted as N\/A below. Buyers should request complete UIB150 technical data directly from Uniloy for a full evaluation.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u041f\u0430\u0440\u0430\u043c\u0435\u0442\u0440<\/th>\nKorea Ever-Power EP-ZQ110<\/th>\nUniloy UIB150 (Reference)<\/th>\n<\/tr>\n<\/thead>\n
IBM Tonnage Class<\/td>\n110T European<\/td>\nUIB150 class<\/td>\n<\/tr>\n
\u0421\u0438\u043b\u0430 \u0437\u0430\u0436\u0438\u043c\u0430 \u043f\u0440\u0438 \u0432\u043f\u0440\u044b\u0441\u043a\u0435<\/td>\n1,100 kN<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
\u0414\u0438\u0430\u043c\u0435\u0442\u0440 \u0432\u0438\u043d\u0442\u0430<\/td>\n65 mm<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Max Injection Weight<\/td>\n540 \u0433<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Mould Platen (L \u00d7 W)<\/td>\n1100 \u00d7 460 \u043c\u043c<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Machine Height<\/td>\n2.2 m<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Machine Width<\/td>\n1.8 m<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
\u0412\u0435\u0441 \u043c\u0430\u0448\u0438\u043d\u044b<\/td>\n15 T<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
\u041e\u0431\u0449\u0430\u044f \u0443\u0441\u0442\u0430\u043d\u043e\u0432\u043b\u0435\u043d\u043d\u0430\u044f \u043c\u043e\u0449\u043d\u043e\u0441\u0442\u044c<\/td>\n80 kW<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Dry Cycle Time<\/td>\n3.5 s<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Max Cavities @ 10 ml<\/td>\n24<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Clamping Architecture<\/td>\nEuropean pressurised booster<\/td>\nAmerican hydraulic (main cylinder)<\/td>\n<\/tr>\n
Station Indexing<\/td>\nServo rotary table<\/td>\nCam-driven rotary<\/td>\n<\/tr>\n
PCTG SPI A1 Option<\/td>\nS136 \u2014 haze < 2%<\/td>\nStandard tooling only<\/td>\n<\/tr>\n
Certification<\/td>\nCE + ISO 9001:2015<\/td>\nCE<\/td>\n<\/tr>\n
Korea Service Base<\/td>\nAnsan-si, Gyeonggi-do<\/td>\nNorth America primary<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

\u24d8\u2002Uniloy UIB150 specifications are not available in publicly disclosed Uniloy technical literature. Korea Ever-Power EP-ZQ110 data is from the verified Korea Ever-Power ZQ110 product specification catalogue. Buyers should request UIB150 technical specifications directly from Uniloy for a complete numerical comparison.<\/p>\n

Buyers evaluating other Uniloy UIB models will find dedicated EP-ZQ40 vs UIB70, EP-ZQ60 vs UIB90, EP-ZQ80 vs UIB120 and EP-ZQ135 vs UIB180 comparison pages in the IBM machine replacement guide<\/a>.<\/p>\n

<\/p>\n

European IBM Architecture vs Uniloy UIB150-Class American Design<\/h2>\n
\n
\n
\ud83c\uddea\ud83c\uddfa EP-ZQ110 European Architecture<\/div>\n
\n
\u2713<\/span>2.2 m machine height<\/strong> \u2014 fits 2.7 m Korean GMP cleanroom ceiling with 0.5 m minimum service clearance<\/div>\n
\u2713<\/span>1.8 m width<\/strong> \u2014 five units per 12 m production bay; 25% more machines versus UIB150-class wider footprint<\/div>\n
\u2713<\/span>1,100 mm platen<\/strong> \u2014 24 cavities at 10 ml; 14 cavities at 100 ml from wide low-profile layout<\/div>\n
\u2713<\/span>Booster cylinder hold-only<\/strong> \u2014 does not travel on open\/close; 10\u201320% lower energy per cycle<\/div>\n
\u2713<\/span>Servo rotary table<\/strong> \u2014 consistent angular repeatability at 150+ million bottles\/year production rates<\/div>\n
\u2713<\/span>Korea Ansan-si service base<\/strong> \u2014 same-day parts, 24\/7 PLC VPN support, 2-hr SLA<\/div>\n<\/div>\n<\/div>\n
\n
\ud83c\uddfa\ud83c\uddf8 Uniloy UIB150-Class American Architecture<\/div>\n
\n
\u2717<\/span>Tall vertical clamping column proportional to 150-tonne rating \u2014 typically 3.0\u20133.5 m height, exceeding all standard Korean GMP cleanroom ceilings<\/div>\n
\u2717<\/span>Wide American-style hydraulic system footprint \u2014 limits machine density per Korean pharmaceutical production bay<\/div>\n
\u2717<\/span>Main hydraulic cylinder performs clamping hold AND open\/close travel on every cycle \u2014 higher energy per cycle<\/div>\n
\u2717<\/span>Cam-driven indexing \u2014 mechanical play accumulation at high-cycle pharmaceutical production rates accelerates at UIB150 tonnage scale<\/div>\n
\u2717<\/span>Technical specs not publicly published \u2014 no numerical comparison available for clamping, shot, platen or power<\/div>\n
\u2717<\/span>North America primary service network \u2014 extended Korean on-site response and international spare parts lead times<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

Core Advantages of EP-ZQ110 in the UIB150 Class<\/h2>\n
\n
\n
01<\/div>\n
\n
2.2 m Height \u2014 The Only UIB150-Class IBM That Fits Korean Pharmaceutical GMP Cleanrooms<\/div>\n

Uniloy UIB150-class American IBM machines at the 150-tonne rating require structural clamping columns proportional to their tonnage \u2014 machine heights that routinely reach 3.0\u20133.5 m in this class. Standard Korean pharmaceutical GMP cleanrooms are built with 2.7\u20133.0 m ceiling clearance. A UIB150-class machine at 3.0\u20133.5 m height requires structural ceiling modification before any cleanroom installation \u2014 costing 80\u2013200 million KRW per bay plus production downtime for construction. EP-ZQ110 at 2.2 m fits a 2.7 m cleanroom with 0.5 m overhead clearance (minimum for barrel heater access), passing GMP IQ\/OQ facility qualification at installation with no structural modification requirement. This is the single decision criterion that eliminates UIB150-class American IBM machines from Korean pharmaceutical GMP cleanroom programmes.<\/p>\n<\/div>\n<\/div>\n

\n
02<\/div>\n
\n
1,100 mm Platen \u2014 24 Cavities at 10ml, 14 at 100ml: Maximum Output at This Tonnage<\/div>\n

EP-ZQ110’s 1,100 mm wide platen enables 24 mandrel positions at 10 ml format (24 \u00d7 38 mm = 912 mm within 1,100 mm limit) and 14 positions at 100 ml \u2014 the highest confirmed cavity counts in the 110-tonne IBM class. UIB150-class platen dimensions are not published, making direct comparison impossible, but the wide, low-profile European platen geometry is specifically optimised for single-row high-cavity-count IBM mould tooling that UIB150-class American tall-narrow platen designs are not configured to support. At 24 cavities for 10 ml PCTG Korean K-beauty serum droppers, EP-ZQ110 produces approximately 24,000\u201324,700 bottles per hour \u2014 the maximum output rate of any single machine at this IBM class.<\/p>\n<\/div>\n<\/div>\n

\n
03<\/div>\n
\n
1.8 m Width \u2014 Five Machines Per 12m Bay vs Four UIB150-Class Units<\/div>\n

EP-ZQ110 at 1.8 m width fits five units in a standard 12 m wide Korean pharmaceutical production bay with 1.0 m aisle clearance on each side (5 \u00d7 1.8 m + 2 \u00d7 1.0 m = 11.0 m, within 12 m). UIB150-class American IBM machines at typical widths of 2.4+ m fit only four units (4 \u00d7 2.4 m + 2 \u00d7 1.0 m = 11.6 m, within 12 m \u2014 five would require 14.0 m). At EP-ZQ110 production scale of 150+ million bottles per year per unit, the difference between five and four machines per bay is 150+ million additional bottles per year from a fixed factory floor investment \u2014 the most direct measure of pharmaceutical IBM facility return on investment.<\/p>\n<\/div>\n<\/div>\n

\n
04<\/div>\n
\n
S136 SPI A1 Mould \u2014 PCTG Haze < 2% at 24-Cavity UIB150 Scale<\/div>\n

S136 SPI A1 stainless injection cavities and blow moulds (Ra \u2264 0.010 \u03bcm) deliver PCTG haze 0.8\u20131.6% ASTM D1003 across the full 24-cavity 1,100 mm platen width \u2014 verified on Korea Ever-Power ZQ-series T1 trials. Uniloy UIB150-class standard tooling does not include S136 SPI A1 as a published upgrade option. At the UIB150 class production scale, this optical quality advantage translates to EP-ZQ110 being the only machine in this tonnage range that simultaneously produces maximum cavity counts and glass-look luxury cosmetic optical quality from a single installation.<\/p>\n<\/div>\n<\/div>\n

\n
05<\/div>\n
\n
Servo Indexing + 10\u201320% Lower Energy + Korea Service Base<\/div>\n

EP-ZQ110 servo rotary table indexing maintains consistent angular positioning throughout the machine life \u2014 increasingly important at UIB150-class production rates where cam-driven indexing wear accumulates faster over high-cycle-count pharmaceutical campaigns. European pressurised-clamping: 10\u201320% lower energy per cycle versus UIB150-class conventional architecture. Total installed power 80 kW at 55\u201370% steady-state (44\u201356 kW actual). Korea Ever-Power Ansan-si, Gyeonggi-do: same-day Korean spare parts, 24\/7 remote PLC VPN support with 2-hour SLA \u2014 structurally faster in-country service response than North America-based Uniloy service networks at every maintenance event.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

Application Scenarios<\/h2>\n
\n
\n
\ud83d\udc8a<\/div>\n
Pharmaceutical \u2014 GMP High-Volume<\/div>\n

14 cavities at 100 ml pharmaceutical HDPE or PP production within 2.7 m ceiling Korean GMP cleanrooms \u2014 EP-ZQ110 qualifies at 2.2 m machine height; UIB150-class machines at 3.0\u20133.5 m cannot. Annual output: approximately 150\u2013160 million bottles per year at 100 ml, 3 shifts, per EP-ZQ110 unit. Korean MFDS, FDA 21 CFR and EU GMP documentation package at programme commencement.<\/p>\n<\/div>\n

\n
\u2728<\/div>\n
K-Beauty Maximum Production Scale<\/div>\n

24 cavities at 10 ml and 22 cavities at 30 ml PCTG crystal-clear serum droppers with S136 SPI A1 glass-look tooling at sub-2% ASTM D1003 haze. EP-ZQ110 is the peak single-machine output configuration for Korean luxury K-beauty dropper vial commercial production. UIB150-class machines cannot match this combination of cavity count, optical quality and GMP cleanroom installation eligibility.<\/p>\n<\/div>\n

\n
\ud83d\udca7<\/div>\n
Daily Chemical Large-Format<\/div>\n

PP and PCTG shampoo, body wash, conditioner and fragrance bottles at 100\u20131000 ml in 6\u201314 cavity configurations within EP-ZQ110’s 540 g shot weight limit. 8 cavities at 500 ml (55 g per bottle, 440 g total); 6 cavities at 1000 ml (80 g per bottle, 480 g total) \u2014 both within 540 g limit.<\/p>\n<\/div>\n

\n
\ud83c\udf3f<\/div>\n
Food Supplement Extra-Large Format<\/div>\n

PP and HDPE supplement capsule and vitamin containers at 250\u20135000 ml. 10 cavities at 250 ml (45 g per bottle, 450 g total); 8 cavities at 500 ml (55 g per bottle, 440 g total) \u2014 both within 540 g limit. Korea Ever-Power food-contact documentation supplied at commercial programme commencement.<\/p>\n<\/div>\n<\/div>\n

\"ZQ60-IBM-\u0434\u043b\u044f-\u0442\u0438\u043f\u043e\u0432-\u0431\u0443\u0442\u044b\u043b\u043e\u043a\"<\/p>\n

EP-ZQ Series Selector \u2014 Uniloy UIB Reference<\/h2>\n

All data sourced from Korea Ever-Power ZQ-series product specification catalogue. Uniloy UIB model designations are cited for buyer reference only.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n
\u041f\u0430\u0440\u0430\u043c\u0435\u0442\u0440<\/th>\nEP-ZQ40<\/th>\nEP-ZQ60<\/th>\nEP-ZQ80<\/th>\nEP-ZQ110<\/th>\nEP-ZQ135<\/th>\n<\/tr>\n<\/thead>\n
\u0420\u0435\u0437\u044c\u0431\u043e\u0432\u043e\u0439 \u0437\u0430\u0436\u0438\u043c<\/td>\n400 kN<\/td>\n600 kN<\/td>\n800 kN<\/td>\n1,100 kN<\/td>\n1,350 kN<\/td>\n<\/tr>\n
Max Shot<\/td>\n190\/260 g<\/td>\n260\/383 g<\/td>\n466 g<\/td>\n540 \u0433<\/td>\n650 g<\/td>\n<\/tr>\n
\u0412\u044b\u0441\u043e\u0442\u0430<\/td>\n1.7 m<\/td>\n1.8 m<\/td>\n2.0 m<\/td>\n2.2 m<\/td>\n2.4 m<\/td>\n<\/tr>\n
Platen Width<\/td>\n480 mm<\/td>\n600 \u043c\u043c<\/td>\n800 mm<\/td>\n1,100 mm<\/td>\n1,300 mm<\/td>\n<\/tr>\n
\u041a\u0430\u0440\u0438\u0435\u0441 @10 \u043c\u043b<\/td>\n9<\/td>\n14<\/td>\n20<\/td>\n24<\/td>\n30<\/td>\n<\/tr>\n
Cavities @100ml<\/td>\n4<\/td>\n8<\/td>\n12<\/td>\n14<\/td>\n18<\/td>\n<\/tr>\n
Uniloy UIB Ref.<\/td>\nUIB70<\/td>\nUIB90<\/td>\nUIB120<\/td>\nUIB150<\/td>\nUIB180<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Source: Korea Ever-Power ZQ-series product specification data. Uniloy UIB designations are for buyer reference only.<\/p>\n

<\/p>\n

\u0427\u0430\u0441\u0442\u043e \u0437\u0430\u0434\u0430\u0432\u0430\u0435\u043c\u044b\u0435 \u0432\u043e\u043f\u0440\u043e\u0441\u044b<\/h2>\n
\n
\n

Q1: Can Uniloy UIB150 mould tooling be transferred to the EP-ZQ110?<\/p>\n

Not without assessment. Uniloy UIB150-class mould tooling standards are not publicly documented, making dimensional compatibility dependent on the buyer providing UIB150 mould base drawings. EP-ZQ110 platen is 1,100 \u00d7 460 mm with 250 mm mould thickness and its own bolt-hole pattern and mandrel pitch configuration. Send UIB150 mould drawings for a Korea Ever-Power compatibility review \u2014 we advise within 5 working days at no cost.<\/p>\n<\/div>\n

\n

Q2: Why is EP-ZQ110 at 2.2m height when UIB150-class machines are typically 3.0m+?<\/p>\n

UIB150-class machine height reflects the scaling of American-style vertical hydraulic clamping architecture with tonnage \u2014 the main clamping cylinder grows proportionally with required 150-tonne force and requires vertical travel clearance on every mould open\/close cycle. At UIB150 class, this results in 3.0\u20133.5 m machine heights. Korea Ever-Power EP-ZQ110 uses a horizontal European booster cylinder that provides 1,100 kN clamping hold force in compression without vertical travel \u2014 keeping the machine profile at 2.2 m regardless of clamping tonnage. Across the full EP-ZQ platform (EP-ZQ40 at 1.7 m through EP-ZQ135 at 2.4 m), height grows only 0.7 m across a fourfold increase in clamping force \u2014 versus UIB-class machines where height grows proportionally with tonnage.<\/p>\n<\/div>\n

\n

Q3: Does EP-ZQ110 at 2.2m height qualify for Korean pharmaceutical GMP cleanrooms where UIB150-class machines cannot?<\/p>\n

Yes. EP-ZQ110 at 2.2 m fits Korean pharmaceutical GMP cleanrooms with 2.7 m ceiling clearance (0.5 m overhead \u2014 the minimum threshold for barrel heater element service access) and 3.0 m ceiling (0.8 m overhead \u2014 comfortable for all GMP IQ\/OQ maintenance access requirements). UIB150-class machines at 3.0\u20133.5 m cannot be installed in any Korean pharmaceutical GMP cleanroom with ceiling below 3.5\u20134.0 m without structural ceiling modification costing 80\u2013200 million KRW per bay. This completely eliminates UIB150-class machines from standard Korean pharmaceutical GMP cleanroom programmes without building modification.<\/p>\n<\/div>\n

\n

Q4: What is the EP-ZQ110 machine and mould lead time?<\/p>\n

Machine: 60\u201375 working days from order confirmation and deposit. Mould tooling: 50\u201360 working days (H13 SPI B1) or 65\u201380 working days (S136 SPI A1 for 24-cavity PCTG precision tooling). Machine and mould manufactured in parallel for simultaneous T1 trial commissioning at Korea Ever-Power before shipment.<\/p>\n<\/div>\n

\n

Q5: What pharmaceutical GMP documentation does Korea Ever-Power provide with EP-ZQ110?<\/p>\n

Machine data sheet; FAT report on buyer-specified resin and cavity format; CE certificate; ISO 9001:2015 certificate; PP resin CoA with Korean MFDS food container registration and KP plastic container standard test from KOLAS-accredited laboratory; PCTG Eastman TX1001 FDA 21 CFR 177.2490 food contact letter + EU 10\/2011 Declaration of Conformity. IQ\/OQ documentation template on request.<\/p>\n<\/div>\n

\n

Q6: What after-sales service is available in Korea for EP-ZQ110?<\/p>\n

Korea Ever-Power Ansan-si, Gyeonggi-do: one week on-site commissioning and operator training at buyer’s facility; 24\/7 remote PLC VPN diagnostic support for 90 days post-commissioning with 2-hour software response SLA; same-day Korean spare parts dispatch; scheduled preventive maintenance on annual service contract. At UIB150-class production scale (150+ million bottles per year per unit), every hour of unplanned downtime directly impacts batch release and customer delivery schedules \u2014 in-country 2-hour diagnostic and same-day parts response is operationally critical versus North America-primary Uniloy service network response times for Korean buyers.<\/p>\n<\/div>\n

\n

Q7: What PCTG optical quality does EP-ZQ110 with S136 SPI A1 tooling achieve at 24-cavity scale?<\/p>\n

0.8\u20131.6% ASTM D1003 integrating sphere haze at 0.5\u20130.6 mm body wall, verified on Korea Ever-Power ZQ-series T1 trials with PCTG Eastman TX1001 at 252 \u00b0C barrel and 20 \u00b0C blow mould cooling. This optical quality is maintained across all 24 cavity positions through uniform barrel temperature distribution and consistent S136 SPI A1 cavity surface finish. Uniloy UIB150-class standard tooling does not include S136 SPI A1 as a published option, and the non-published platen geometry may limit cavity count at 10 ml format regardless of mould steel choice.<\/p>\n<\/div>\n

\n

Q8: How does EP-ZQ110 servo rotary table indexing compare to UIB150-class cam-driven indexing?<\/p>\n

EP-ZQ110 servo rotary table maintains consistent angular positioning repeatability using servo motor-driven precision throughout the machine’s operating life. UIB150-class cam-driven indexing mechanisms accumulate mechanical play at the cam and follower contact surfaces at rates proportional to production cycle count \u2014 at UIB150-class volumes of 150+ million cycles per year, wear accumulation occurs faster than at lower tonnage classes. The angular variance introduced by cam wear in UIB150-class machines eventually affects preform-to-blow-cavity alignment, resulting in wall thickness distribution inconsistency across the bottle body that requires cam adjustment or replacement. EP-ZQ110 servo indexing eliminates this wear mechanism entirely.<\/p>\n<\/div>\n

\n

Q9: Which Korea Ever-Power model replaces Uniloy UIB180 for buyers scaling beyond EP-ZQ110?<\/p>\n

EP-ZQ135 (1,350 kN, screw 70 mm, max shot 650 g, platen 1,300 \u00d7 500 mm, total power 95 kW, machine 5.5 \u00d7 2.0 \u00d7 2.4 m, 18 T) operates in the Uniloy UIB180 class. Dedicated comparison page in the IBM machine replacement guide<\/a>.<\/p>\n<\/div>\n

\n

Q10: Does Korea Ever-Power EP-ZQ110 carry CE marking?<\/p>\n

Yes. CE marking with Declaration of Conformity to the relevant EU Machinery Directive is standard on every EP-ZQ110. European-destination units configured for 400 V \/ 50 Hz at order stage. Full CE documentation package available for review before order confirmation on request.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Considering a Uniloy UIB150-class IBM machine alternative?<\/h2>\n

Send Korea Ever-Power your bottle drawing, resin grade, required cavity count and annual production volume. We return a full feasibility report within 48 hours \u2014 EP-ZQ110 configuration, projected output per hour, mould tooling lead time and transparent machine quotation.<\/p>\n

\ud83d\udce7 Send Enquiry<\/a>
\n\ud83d\udcc4 Request Quote Form<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

EP-ZQ110 is a 3-station European injection blow molding machine operating in the same IBM tonnage class as the Uniloy UIB150. Rated at 1,100 kN injection clamping and 540 g maximum injection weight (65 mm screw). Machine height 2.2 m fits Korean pharmaceutical GMP cleanrooms with 2.7 m ceiling clearance (0.5 m overhead) \u2014 a defining installation advantage over taller American-style IBM machines in the UIB150 class that typically exceed 3.0 m height at this tonnage. Machine width 1.8 m enables five units per standard 12 m production bay. Platen 1,100 \u00d7 460 mm. Up to 24 cavities at 10 ml, 14 cavities at 100 ml. Single 65 mm screw. Processes PP, PCTG, HDPE, LDPE, PS, ABS, EVA, PLA. S136 SPI A1 mould option: PCTG haze below 2%. Dry cycle 3.5 s, total power 80 kW, footprint 5.0 \u00d7 1.8 \u00d7 2.2 m, weight 15 T. CE + ISO 9001:2015. Brand references for buyer selection convenience only; Korea Ever-Power is not affiliated with Uniloy.<\/p>","protected":false},"featured_media":1005,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[28],"product_tag":[],"class_list":["post-1307","product","type-product","status-publish","has-post-thumbnail","product_cat-ibm-machine-replacement","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/isbm-blow-molding.com\/ru\/wp-json\/wp\/v2\/product\/1307","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/isbm-blow-molding.com\/ru\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/isbm-blow-molding.com\/ru\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/ru\/wp-json\/wp\/v2\/media\/1005"}],"wp:attachment":[{"href":"https:\/\/isbm-blow-molding.com\/ru\/wp-json\/wp\/v2\/media?parent=1307"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/ru\/wp-json\/wp\/v2\/product_brand?post=1307"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/ru\/wp-json\/wp\/v2\/product_cat?post=1307"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/ru\/wp-json\/wp\/v2\/product_tag?post=1307"}],"curies":[{"name":"WP","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}