{"id":852,"date":"2026-05-14T06:39:57","date_gmt":"2026-05-14T06:39:57","guid":{"rendered":"https:\/\/isbm-blow-molding.com\/?p=852"},"modified":"2026-05-14T06:39:57","modified_gmt":"2026-05-14T06:39:57","slug":"isbm-mould-cooling-channel-engineering-korean-guide","status":"publish","type":"post","link":"https:\/\/isbm-blow-molding.com\/ru\/isbm-mould-cooling-channel-engineering-korean-guide\/","title":{"rendered":"ISBM Mould Cooling Channel Engineering: Korean Guide"},"content":{"rendered":"

<\/p>\n

\n
\n

Technical Deep Dive \u00b7 Mould Engineering \u00b7 Korean ISBM 2026<\/p>\n

ISBM Mould Cooling Channel
\nEngineering: Korean Guide<\/h1>\n

Cooling time accounts for 35\u201355% of every Korean ISBM cycle. The difference between a well-engineered cooling channel layout and a generic one is 1.5\u20133.5 seconds per cycle \u2014 which at 8-cavity, 16-hour shifts translates to KRW 40\u201395M additional annual revenue on the same machine and mould. This guide gives Korean producers the engineering basis to capture that difference.<\/p>\n

35\u201355% of Cycle Is Cooling<\/span>
\nChannel Depth: 8\u201312mm Rule<\/span>
\n10\u00b0C Water = \u22121.8s Cycle<\/span><\/div>\n

Korean Ever-Power Engineering Desk \u00b7 Ansan-si \u00b7 May 2026<\/p>\n<\/div>\n<\/header>\n

 <\/p>\n

<\/p>\n

\n

Korean ISBM Cooling Channel Design Reference \u2014 2026<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n
\u041f\u0430\u0440\u0430\u043c\u0435\u0442\u0440<\/th>\n\u0421\u0442\u0430\u043d\u0434\u0430\u0440\u0442\u043d\u044b\u0439 \u041f\u042d\u0422<\/th>\nPETG \/ K-Beauty<\/th>\nPP Hot-Fill<\/th>\nEngineering Reason<\/th>\n<\/tr>\n<\/thead>\n
Channel diameter<\/td>\n8\u201310mm<\/td>\n8\u201310mm<\/td>\n10\u201312mm<\/td>\nLarger diameter for PP: compensates for lower thermal conductivity of H13 steel used in hot-fill moulds<\/td>\n<\/tr>\n
Depth from cavity (d)<\/td>\n8\u201312mm<\/td>\n8\u201310mm<\/td>\n12\u201316mm<\/td>\nCloser to cavity = faster heat extraction; PETG closer for optical clarity; PP further to avoid over-cooling crystallinity<\/td>\n<\/tr>\n
Channel pitch (p)<\/td>\n2\u20132.5d<\/td>\n1.8\u20132.2d<\/td>\n2\u20133d<\/td>\nPitch as multiple of channel depth; tighter pitch for PETG to ensure uniform surface temperature<\/td>\n<\/tr>\n
Water inlet temperature<\/td>\n8\u201312\u00b0C<\/td>\n8\u201312\u00b0C<\/td>\n10\u201325\u00b0C<\/td>\nPP: higher water temperature prevents over-rapid crystallinity quench; PET\/PETG: cold water maximises heat extraction rate<\/td>\n<\/tr>\n
Flow rate target<\/td>\nRe > 10,000<\/td>\nRe > 10,000<\/td>\nRe > 8,000<\/td>\nTurbulent flow (Re > 4,000) is essential; Re > 10,000 ensures 3\u20134\u00d7 higher heat transfer coefficient than laminar flow<\/td>\n<\/tr>\n
Inlet-outlet \u0394T max<\/td>\n\u2264 3\u00b0C<\/td>\n\u2264 2\u00b0C<\/td>\n\u2264 4\u00b0C<\/td>\nLarge \u0394T = non-uniform cavity cooling = wall thickness variation; PETG tighter for optical quality<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n

<\/p>\n