{"id":1305,"date":"2026-07-21T05:26:20","date_gmt":"2026-07-21T05:26:20","guid":{"rendered":"https:\/\/isbm-blow-molding.com\/?post_type=product&p=1305"},"modified":"2026-07-21T05:26:20","modified_gmt":"2026-07-21T05:26:20","slug":"ep-zq135-ibm-machine-replacement-for-jomar-ibm175","status":"publish","type":"product","link":"https:\/\/isbm-blow-molding.com\/pt\/product\/ep-zq135-ibm-machine-replacement-for-jomar-ibm175\/","title":{"rendered":"M\u00e1quina IBM EP-ZQ135 \u2014 Substituta da Jomar IBM175"},"content":{"rendered":"
\n
\n

<\/p>\n

Selection Reference Notice:<\/strong> “Jomar” and “IBM175” are trademarks of Jomar Corporation (USA), referenced solely to help buyers identify the Korea Ever-Power EP-ZQ135 as a comparable alternative. Korea Ever-Power does not manufacture, distribute or represent Jomar products. All technical data below refers exclusively to the Korea Ever-Power EP-ZQ135.<\/div>\n

<\/p>\n

Vis\u00e3o geral do produto<\/h2>\n

O Korea Ever-Power EP-ZQ135<\/a><\/strong> is the top-range 3-station European IBM machine, positioned as the direct alternative to the Jomar IBM175 in the 135-to-175-tonne IBM class. The comparison reveals the complete divergence of European and American IBM architecture at the top of the tonnage range.<\/p>\n

On shot weight, EP-ZQ135 leads despite the same 70 mm screw: 650 g<\/strong> versus IBM175-class maximum of 550 g at 65 mm (or 450 g at 65 mm) \u2014 100 g more maximum injection weight at the same screw diameter, reflecting EP-ZQ135’s 22:1 L\/D barrel design versus IBM175-class shorter injection stroke configuration. Jomar IBM175 holds the clamping advantage at 1,560 kN versus EP-ZQ135’s 1,350 kN (16% higher), though both machines operate in the same tonnage class and application range.<\/p>\n

\"M\u00e1quina<\/p>\n

The platen geometry divergence is the most dramatic in this comparison series. EP-ZQ135 platen at 1,300 \u00d7 500 mm<\/strong> versus IBM175-class at 635 \u00d7 1,372 mm<\/strong> \u2014 EP-ZQ135 platen is 665 mm wider and 872 mm shorter. These are not different sizes of the same geometry; they are fundamentally different shapes produced by fundamentally different IBM architectures. The wide, low-profile EP-ZQ135 platen enables 30 cavities at 10 ml<\/strong> e 18 cavities at 100 ml<\/strong>. IBM175-class narrow, tall platen geometry at 635 mm width is structurally constrained to approximately 16 positions at 10 ml format regardless of shot weight capacity.<\/p>\n

Machine height at 2.4 m<\/strong> versus IBM175-class 3.58 m<\/strong> (33% lower) is the installation threshold: IBM175-class at 3.58 m cannot be installed in any standard Korean facility without purpose-built structural provisions. EP-ZQ135 at 2.4 m fits industrial production environments with standard 3.0 m ceiling with 0.6 m overhead clearance. Explore the full m\u00e1quina de moldagem por inje\u00e7\u00e3o e sopro<\/a> range for all Korea Ever-Power IBM platforms.<\/p>\n

<\/p>\n

\n
\n
EP-ZQ135 LEADS<\/div>\n
650 g<\/div>\n
Max Shot (70mm)
\nvs IBM175 550g (+18%)<\/span><\/div>\n<\/div>\n
\n
EP-ZQ135 LEADS<\/div>\n
1,300 mm<\/div>\n
Platen Width
\nvs IBM175 635mm (+105%)<\/span><\/div>\n<\/div>\n
\n
EP-ZQ135 LEADS<\/div>\n
2.4 m<\/div>\n
Altura
\nvs IBM175 3.58m (\u221233%)<\/span><\/div>\n<\/div>\n
\n
EP-ZQ135 LEADS<\/div>\n
2.0 m<\/div>\n
Width
\nvs IBM175 2.67m (\u221225%)<\/span><\/div>\n<\/div>\n
\n
EP-ZQ135 LEADS<\/div>\n
30<\/div>\n
Cavities @ 10ml
\n18 @ 100ml<\/span><\/div>\n<\/div>\n
\n
IBM175 LEADS<\/div>\n
1,560 kN<\/div>\n
Clamp
\nvs EP 1,350 kN (+16%)<\/span><\/div>\n<\/div>\n<\/div>\n

<\/p>\n

Especifica\u00e7\u00f5es t\u00e9cnicas<\/h2>\n

\"EP-ZQ135<\/p>\n

All parameters sourced from Korea Ever-Power ZQ135 product specification data.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Par\u00e2metro<\/th>\nEP-ZQ135 Value<\/th>\n<\/tr>\n<\/thead>\n
Layout da m\u00e1quina<\/td>\n3-station rotary \u2014 simultaneous Injection \/ Blow \/ Stripping<\/td>\n<\/tr>\n
Di\u00e2metro do parafuso<\/td>\n70 mm<\/td>\n<\/tr>\n
Rela\u00e7\u00e3o L\/D da rosca<\/td>\n22 : 1<\/td>\n<\/tr>\n
Max Injection Weight<\/td>\n650 g<\/td>\n<\/tr>\n
For\u00e7a de fechamento da inje\u00e7\u00e3o<\/td>\n1,350 kN<\/td>\n<\/tr>\n
For\u00e7a de aperto por sopro<\/td>\n180 kN<\/td>\n<\/tr>\n
Mould Platen (L \u00d7 W)<\/td>\n1,300 \u00d7 500 mm<\/td>\n<\/tr>\n
Di\u00e2metro m\u00e1ximo da garrafa<\/td>\n220 mm<\/td>\n<\/tr>\n
Altura m\u00e1xima da garrafa<\/td>\n380 mm<\/td>\n<\/tr>\n
Bottle Volume Range<\/td>\n1 \u2013 6000 ml<\/td>\n<\/tr>\n
Dry Cycle Time<\/td>\n3.5 s<\/td>\n<\/tr>\n
Pot\u00eancia Total Instalada<\/td>\n95 kW<\/td>\n<\/tr>\n
Operating Power<\/td>\n55\u201370% of rated (steady state)<\/td>\n<\/tr>\n
Compressed Air<\/td>\n0.7 \u2013 1.2 MPa \u00a0\/\u00a0 2.5 m\u00b3\/min<\/td>\n<\/tr>\n
Cooling Water<\/td>\n12.0 m\u00b3\/h \u00a0\/\u00a0 0.3 \u2013 0.4 MPa<\/td>\n<\/tr>\n
Dimens\u00f5es da m\u00e1quina (C \u00d7 L \u00d7 A)<\/td>\n5.5 \u00d7 2.0 \u00d7 2.4 m<\/td>\n<\/tr>\n
Peso da m\u00e1quina<\/td>\n18 T<\/td>\n<\/tr>\n
Materiais Compat\u00edveis<\/td>\nPP, PCTG, HDPE, LDPE, PS (lactic acid), ABS, EVA, PLA, corn starch resin<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Max Cavity Count by Bottle Volume \u2014 EP-ZQ135<\/h3>\n
\n\n\n\n\n\n
10 ml<\/th>\n30 ml<\/th>\n60 ml<\/th>\n100 ml<\/th>\n250 ml<\/th>\n500 ml<\/th>\n1000 ml<\/th>\n<\/tr>\n<\/thead>\n
30<\/td>\n26<\/td>\n22<\/td>\n18<\/td>\n14<\/td>\n10<\/td>\n8<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

For reference only. Source: Korea Ever-Power ZQ135 product specification data.<\/p>\n

<\/p>\n

EP-ZQ135 vs Jomar IBM175 \u2014 Parameter Comparison<\/h2>\n

\"EP-ZQ135<\/p>\n

Korea Ever-Power ZQ135 catalogue data versus Jomar IBM175-class reference figures from publicly available Jomar technical literature and the Korea Ever-Power IBM competitor analysis report. Jomar data cited for buyer selection convenience only.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Par\u00e2metro<\/th>\nEP-ZQ135<\/th>\nJomar IBM175 (Ref.)<\/th>\nDifference<\/th>\n<\/tr>\n<\/thead>\n
Injection Clamp Force<\/td>\n1,350 kN<\/td>\n1,560 kN<\/td>\nIBM175 +16%<\/td>\n<\/tr>\n
Di\u00e2metro do parafuso<\/td>\n70 mm<\/td>\n70 mm<\/td>\nEqual<\/td>\n<\/tr>\n
Max Injection Weight<\/td>\n650 g<\/td>\n450 \/ 550 g<\/td>\n+18% (650 vs 550)<\/td>\n<\/tr>\n
Mould Platen (L \u00d7 W)<\/td>\n1,300 \u00d7 500 mm<\/td>\n635 \u00d7 1,372 mm<\/td>\n+105% wider<\/td>\n<\/tr>\n
Machine Length<\/td>\n5.5 m<\/td>\n4.22 m<\/td>\nIBM175 shorter<\/td>\n<\/tr>\n
Machine Width<\/td>\n2.0 m<\/td>\n2.67 m<\/td>\n\u221225%<\/td>\n<\/tr>\n
Machine Height<\/td>\n2.4 m<\/td>\n3.58 m<\/td>\n\u221233%<\/td>\n<\/tr>\n
Peso da m\u00e1quina<\/td>\n18 T<\/td>\n\u2014 (not published)<\/td>\n\u2014<\/td>\n<\/tr>\n
Pot\u00eancia Total Instalada<\/td>\n95 kW<\/td>\n\u2014 (not published)<\/td>\n10\u201320% less\/cycle<\/td>\n<\/tr>\n
Cavities @ 10 ml<\/td>\n30<\/td>\n~16 (est. 635mm platen)<\/td>\n+14 cavities<\/td>\n<\/tr>\n
Cavities @ 100 ml<\/td>\n18<\/td>\n~9 (est. 635mm platen)<\/td>\n+9 cavities<\/td>\n<\/tr>\n
PCTG SPI A1 Option<\/td>\nS136 \u2014 haze < 2%<\/td>\nStandard tooling<\/td>\nLuxury grade<\/td>\n<\/tr>\n
Certification<\/td>\nCE + ISO 9001:2015<\/td>\nCE<\/td>\nEqual<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

\u24d8\u2002IBM175 cavity counts at 10 ml and 100 ml are Korea Ever-Power estimates based on the published IBM175 platen width of 635 mm. IBM175-class actual cavity count data is not published by Jomar. Buyers should request cavity count data directly from Jomar Corporation for verification.<\/p>\n

Buyers comparing other Jomar IBM models will find dedicated pages for EP-ZQ40 vs IBM40, EP-ZQ60 vs IBM65, EP-ZQ80 vs IBM85S and EP-ZQ110 vs IBM135 in the IBM machine replacement guide<\/a>.<\/p>\n

<\/p>\n

Why EP-ZQ135 Over Jomar IBM175<\/h2>\n
\n
\n
\ud83d\udd25 1,300mm Platen \u2014 30 Cavities at 10ml vs IBM175 ~16<\/div>\n

EP-ZQ135’s 1,300 mm wide platen is more than double IBM175-class’s 635 mm. At 10 ml format with 38 mm mandrel pitch: EP-ZQ135 accommodates 30 mandrel positions (30 \u00d7 38 mm = 1,140 mm, within 1,300 mm); IBM175-class at 635 mm accommodates approximately 16 positions (16 \u00d7 38 mm = 608 mm). Korea Ever-Power ZQ135 specification confirms 30 cavities at 10 ml. IBM175-class cavity count is not published \u2014 Korea Ever-Power estimates approximately 16 based on the 635 mm published platen width. The 14-cavity difference at 10 ml (30 vs 16) from the platen width geometry difference computes to approximately 30 million additional PCTG eye serum dropper vials per year per EP-ZQ135 unit versus IBM175-class at equal capital investment and energy cost.<\/p>\n<\/div>\n

\n
\ud83d\udcc8 650 g Shot Weight \u2014 18% Above IBM175 Maximum at Equal 70mm Screw<\/div>\n

Both EP-ZQ135 and IBM175-class use a 70 mm screw \u2014 yet EP-ZQ135 reaches 650 g versus IBM175-class maximum of 550 g at 70 mm. This 18% shot weight advantage at identical screw diameter reflects EP-ZQ135’s 22:1 L\/D barrel design with extended injection stroke versus IBM175-class barrel configuration. At 18 cavities for 100 ml pharmaceutical HDPE production at 35 g per preform: EP-ZQ135 at 650 g runs 18 cavities (630 g, within limit with 20 g headroom); IBM175-class at 550 g is limited to 15 cavities (525 g, within limit) \u2014 EP-ZQ135 provides 3 additional cavities, a 20% output increase per cycle at equal energy and cycle time.<\/p>\n<\/div>\n

\n
\ud83c\udfd7 33% Shorter \u2014 2.4m vs IBM175 3.58m<\/div>\n

Jomar IBM175-class at 3.58 m height cannot be installed in any standard Korean industrial facility with ceiling below 4.08 m (3.58 m machine + 0.5 m minimum service clearance). Standard Korean industrial building clear height is typically 5.0\u20138.0 m, so the IBM175-class is not physically blocked by ceiling \u2014 but it requires purpose-built elevated machinery bays or mezzanine-level installation at Korean pharmaceutical and daily chemical production plants where standard bay heights may be 4.0\u20135.5 m. EP-ZQ135 at 2.4 m fits any standard Korean industrial bay with 3.0 m+ clear height with 0.6+ m overhead clearance. For Korean pharmaceutical GMP cleanroom buyers specifically, EP-ZQ135 at 2.4 m is the only machine in this IBM class that qualifies for cleanrooms with 3.0 m ceiling without modification.<\/p>\n<\/div>\n

\n
\ud83d\udcc7 25% Narrower Width + S136 SPI A1 Mould<\/div>\n

EP-ZQ135 at 2.0 m width versus IBM175-class at 2.67 m (25% narrower) enables higher machine density per Korean pharmaceutical production bay at this top-range IBM class. S136 SPI A1 injection cavities and blow moulds (Ra \u2264 0.010 \u03bcm) deliver PCTG haze 0.8\u20131.6% ASTM D1003 across all 30 cavity positions at 10 ml format \u2014 verified on Korea Ever-Power ZQ-series T1 trials. IBM175-class standard tooling does not include S136 SPI A1. At 30 cavities for 10 ml PCTG eye serum droppers with S136 SPI A1 tooling, EP-ZQ135 produces approximately 30,000\u201330,900 crystal-clear luxury-grade bottles per hour \u2014 the highest output rate of any single IBM machine in this entire product comparison series.<\/p>\n<\/div>\n

\n
\u26a1 10\u201320% Lower Energy + Korea Service Base<\/div>\n

European pressurised-clamping: 10\u201320% lower energy per cycle versus IBM175-class American hydraulic architecture at equal clamping tonnage class. Total installed power 95 kW at 55\u201370% steady-state utilisation (52\u201367 kW actual consumption at pharmaceutical PP production). Korea Ever-Power Ansan-si, Gyeonggi-do service base: same-day Korean spare parts dispatch and 24\/7 remote PLC VPN diagnostic support with 2-hour software SLA. At IBM175-class production volumes \u2014 the highest single-machine IBM output tier \u2014 service response time directly determines production uptime and annual output versus annual target.<\/p>\n<\/div>\n

\n
IBM175 Advantage: 1,560 kN Clamping \u2014 Context and Impact<\/div>\n

IBM175-class holds 1,560 kN injection clamping, 16% above EP-ZQ135’s 1,350 kN. At 18 cavities for 100 ml pharmaceutical HDPE production: EP-ZQ135 at 1,350 kN distributes 75 kN per injection cavity \u2014 within the 50\u201380 kN per cavity typical requirement for pharmaceutical PP and HDPE IBM bottle neck thread dimensional compliance at \u00b10.05 mm tolerance. IBM175-class at 1,560 kN at the same 18 cavities would distribute 86.7 kN per cavity. The practical advantage of IBM175-class clamping over EP-ZQ135 is marginal at standard pharmaceutical IBM cavity counts, and is substantially outweighed by EP-ZQ135’s platen width, shot weight, height, width and optical quality advantages in every standard pharmaceutical and cosmetic IBM application scenario.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Application Scenarios<\/h2>\n

\"EP-ZQ135<\/p>\n

\n
\n
\ud83d\udc8a Pharmaceutical \u2014 Maximum Single-Machine IBM Volume<\/div>\n

18 cavities at 100 ml pharmaceutical HDPE tablet or PP syrup bottles \u2014 the highest cavity count available in the 135-tonne IBM class. At 35 g per preform \u00d7 18 cavities = 630 g, within EP-ZQ135’s 650 g limit with 20 g headroom. IBM175-class at 550 g maximum and 635 mm narrow platen can run approximately 15 cavities at 100 ml (525 g within limit) \u2014 EP-ZQ135 provides 3 additional cavities per cycle, approximately 18% more annual output from the same energy and factory space. Korean MFDS, FDA 21 CFR and EU GMP documentation at programme commencement.<\/p>\n<\/div>\n

\n
\u2728 K-Beauty \u2014 30-Cavity Maximum Scale, Glass-Look PCTG<\/div>\n

30 cavities at 10 ml PCTG eye serum droppers and 26 cavities at 30 ml PCTG facial serum vials with S136 SPI A1 tooling at 0.8\u20131.6% ASTM D1003 haze. EP-ZQ135 at 30 cavities for 10 ml is the single highest-output IBM machine configuration in this entire product line \u2014 approximately 30,000\u201330,900 crystal-clear bottles per hour at full commercial K-beauty dropper vial scale. IBM175-class at 635 mm platen is estimated at approximately 16 cavities at 10 ml \u2014 half the EP-ZQ135 output per machine.<\/p>\n<\/div>\n

\n
\ud83d\udca7 Daily Chemical \u2014 High-Volume PP and PCTG Extra-Large Format<\/div>\n

PP shampoo, body wash and conditioner at 250\u20131000 ml in 8\u201314 cavity configurations. At 650 g shot weight: 10 cavities at 500 ml PP shampoo (60 g per bottle, 600 g total within 650 g); 8 cavities at 1000 ml PP conditioner (75 g per bottle, 600 g within 650 g). IBM175-class at 550 g maximum: 9 cavities at 500 ml (540 g within limit); 7 cavities at 1000 ml (525 g within limit). EP-ZQ135 provides one additional cavity at both these large-format daily chemical applications.<\/p>\n<\/div>\n

\n
\ud83c\udf3f Food Supplement Club-Pack and Large Institutional Format<\/div>\n

PP and HDPE supplement capsule and vitamin containers at 250\u20136000 ml. 14 cavities at 250 ml (45 g per bottle, 630 g within 650 g); 10 cavities at 500 ml (60 g, 600 g within limit); 8 cavities at 1000 ml (75 g, 600 g within limit). Korea Ever-Power food-contact documentation (Korean MFDS, FDA 21 CFR 177.1520, EU 10\/2011) supplied at commercial programme commencement.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

EP-ZQ Series Selector<\/h2>\n

All data sourced from Korea Ever-Power ZQ-series product specification catalogue. Jomar model designations are cited for buyer reference only.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Par\u00e2metro<\/th>\nEP-ZQ40<\/th>\nEP-ZQ60<\/th>\nEP-ZQ80<\/th>\nEP-ZQ110<\/th>\nEP-ZQ135<\/th>\n<\/tr>\n<\/thead>\n
Grampo de inje\u00e7\u00e3o<\/td>\n400 kN<\/td>\n600 kN<\/td>\n800 kN<\/td>\n1,100 kN<\/td>\n1,350 kN<\/td>\n<\/tr>\n
Max Shot<\/td>\n190\/260 g<\/td>\n260\/383 g<\/td>\n466 g<\/td>\n540 g<\/td>\n650 g<\/td>\n<\/tr>\n
Screw<\/td>\n40\/45 mm<\/td>\n45\/50 mm<\/td>\n55 mm<\/td>\n65 mm<\/td>\n70 mm<\/td>\n<\/tr>\n
Altura<\/td>\n1.7 m<\/td>\n1.8 m<\/td>\n2.0 m<\/td>\n2.2 m<\/td>\n2.4 m<\/td>\n<\/tr>\n
Platen Width<\/td>\n480 mm<\/td>\n600 mm<\/td>\n800 mm<\/td>\n1,100 mm<\/td>\n1,300 mm<\/td>\n<\/tr>\n
C\u00e1ries @10ml<\/td>\n9<\/td>\n14<\/td>\n20<\/td>\n24<\/td>\n30<\/td>\n<\/tr>\n
Cavities @100ml<\/td>\n4<\/td>\n8<\/td>\n12<\/td>\n14<\/td>\n18<\/td>\n<\/tr>\n
Pot\u00eancia Total<\/td>\n20 kW<\/td>\n37 kW<\/td>\n55 kW<\/td>\n80 kW<\/td>\n95 kW<\/td>\n<\/tr>\n
Jomar Equivalent<\/td>\nIBM40<\/td>\nIBM65<\/td>\nIBM85S<\/td>\nIBM135<\/td>\nIBM175<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Source: Korea Ever-Power ZQ-series product specification data. Jomar designations are for buyer reference only.<\/p>\n

<\/p>\n

Perguntas frequentes<\/h2>\n
\n
\n

Q1: Can Jomar IBM175 mould tooling be used on the EP-ZQ135?<\/p>\n

Not without major adaptation. IBM175-class platen (635 \u00d7 1,372 mm) is a tall, narrow geometry versus EP-ZQ135’s wide, low-profile 1,300 \u00d7 500 mm platen \u2014 the platen aspect ratios are inverted. IBM175-class tooling mandrel pitch, mould thickness and bolt-hole configuration are designed for a vertically oriented platen that is fundamentally incompatible with EP-ZQ135’s horizontal platen. New mould tooling must be designed to the EP-ZQ135 1,300 \u00d7 500 mm platen specification. Send IBM175 mould base drawings for a Korea Ever-Power assessment within 5 working days at no cost.<\/p>\n<\/div>\n

\n

Q2: Both EP-ZQ135 and IBM175 use a 70mm screw \u2014 how does EP-ZQ135 achieve 650g vs IBM175’s 550g?<\/p>\n

At equal 70 mm screw diameter, injection weight is determined by barrel L\/D ratio and effective injection stroke. Korea Ever-Power EP-ZQ135 barrel L\/D is 22:1 with an injection stroke calibrated for 650 g. IBM175-class at 70 mm achieves 550 g \u2014 indicating a shorter effective injection stroke in the IBM175-class barrel design. The 18% shot weight advantage EP-ZQ135 holds over IBM175-class at equal screw diameter is a barrel design difference. This is the same pattern observed across the ZQ series: EP-ZQ80 achieves 466 g at 55 mm versus IBM85S 300 g at 55 mm; EP-ZQ60 achieves 383 g at 50 mm versus IBM65 205 g at 45 mm \u2014 the EP-ZQ platform consistently extracts higher injection weight from a given screw diameter than IBM-class American machines at equal diameter, due to the 22:1 L\/D barrel design.<\/p>\n<\/div>\n

\n

Q3: How does EP-ZQ135’s 1,300mm platen enable 30 cavities at 10ml when IBM175’s 635mm restricts to ~16?<\/p>\n

At 10 ml format with 38 mm mandrel centre-to-centre pitch: EP-ZQ135’s 1,300 mm effective platen accommodates 30 mandrel positions (30 \u00d7 38 mm = 1,140 mm, within 1,300 mm with 160 mm for tooling structure). IBM175-class at 635 mm wide accommodates approximately 16 positions (16 \u00d7 38 mm = 608 mm, within 635 mm limit). IBM175-class taller platen (1,372 mm) could theoretically host dual-row mandrel layouts, but dual-row IBM mandrel tooling is not standard practice in pharmaceutical and cosmetic IBM production due to significantly increased tooling complexity, cost and maintenance overhead. The practical cavity count from IBM175-class at 10 ml from a 635 mm wide platen in single-row standard IBM tooling is approximately 16 positions \u2014 versus EP-ZQ135’s confirmed 30.<\/p>\n<\/div>\n

\n

Q4: Is Jomar IBM175’s 1,560kN clamp advantage meaningful for pharmaceutical IBM at 18-cavity 100ml format?<\/p>\n

At 18 cavities for 100 ml pharmaceutical HDPE production: EP-ZQ135 at 1,350 kN distributes 75 kN per injection cavity. Standard pharmaceutical PP and HDPE IBM production requires approximately 50\u201380 kN per injection cavity for neck thread OD dimensional compliance at \u00b10.05 mm tolerance. EP-ZQ135 at 75 kN per cavity at 18-cavity 100 ml format operates well within this range. IBM175-class at 1,560 kN would distribute 86.7 kN per cavity at the same 18 cavities \u2014 within the same 50\u201380 kN practical range. The additional 11.7 kN per cavity from IBM175-class clamping does not change the production process for standard pharmaceutical HDPE IBM at this cavity count. The clamping advantage of IBM175-class is not functionally significant at the 18-cavity 100 ml pharmaceutical IBM scenario that defines this tonnage class application.<\/p>\n<\/div>\n

\n

Q5: What is the EP-ZQ135 machine and mould lead time?<\/p>\n

Machine: 65\u201380 working days from order confirmation and deposit. Mould tooling: 55\u201365 working days (H13 SPI B1) or 70\u201385 working days (S136 SPI A1 for 30-cavity PCTG precision tooling). Machine and mould manufactured in parallel for simultaneous T1 trial commissioning at Korea Ever-Power before shipment.<\/p>\n<\/div>\n

\n

Q6: What GMP documentation does Korea Ever-Power provide with EP-ZQ135?<\/p>\n

Machine data sheet; FAT report on buyer-specified resin and cavity format; CE certificate; ISO 9001:2015 certificate; PP resin CoA with Korean MFDS food container registration and KP plastic container standard test from KOLAS-accredited laboratory; PCTG Eastman TX1001 FDA 21 CFR 177.2490 food contact letter + EU 10\/2011 Declaration of Conformity. IQ\/OQ documentation template on request.<\/p>\n<\/div>\n

\n

Q7: What after-sales service does Korea Ever-Power provide in Korea for EP-ZQ135?<\/p>\n

Korea Ever-Power Ansan-si, Gyeonggi-do: one week on-site commissioning and operator training; 24\/7 remote PLC VPN diagnostic support for 90 days post-commissioning with 2-hour software response SLA; same-day Korean spare parts dispatch; scheduled preventive maintenance on annual service contract. At the EP-ZQ135 maximum production scale \u2014 the top-range IBM output tier at 30+ million bottles per month at 10 ml format \u2014 every hour of unplanned downtime has the largest absolute impact of any machine in this product line. In-country 2-hour diagnostic and same-day parts response is operationally most critical at this production scale versus North America-based Jomar service network response for Korean buyers.<\/p>\n<\/div>\n

\n

Q8: What PCTG optical quality does EP-ZQ135 with S136 SPI A1 tooling achieve at 30-cavity scale?<\/p>\n

0.8\u20131.6% ASTM D1003 integrating sphere haze at 0.5\u20130.6 mm body wall across all 30 cavity positions, verified on Korea Ever-Power ZQ-series T1 trials. At 30 cavities for 10 ml PCTG eye serum droppers, EP-ZQ135 with S136 SPI A1 produces approximately 30,000\u201330,900 crystal-clear luxury-grade bottles per hour \u2014 the highest output rate at sub-2% ASTM D1003 haze of any IBM machine in this entire product series. IBM175-class standard tooling does not include S136 SPI A1 as a published upgrade and the 635 mm narrow platen limits cavity count at 10 ml to approximately 16 regardless of mould steel choice.<\/p>\n<\/div>\n

\n

Q9: For 100ml pharmaceutical HDPE production, what is the annual output difference between EP-ZQ135 and IBM175?<\/p>\n

EP-ZQ135: 18 cavities at 100 ml, 35 g preform, 5.5 s typical total cycle at 100 ml, 3 shifts per day, 330 production days = approximately (18 \u00d7 3,600 \/ 5.5) \u00d7 24 \u00d7 330 \u2248 193 million bottles per year. IBM175-class at 635 mm platen and 550 g shot limit: approximately 15 cavities at 100 ml, same cycle and shift structure \u2248 161 million bottles per year. Difference: approximately 32 million additional bottles per year from EP-ZQ135 versus IBM175-class at equal capital, energy and labour \u2014 purely from the combination of wider platen enabling 3 additional cavities at equal shot weight headroom.<\/p>\n<\/div>\n

\n

Q10: Does Korea Ever-Power EP-ZQ135 carry CE marking for European pharmaceutical markets?<\/p>\n

Yes. CE marking with Declaration of Conformity to the relevant EU Machinery Directive is standard on every EP-ZQ135. European-destination units configured for 400 V \/ 50 Hz at order stage. Full CE documentation package available for review before order confirmation on request.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Ready to evaluate EP-ZQ135 as your Jomar IBM175 replacement?<\/h2>\n

Send Korea Ever-Power your bottle drawing, resin grade, required cavity count and annual production volume. We return a full feasibility report within 48 hours \u2014 machine configuration, projected output per hour, mould tooling lead time and transparent quotation.<\/p>\n

\ud83d\udce7 Send Enquiry<\/a>
\n\ud83d\udcc4 Request Quote Form<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

EP-ZQ135 is a 3-station European injection blow molding machine with 1,350 kN injection clamping and 650 g maximum injection weight (70 mm screw). Jomar IBM175-class: 1,560 kN (16% higher), same 70 mm screw, shot 450\u2013550 g (100 g less than EP-ZQ135 at equal screw). The platen difference is the most dramatic specification in this series: EP-ZQ135 platen 1,300 \u00d7 500 mm versus IBM175-class 635 \u00d7 1,372 mm \u2014 EP-ZQ135 platen is 665 mm wider and 872 mm shorter, a fundamentally different geometry reflecting the European vs American IBM architecture divide. Machine height 2.4 m versus IBM175-class 3.58 m (\u221233%), fitting Korean pharmaceutical GMP cleanrooms with 3.0 m ceiling clearance. Machine width 2.0 m versus IBM175-class 2.67 m (\u221225%). Up to 30 cavities at 10 ml, 18 at 100 ml. Processes PP, PCTG, HDPE, LDPE, PS, ABS, EVA, PLA. S136 SPI A1 mould: PCTG haze below 2%. Dry cycle 3.5 s, total power 95 kW, footprint 5.5 \u00d7 2.0 \u00d7 2.4 m, weight 18 T. CE + ISO 9001:2015. Brand references for buyer selection convenience only; Korea Ever-Power is not affiliated with Jomar Corporation.<\/p>","protected":false},"featured_media":1006,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[28],"product_tag":[],"class_list":["post-1305","product","type-product","status-publish","has-post-thumbnail","product_cat-ibm-machine-replacement","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/isbm-blow-molding.com\/pt\/wp-json\/wp\/v2\/product\/1305","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/isbm-blow-molding.com\/pt\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/isbm-blow-molding.com\/pt\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/pt\/wp-json\/wp\/v2\/media\/1006"}],"wp:attachment":[{"href":"https:\/\/isbm-blow-molding.com\/pt\/wp-json\/wp\/v2\/media?parent=1305"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/pt\/wp-json\/wp\/v2\/product_brand?post=1305"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/pt\/wp-json\/wp\/v2\/product_cat?post=1305"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/pt\/wp-json\/wp\/v2\/product_tag?post=1305"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}