{"id":1289,"date":"2026-07-20T06:02:26","date_gmt":"2026-07-20T06:02:26","guid":{"rendered":"https:\/\/isbm-blow-molding.com\/?post_type=product&p=1289"},"modified":"2026-07-20T06:02:26","modified_gmt":"2026-07-20T06:02:26","slug":"ep-zq60-ibm-machine-replacement-for-jomar-ibm65","status":"publish","type":"product","link":"https:\/\/isbm-blow-molding.com\/nl\/product\/ep-zq60-ibm-machine-replacement-for-jomar-ibm65\/","title":{"rendered":"EP-ZQ60 IBM-machine \u2014 Vervanging voor Jomar IBM65"},"content":{"rendered":"
\n
\n

<\/p>\n

Selection Reference Notice:<\/strong> “Jomar” and “IBM65” are trademarks of Jomar Corporation (USA), referenced solely to help buyers identify the Korea Ever-Power EP-ZQ60 as a functionally comparable alternative. Korea Ever-Power does not manufacture, distribute or represent Jomar products. All technical data below refers exclusively to the Korea Ever-Power EP-ZQ60.<\/div>\n

<\/p>\n

Productoverzicht<\/h2>\n

De Korea Ever-Power EP-ZQ60<\/a><\/strong> operates in the Jomar IBM65 tonnage class with substantially superior specifications across every critical parameter. At 600 kN injection clamping force<\/strong>, it delivers 30 percent more clamp than the IBM65-class 460 kN. With the 50 mm screw option, maximum injection weight reaches 383 g<\/strong> \u2014 87 percent above the IBM65 ceiling of 205 g. These are not marginal improvements; they represent a fundamental step up in production capability within the same machine class.<\/p>\n

The most immediately visible difference is machine height. The EP-ZQ60 stands at 1.8 m<\/strong> \u2014 the Jomar IBM65-class at 3.41 m<\/strong> is almost twice as tall. For Korean pharmaceutical manufacturers who have historically been unable to install IBM65-class machines in GMP cleanrooms without expensive ceiling modifications, the EP-ZQ60 resolves this with a 1.8 m profile that fits a 2.4 m cleanroom ceiling with 0.6 m of service clearance. The EP-ZQ60 width of 1.4 m is also narrower than the IBM65-class 1.98 m, reducing the minimum aisle requirement between machines and allowing higher machine density per production bay.<\/p>\n

\"Spuitblaasvormmachine<\/p>\n

The 3-station simultaneous cycle (Injection \u2192 Blow \u2192 Stripping) runs at a 3.5-second dry cycle<\/strong>, with all three stations operating in parallel. Fourteen cavities at 10 ml and eight cavities at 100 ml make EP-ZQ60 the correct machine for Korean mid-to-high volume pharmaceutical, cosmetic and daily chemical IBM bottle production. Material range covers PP, PCTG, HDPE, LDPE, PS, ABS, EVA, PLA and corn starch resin. The optional S136 SPI A1 mould steel<\/strong> (Ra \u2264 0.010 \u03bcm) produces PCTG crystal-clear haze below 2 percent for luxury K-beauty cosmetic serum vials. See the full spuitblaasvormmachine<\/a> range for all Korea Ever-Power IBM platforms.<\/p>\n

<\/p>\n

\n
\n
600 kN<\/div>\n
Injectieklem
\n+30% vs IBM65<\/span><\/div>\n<\/div>\n
\n
383 g<\/div>\n
Max Shot (50mm)
\n+87% vs IBM65 205g<\/span><\/div>\n<\/div>\n
\n
1.8 m<\/div>\n
Machine Height
\n\u221247% vs IBM65 3.41m<\/span><\/div>\n<\/div>\n
\n
14 cav<\/div>\n
Max @ 10 ml
\n8 cavities @ 100 ml<\/span><\/div>\n<\/div>\n
\n
37 kW<\/div>\n
Totaal vermogen
\n5 T \/ 3.8\u00d71.4m<\/span><\/div>\n<\/div>\n
\n
3.5 s<\/div>\n
Droogcyclus
\n600\u00d7390mm platen<\/span><\/div>\n<\/div>\n<\/div>\n

<\/p>\n

Technische specificaties<\/h2>\n

\"EP-ZQ60<\/p>\n

All parameters are sourced from Korea Ever-Power ZQ60 product specification data. Screw selection (45 mm or 50 mm) is confirmed against your resin MFR and target preform weight before the quote is finalised.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Parameter<\/th>\nEP-ZQ60 Value<\/th>\n<\/tr>\n<\/thead>\n
Machine-indeling<\/td>\n3-station rotary \u2014 simultaneous Injection \/ Blow \/ Stripping<\/td>\n<\/tr>\n
Schroefdiameter<\/td>\n45 mm (standard) \/ 50 mm (option)<\/td>\n<\/tr>\n
Schroef L\/D-verhouding<\/td>\n22 : 1<\/td>\n<\/tr>\n
Injectiegewicht<\/td>\n260 g (45 mm) \/ 383 g (50 mm)<\/td>\n<\/tr>\n
Injectieklemkracht<\/td>\n600 kN<\/td>\n<\/tr>\n
Slagklemkracht<\/td>\n90 kN<\/td>\n<\/tr>\n
Injection Open Stroke<\/td>\n200 mm<\/td>\n<\/tr>\n
Blow Open Stroke<\/td>\n170 mm<\/td>\n<\/tr>\n
Rotary Table Lift<\/td>\n80 mm<\/td>\n<\/tr>\n
Strippende slag<\/td>\n260 mm<\/td>\n<\/tr>\n
Verwarmingsvermogen<\/td>\n10 kW<\/td>\n<\/tr>\n
Barrel Heating Zones<\/td>\n3 + N<\/td>\n<\/tr>\n
Mould Platen (L \u00d7 W)<\/td>\n600 \u00d7 390 mm<\/td>\n<\/tr>\n
Vormdikte<\/td>\n220 mm<\/td>\n<\/tr>\n
Maximale flesdiameter<\/td>\n150 mm<\/td>\n<\/tr>\n
Maximale fleshoogte<\/td>\n260 mm<\/td>\n<\/tr>\n
Bottle Volume Range<\/td>\n1 \u2013 2000 ml<\/td>\n<\/tr>\n
Dry Cycle Time<\/td>\n3.5 s<\/td>\n<\/tr>\n
Hydraulische druk<\/td>\n14 MPa<\/td>\n<\/tr>\n
Motorvermogen<\/td>\n22 kW<\/td>\n<\/tr>\n
Totaal ge\u00efnstalleerd vermogen<\/td>\n37 kW<\/td>\n<\/tr>\n
Compressed Air<\/td>\n0.7 \u2013 1.2 MPa \u00a0\/\u00a0 1.0 m\u00b3\/min<\/td>\n<\/tr>\n
Cooling Water<\/td>\n5.0 m\u00b3\/h \u00a0\/\u00a0 0.3 \u2013 0.4 MPa<\/td>\n<\/tr>\n
Afmetingen van de machine (L \u00d7 B \u00d7 H)<\/td>\n3.8 \u00d7 1.4 \u00d7 1.8 m<\/td>\n<\/tr>\n
Machinegewicht<\/td>\n5 T<\/td>\n<\/tr>\n
Compatibele materialen<\/td>\nPP, PCTG, HDPE, LDPE, PS (lactic acid), ABS, EVA, PLA, corn starch resin<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Max Cavity Count by Bottle Volume \u2014 EP-ZQ60<\/h3>\n
\n\n\n\n\n\n
10 ml<\/th>\n30 ml<\/th>\n60 ml<\/th>\n100 ml<\/th>\n250 ml<\/th>\n500 ml<\/th>\n1000 ml<\/th>\n<\/tr>\n<\/thead>\n
14<\/td>\n12<\/td>\n10<\/td>\n8<\/td>\n5<\/td>\n3<\/td>\n2<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

For reference only. Source: Korea Ever-Power ZQ60 product specification data.<\/p>\n

<\/p>\n

EP-ZQ60 vs Jomar IBM65 \u2014 Parameter Comparison<\/h2>\n

\"EP-ZQ60<\/p>\n

Comparison uses Korea Ever-Power ZQ60 catalogue data alongside Jomar IBM65-class reference figures from publicly available Jomar technical literature and the Korea Ever-Power IBM competitor analysis report. Jomar data is cited for buyer selection convenience only.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Parameter<\/th>\nEP-ZQ60<\/th>\nJomar IBM65 (Ref.)<\/th>\nDifference<\/th>\n<\/tr>\n<\/thead>\n
Injection Clamp Force<\/td>\n600 kN<\/td>\n460 kN<\/td>\n+30%<\/td>\n<\/tr>\n
Schroefdiameter<\/td>\n45 \/ 50 mm<\/td>\n45 mm<\/td>\nDual option<\/td>\n<\/tr>\n
Max Injection Weight<\/td>\n260 \/ 383 g<\/td>\n205 g<\/td>\n+87%<\/td>\n<\/tr>\n
Mould Platen (L \u00d7 W)<\/td>\n600 \u00d7 390 mm<\/td>\n432 \u00d7 660 mm<\/td>\nDifferent ratio<\/td>\n<\/tr>\n
Machine Length<\/td>\n3.8 m<\/td>\n2.92 m<\/td>\nIBM65 shorter<\/td>\n<\/tr>\n
Machine Width<\/td>\n1.4 m<\/td>\n1.98 m<\/td>\n\u221229%<\/td>\n<\/tr>\n
Machine Height<\/td>\n1.8 m<\/td>\n3.41 m<\/td>\n\u221247%<\/td>\n<\/tr>\n
Machinegewicht<\/td>\n5 T<\/td>\n\u2014 (not published)<\/td>\n\u2014<\/td>\n<\/tr>\n
Totaal ge\u00efnstalleerd vermogen<\/td>\n37 kW<\/td>\n\u2014 (not published)<\/td>\n10\u201320% less\/cycle<\/td>\n<\/tr>\n
Max Cavities @ 10 ml<\/td>\n14<\/td>\n\u2014 (not published)<\/td>\n\u2014<\/td>\n<\/tr>\n
PCTG SPI A1 Option<\/td>\nS136 \u2014 haze < 2%<\/td>\nStandard tooling<\/td>\nLuxury grade<\/td>\n<\/tr>\n
Certification<\/td>\nCE + ISO 9001:2015<\/td>\nCE<\/td>\nEqual<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Buyers comparing other Jomar models will find dedicated pages for EP-ZQ40 vs IBM40, EP-ZQ80 vs IBM85S, EP-ZQ110 vs IBM135 and EP-ZQ135 vs IBM175 in the IBM machine replacement guide<\/a>.<\/p>\n

\"EP-ZQ60<\/p>\n

Core Advantages Over Jomar IBM65<\/h2>\n
\n
\n
\ud83d\udd25 600 kN \u2014 30% More Clamp Force<\/div>\n

The IBM65-class at 460 kN is outclassed by EP-ZQ60 at 600 kN in every injection clamping scenario. At 100 ml pharmaceutical PP bottle production with 8 cavities, the additional 140 kN of clamping force distributes across the injection cavity stack, reducing per-cavity flash risk and enabling tighter neck thread tolerance. The European pressurised-clamping design delivers this 600 kN without the booster cylinder participating in mould open\/close travel \u2014 keeping hydraulic seal life above 3 years in continuous pharmaceutical production.<\/p>\n<\/div>\n

\n
\ud83d\udcc8 383 g Shot \u2014 87% Above IBM65 Ceiling<\/div>\n

Jomar IBM65-class at 205 g maximum limits pharmaceutical HDPE 60 ml bottle production (at 25 g per preform) to 8 cavities (8 \u00d7 25 g = 200 g). EP-ZQ60 at 383 g with the 50 mm screw runs the same 60 ml format at 10 cavities (10 \u00d7 25 g = 250 g, within limit) \u2014 a 25% output increase from the same format investment. At heavier-wall pharmaceutical formats (40 g per bottle), EP-ZQ60 at 383 g runs 9 cavities (360 g) versus IBM65-class limited to 5 cavities (200 g) \u2014 a near-doubling of output at equal cycle time.<\/p>\n<\/div>\n

\n
\ud83c\udfd7 1.8 m Height \u2014 47% Lower Than IBM65<\/div>\n

The Jomar IBM65-class at 3.41 m height is the most frequently cited obstacle for Korean pharmaceutical buyers evaluating IBM65-class machines for GMP cleanroom installation. A 3.41 m machine in a 3.0 m cleanroom simply cannot be installed without structural ceiling modification costing 30\u201380 million KRW in most Korean pharmaceutical factory configurations. EP-ZQ60 at 1.8 m installs with 0.6 m overhead clearance in a 2.4 m cleanroom \u2014 no structural work, no ceiling height waiver, no delay.<\/p>\n<\/div>\n

\n
\ud83d\udcc7 29% Narrower \u2014 More Machines Per Bay<\/div>\n

EP-ZQ60 at 1.4 m width versus IBM65-class 1.98 m means a 0.58 m narrower machine footprint per unit. In a standard 10 m wide Korean pharmaceutical production bay with 0.8 m minimum aisle clearance per side, five EP-ZQ60 machines fit side by side (5 \u00d7 1.4 m + 2 \u00d7 0.8 m = 8.6 m, within 10 m bay); only three IBM65-class machines fit the same bay (3 \u00d7 1.98 m + 2 \u00d7 0.8 m = 7.54 m, with the 4th unit exceeding 10 m). Machine density directly determines the production capacity of a fixed factory footprint investment.<\/p>\n<\/div>\n

\n
\u26a1 10\u201320% Lower Energy Per Cycle<\/div>\n

Full European pressurised-clamping: booster cylinder pressurised during hold only, not during open\/close travel. EP-ZQ60 total installed power is 37 kW with steady-state operating power at 55\u201370% of rated in continuous production \u2014 10\u201320% lower per cycle than Jomar IBM65-class conventional hydraulic architecture of equivalent clamp tonnage. Over a 3-shift Korean pharmaceutical production schedule, this translates to measurable annual electricity cost savings per machine.<\/p>\n<\/div>\n

\n
\ud83d\udc8e PCTG Haze < 2% \u2014 S136 SPI A1 Mould<\/div>\n

S136 SPI A1 mould steel option (Ra \u2264 0.010 \u03bcm) produces PCTG crystal-clear cosmetic serum vials and premium pharmaceutical dropper bottles at 0.8\u20131.6% ASTM D1003 haze \u2014 verified on Korea Ever-Power ZQ-series T1 trials with Eastman TX1001. Jomar IBM65-class standard tooling does not include this mould steel grade. For Korean luxury K-beauty serum vial production at 10\u201330 ml in 10\u201312 cavity configuration, EP-ZQ60 with S136 SPI A1 tooling is the technically correct machine.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Application Scenarios<\/h2>\n

\"EP-ZQ60<\/p>\n

\n
\n
\ud83d\udc8a Pharmaceutical \u2014 Mid-to-High Volume PP and HDPE Bottles<\/div>\n

EP-ZQ60 is the correct machine for Korean pharmaceutical packaging lines requiring 8 cavities at 100 ml \u2014 a production scale that Jomar IBM65-class cannot achieve due to its 205 g shot weight ceiling. For standard 100 ml PP pharmaceutical syrup bottle at 25 g per bottle: EP-ZQ60 at 383 g runs 8 cavities (200 g total, within limit); IBM65-class at 205 g can only run 8 cavities at 25 g if barely within limit with no wall-weight headroom. At 30 g per bottle (heavier-wall pharmaceutical grade): EP-ZQ60 runs 8 cavities (240 g); IBM65-class is limited to 6 cavities (180 g). Closed injection-to-stripping cycle, \u00b10.05 mm neck thread tolerance, 100% cap-seal pass rate.<\/p>\n<\/div>\n

\n
\u2728 Premium K-Beauty Cosmetic \u2014 PCTG Serum Vials and Dropper Bottles<\/div>\n

At 14 cavities for 10 ml PCTG eye serum droppers, EP-ZQ60 produces approximately 14,000\u201314,400 bottles per hour \u2014 the output of a dedicated luxury K-beauty cosmetic serum production line in a single machine with a 1.8 m height profile that fits inside the cosmetic production cleanroom without overhead constraint. The S136 SPI A1 mould option delivers sub-2% PCTG haze across the full 14-cavity tooling stack.<\/p>\n<\/div>\n

\n
\ud83d\udca7 Daily Chemical \u2014 Large-Format PP and PCTG Pump and Spray Bottles<\/div>\n

Korean shampoo, body wash, fragrance mist and daily chemical spray bottle production (100\u2013500 ml) at 5\u20138 cavity configurations on EP-ZQ60. The 383 g shot weight at 50 mm screw handles 5-cavity 500 ml PP shampoo bottles (5 \u00d7 55 g = 275 g, within 383 g limit) \u2014 a configuration that IBM65-class at 205 g cannot support (5 \u00d7 55 g = 275 g, exceeds IBM65 limit by 70 g).<\/p>\n<\/div>\n

\n
\ud83c\udf3f Food Supplement and Health \u2014 PP and HDPE Mid-Volume<\/div>\n

Korean supplement capsule, probiotic and vitamin container IBM at 60\u2013500 ml in 3\u201310 cavity configurations on EP-ZQ60. Korea Ever-Power provides food-contact documentation (Korean MFDS, FDA 21 CFR 177.1520 for PP, EU 10\/2011) at commercial programme commencement.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

EP-ZQ Series Selector<\/h2>\n

All data sourced from Korea Ever-Power ZQ-series product specification catalogue. Jomar model designations are cited for buyer reference only.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n
Parameter<\/th>\nEP-ZQ40<\/th>\nEP-ZQ60<\/th>\nEP-ZQ80<\/th>\nEP-ZQ110<\/th>\nEP-ZQ135<\/th>\n<\/tr>\n<\/thead>\n
Injectieklem<\/td>\n400 kN<\/td>\n600 kN<\/td>\n800 kN<\/td>\n1,100 kN<\/td>\n1,350 kN<\/td>\n<\/tr>\n
Max Shot<\/td>\n190\/260 g<\/td>\n260\/383 g<\/td>\n466 g<\/td>\n540 g<\/td>\n650 g<\/td>\n<\/tr>\n
Screw<\/td>\n40\/45 mm<\/td>\n45\/50 mm<\/td>\n55 mm<\/td>\n65 mm<\/td>\n70 mm<\/td>\n<\/tr>\n
Platen<\/td>\n480\u00d7340 mm<\/td>\n600\u00d7390 mm<\/td>\n800\u00d7400 mm<\/td>\n1100\u00d7460 mm<\/td>\n1300\u00d7500 mm<\/td>\n<\/tr>\n
Caviteiten @10ml<\/td>\n9<\/td>\n14<\/td>\n20<\/td>\n24<\/td>\n30<\/td>\n<\/tr>\n
Hoogte<\/td>\n1.7 m<\/td>\n1.8 m<\/td>\n2.0 m<\/td>\n2.2 m<\/td>\n2.4 m<\/td>\n<\/tr>\n
Totaal vermogen<\/td>\n20 kW<\/td>\n37 kW<\/td>\n55 kW<\/td>\n80 kW<\/td>\n95 kW<\/td>\n<\/tr>\n
Jomar Equivalent<\/td>\nIBM40<\/td>\nIBM65<\/td>\nIBM85S<\/td>\nIBM135<\/td>\nIBM175<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Source: Korea Ever-Power ZQ-series product specification data. Jomar designations are for buyer reference only.<\/p>\n

<\/p>\n

What to Confirm Before Ordering<\/h2>\n

A correctly scoped EP-ZQ60 order ships in 50\u201365 working days. Confirm the following with Korea Ever-Power before finalising your quote.<\/p>\n

\n
\n
\u2460 Bottle Geometry & Neck Finish<\/div>\n

STEP file or drawing with body diameter, height and neck thread standard (e.g. 24\/410, 28\/400, 33\/400). IBM neck OD tolerance \u00b10.05 mm.<\/p>\n<\/div>\n

\n
\u2461 Resin Grade & Supplier Data Sheet<\/div>\n

Required for 45 mm vs 50 mm screw selection and barrel temperature profiling. Include data sheet for PCTG, HDPE high-MW and filled PP.<\/p>\n<\/div>\n

\n
\u2462 Annual Production Volume<\/div>\n

EP-ZQ60 suits annual volumes of 20\u201380 million bottles at 100 ml format. Below that, EP-ZQ40 is more economical; above, EP-ZQ80 or higher scales better.<\/p>\n<\/div>\n

\n
\u2463 Mould Steel Grade<\/div>\n

H13 SPI B1 for standard opaque PP and HDPE bottles. S136 SPI A1 (Ra \u2264 0.010 \u03bcm) for PCTG crystal-clear pharmaceutical dropper vials and luxury K-beauty cosmetic serum vials.<\/p>\n<\/div>\n

\n
\u2464 Existing IBM65 Tooling<\/div>\n

Jomar IBM65 platen 432 \u00d7 660 mm vs EP-ZQ60 600 \u00d7 390 mm \u2014 different dimensional ratio. Send mould base drawings for Korea Ever-Power compatibility assessment before ordering.<\/p>\n<\/div>\n

\n
\u2465 Utilities & Clearance<\/div>\n

Air: 0.7\u20131.2 MPa \/ 1.0 m\u00b3\/min. Water: 5.0 m\u00b3\/h. Floor: min 5.0 \u00d7 2.0 m. Height 1.8 m fits 2.4 m GMP cleanrooms. Voltage: 380 V\/60 Hz (Korea) or 400 V\/50 Hz (EU).<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Veelgestelde vragen<\/h2>\n
\n
\n

Q1: Will existing Jomar IBM65 mould tooling fit the EP-ZQ60?<\/p>\n

Not directly. The Jomar IBM65 platen dimensions (432 \u00d7 660 mm) have a very different aspect ratio from EP-ZQ60 (600 \u00d7 390 mm). Mandrel pitch, mould thickness (220 mm on EP-ZQ60) and bolt-hole patterns also differ. Send your IBM65 mould base drawings for a Korea Ever-Power dimensional assessment \u2014 we advise within 5 working days at no cost.<\/p>\n<\/div>\n

\n

Q2: Why is the Jomar IBM65 at 3.41 m height so much taller than EP-ZQ60 at 1.8 m?<\/p>\n

The Jomar IBM65-class machine height reflects its American-style hydraulic clamping architecture, where the main hydraulic cylinder for mould clamping is mounted vertically above the injection unit, adding significant height to the overall machine profile. Korea Ever-Power EP-ZQ60 uses a European horizontal pressurised-clamping layout where the booster cylinder does not need vertical travel clearance \u2014 resulting in the 1.8 m profile that fits standard Korean factory and cleanroom ceiling heights.<\/p>\n<\/div>\n

\n

Q3: How many more cavities does EP-ZQ60 support versus IBM65 for 60 ml pharmaceutical bottles?<\/p>\n

For a typical 60 ml pharmaceutical PP bottle at 20 g per bottle: EP-ZQ60 at 383 g maximum supports 10 cavities (10 \u00d7 20 g = 200 g, within limit \u2014 confirmed in EP-ZQ60 cavity table at 60 ml = 10 cavities). Jomar IBM65-class at 205 g maximum supports 10 cavities at 20 g per bottle (10 \u00d7 20 g = 200 g, within limit \u2014 marginally). At heavier-wall 60 ml pharmaceutical bottles at 25 g per bottle: EP-ZQ60 at 383 g runs 10 cavities (250 g); IBM65-class at 205 g is limited to 8 cavities (200 g). The heavier the wall, the larger the EP-ZQ60 output advantage grows.<\/p>\n<\/div>\n

\n

Q4: What is the EP-ZQ60 machine and mould lead time?<\/p>\n

Machine: 50\u201365 working days from order confirmation and deposit. Mould tooling: 40\u201350 working days (H13 SPI B1) or 55\u201370 working days (S136 SPI A1). Machine and mould manufactured in parallel for simultaneous T1 trial commissioning before shipment.<\/p>\n<\/div>\n

\n

Q5: Can EP-ZQ60 install in a Korean pharmaceutical GMP cleanroom with 2.4 m ceiling?<\/p>\n

Yes. EP-ZQ60 at 1.8 m machine height leaves 0.6 m overhead clearance in a 2.4 m GMP cleanroom \u2014 sufficient for barrel heater element service access (requiring approximately 0.4\u20130.5 m clearance above the heater bands). This resolves the fundamental installation obstacle that the Jomar IBM65-class 3.41 m height presents for Korean pharmaceutical GMP cleanroom buyers, who typically face ceiling heights of 2.4\u20133.0 m without structural overhead.<\/p>\n<\/div>\n

\n

Q6: What GMP documentation does Korea Ever-Power provide for pharmaceutical packaging?<\/p>\n

Machine data sheet; FAT report on buyer-specified resin and cavity format; CE certificate; ISO 9001:2015 certificate; PP resin CoA with Korean MFDS food container registration and KP plastic container standard test from KOLAS-accredited laboratory; PCTG Eastman TX1001 FDA 21 CFR 177.2490 food contact letter + EU 10\/2011 Declaration of Conformity. IQ\/OQ documentation template on request.<\/p>\n<\/div>\n

\n

Q7: What after-sales service does Korea Ever-Power provide in Korea?<\/p>\n

One week on-site commissioning and operator training at buyer’s facility. 24\/7 remote PLC VPN diagnostic access for 90 days post-commissioning with 2-hour software issue response SLA. Korea Ever-Power Ansan-si, Gyeonggi-do operations maintain spare parts inventory for same-day dispatch within Korea. Scheduled preventive maintenance visit programme available on annual service contract.<\/p>\n<\/div>\n

\n

Q8: How does the 600 kN EP-ZQ60 compare to EP-ZQ40 (400 kN) for pharmaceutical HDPE production?<\/p>\n

EP-ZQ60 is the correct choice when annual pharmaceutical HDPE bottle volume at 100 ml exceeds approximately 20 million units per year, or when cavity count requirements above 4 cavities at 100 ml are needed. EP-ZQ40 (400 kN, 260 g, 4 cavities at 100 ml) handles pharmaceutical HDPE at lower production volumes. EP-ZQ60 (600 kN, 383 g, 8 cavities at 100 ml) doubles the cavity count and output from the same floor space and cycle time.<\/p>\n<\/div>\n

\n

Q9: Which Korea Ever-Power model replaces Jomar IBM85S for buyers needing to scale beyond IBM65 class?<\/p>\n

EP-ZQ80 (800 kN, screw 55 mm, max shot 466 g, platen 800 \u00d7 400 mm, total power 55 kW, machine 4.5 \u00d7 1.6 \u00d7 2.0 m, 10 T) replaces Jomar IBM85S-class (680 kN, screw 55 mm, shot 300 g, platen 464 \u00d7 749 mm). Dedicated comparison page in the IBM machine replacement guide<\/a>.<\/p>\n<\/div>\n

\n

Q10: Does Korea Ever-Power EP-ZQ60 carry CE marking?<\/p>\n

Yes. CE marking documentation including Declaration of Conformity to the relevant EU Machinery Directive is standard on every EP-ZQ60. EU-destination units configured for 400 V \/ 50 Hz at order stage. Full CE documentation package available for review before order confirmation on request.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Ready to evaluate EP-ZQ60 as your Jomar IBM65 replacement?<\/h2>\n

Send Korea Ever-Power your bottle drawing, resin grade, cavity count requirement and annual production volume. We return a full feasibility report within 48 hours \u2014 machine configuration, projected output per hour, mould tooling lead time and transparent quotation.<\/p>\n

\ud83d\udce7 Send Enquiry<\/a>
\n\ud83d\udcc4 Request Quote Form<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

EP-ZQ60 is a 3-station European injection blow molding machine with 600 kN injection clamping \u2014 30% above Jomar IBM65-class 460 kN \u2014 and 383 g maximum injection weight (50 mm screw), 87% above the IBM65 ceiling of 205 g. Machine height 1.8 m versus Jomar IBM65-class 3.41 m \u2014 a 47% reduction that transforms GMP cleanroom installation from a structural engineering challenge into a standard fit. Footprint 3.8 \u00d7 1.4 m versus 2.92 \u00d7 1.98 m (narrower width). Up to 14 cavities at 10 ml, 8 cavities at 100 ml. Screw options: 45 mm (260 g) or 50 mm (383 g). Processes PP, PCTG, HDPE, LDPE, PS, ABS, EVA, PLA. S136 SPI A1 mould: PCTG haze below 2%. Dry cycle 3.5 s, total power 37 kW, weight 5 T. CE + ISO 9001:2015. Brand references are for buyer selection convenience only; Korea Ever-Power is not affiliated with Jomar Corporation.<\/p>","protected":false},"featured_media":1003,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[28],"product_tag":[],"class_list":["post-1289","product","type-product","status-publish","has-post-thumbnail","product_cat-ibm-machine-replacement","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/isbm-blow-molding.com\/nl\/wp-json\/wp\/v2\/product\/1289","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/isbm-blow-molding.com\/nl\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/isbm-blow-molding.com\/nl\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/nl\/wp-json\/wp\/v2\/media\/1003"}],"wp:attachment":[{"href":"https:\/\/isbm-blow-molding.com\/nl\/wp-json\/wp\/v2\/media?parent=1289"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/nl\/wp-json\/wp\/v2\/product_brand?post=1289"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/nl\/wp-json\/wp\/v2\/product_cat?post=1289"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/nl\/wp-json\/wp\/v2\/product_tag?post=1289"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}