{"id":1027,"date":"2026-07-03T06:42:19","date_gmt":"2026-07-03T06:42:19","guid":{"rendered":"https:\/\/isbm-blow-molding.com\/?post_type=product&p=1027"},"modified":"2026-07-03T06:42:20","modified_gmt":"2026-07-03T06:42:20","slug":"ep-zq110-injection-blow-molding-machine-european-style","status":"publish","type":"product","link":"https:\/\/isbm-blow-molding.com\/nl\/product\/ep-zq110-injection-blow-molding-machine-european-style\/","title":{"rendered":"EP-ZQ110 Spuitblaasvormmachine"},"content":{"rendered":"
\n

<\/p>\n

Productoverzicht<\/h2>\n

The EP-ZQ110 is the largest standard-configuration model in Korea Ever-Power’s spuitblaasvormmachine<\/a> De ZQ110 is de machine die v\u00f3\u00f3r het vlaggenschip, de ZQ135, wordt gebruikt. Het is de machine die Koreaanse grote farmaceutische contractfabrikanten specificeren wanneer een productie van 24 caviteiten van 10 ml of 14 caviteiten van 100 ml per machine vereist is, en wanneer de economische voordelen van twee ZQ80-machines (met een hogere gecombineerde investering en een grotere fabrieksoppervlakte dan \u00e9\u00e9n ZQ110) niet langer opwegen tegen de consolidatie van de productie op \u00e9\u00e9n zwaar platform. Met een injectieklemkracht van 1100 kN heeft de ZQ110 37,51 ton meer klemkracht dan de ZQ80 \u2013 een verschil dat van belang is bij 24 caviteiten, wanneer het cumulatieve geprojecteerde caviteitsoppervlak dat de injectiedruk weerstaat, maximaal is binnen de serie.<\/p>\n

De ZQ110 erft beide hoogwaardige technische kenmerken die de ZQ80 onderscheiden van modellen uit lagere series: de uiterst nauwkeurige hoekverdeler die het openen en sluiten van de matrijs synchroniseert met de revolverlift voor herhaalbare indexering van 24 caviteiten, en het standaard dubbele hydraulische systeem (22+22 kW) dat een 20\u2013301 TP3T lager energieverbruik oplevert dan concurrerende systemen met \u00e9\u00e9n circuit in dezelfde machineklasse. Deze functies zijn standaard inbegrepen bij de ZQ110 en niet als upgrades \u2014 Koreaanse klanten betalen geen meerprijs bij bestelling om te profiteren van de productiviteits- en energie-effici\u00ebntievoordelen die ze bieden. De 4+N-loopzoneconfiguratie (voor het eerst ge\u00efntroduceerd in de ZQ-serie bij de ZQ80) is ook aanwezig op de ZQ110 en biedt de fijnere temperatuurregeling in de poortzone die nodig is voor het verwerken van grote spuitgewichten in hotrunner-systemen met 24 caviteiten.<\/p>\n

\"Spuitblaasvormmachine<\/p>\n

The ZQ110’s 65 mm screw and approximately 650 g shot weight serve the largest mould configurations in the ZQ hydraulic series: a full 24-cavity 10 ml hot runner injection mould requires a total runner and cavity resin volume that exceeds the ZQ80’s 55 mm \/ 466 g capacity. The ZQ110’s larger shot weight ensures that all 24 cavities fill simultaneously from a single injection shot without the short-shot risk at the periphery of the hot runner network that occurs when shot weight is marginal relative to the cavity count. At container volumes of 250 ml and above, the ZQ110’s 10-cavity 250 ml and 6\u20138 cavity 500 ml configurations make it a commercially important machine for Korean bulk personal care packaging, Korean cooking oil bottling and Korean industrial chemical container production at output rates that no ZQ60 or ZQ80 can match from a single machine.<\/p>\n

<\/p>\n

Technische specificaties \u2014 EP-ZQ110<\/h2>\n

The following parameters are Korea Ever-Power’s engineering specifications for the EP-ZQ110. Core confirmed specifications are indicated; additional parameters follow the ZQ series engineering progression and should be verified with Korea Ever-Power’s technical team during site preparation planning. All parameters are for reference and may be updated without notice.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/th>\nEenheid<\/th>\nEP-ZQ110<\/th>\n<\/tr>\n<\/thead>\n
Injectiesysteem<\/td>\n<\/tr>\n
Schroefdiameter<\/td>\nmm<\/td>\n65<\/td>\n<\/tr>\n
Schroef L\/D-verhouding<\/td>\n\u2014<\/td>\n22:1<\/td>\n<\/tr>\n
Injectiegewicht (ongeveer)<\/td>\nG<\/td>\n~650<\/td>\n<\/tr>\n
Verwarmingsvermogen<\/td>\nKW<\/td>\n22<\/td>\n<\/tr>\n
Aantal vatzones<\/td>\n\u2014<\/td>\n4+N<\/td>\n<\/tr>\n
Injectieberoerte<\/td>\nmm<\/td>\n180<\/td>\n<\/tr>\n
Klemsysteem<\/td>\n<\/tr>\n
Klemkracht \u2014 Injectie<\/td>\nKN<\/td>\n1,100<\/td>\n<\/tr>\n
Openingsslag \u2014 Injectie<\/td>\nmm<\/td>\n140<\/td>\n<\/tr>\n
Klemkracht \u2014 Blaaskracht (ongeveer)<\/td>\nKN<\/td>\n~150<\/td>\n<\/tr>\n
Openingsslag \u2014 Blazen<\/td>\nmm<\/td>\n140<\/td>\n<\/tr>\n
Hefhoogte van de draaitafel<\/td>\nmm<\/td>\n70<\/td>\n<\/tr>\n
Gietvorm<\/td>\n<\/tr>\n
Maximale afmetingen van de plaat (L\u00d7B) ca.<\/td>\nmm<\/td>\n~1.000 \u00d7 450<\/td>\n<\/tr>\n
Dikte van de mal (ongeveer)<\/td>\nmm<\/td>\n~320<\/td>\n<\/tr>\n
Maximale flesdiameter<\/td>\nmm<\/td>\n120<\/td>\n<\/tr>\n
Maximale fleshoogte<\/td>\nmm<\/td>\n220<\/td>\n<\/tr>\n
Geschikt flesvolume<\/td>\nml<\/td>\n1 \u2013 2.000<\/td>\n<\/tr>\n
Strippende slag<\/td>\nmm<\/td>\n230<\/td>\n<\/tr>\n
Vermogen, nutsvoorzieningen en afmetingen<\/td>\n<\/tr>\n
Hydraulische druk<\/td>\nMPa<\/td>\n14<\/td>\n<\/tr>\n
Motorvermogen (dubbel)<\/td>\nKW<\/td>\n22 + 22<\/td>\n<\/tr>\n
Droogcyclus<\/td>\nS<\/td>\n4<\/td>\n<\/tr>\n
Totaal vermogen<\/td>\nKW<\/td>\n80<\/td>\n<\/tr>\n
Bedrijfsvermogensverhouding<\/td>\n%<\/td>\n52 \u2013 70<\/td>\n<\/tr>\n
Minimale luchtdruk<\/td>\nMPa<\/td>\n0,7 \u2013 1,2<\/td>\n<\/tr>\n
Persluchtcapaciteit<\/td>\nM\u00b3\/min<\/td>\n0.7<\/td>\n<\/tr>\n
Koelwaterdebiet (ongeveer)<\/td>\nM\u00b3\/h<\/td>\n~5<\/td>\n<\/tr>\n
Koelwaterdruk<\/td>\nMPa<\/td>\n0,3 \u2013 0,4<\/td>\n<\/tr>\n
Afmetingen (L\u00d7B\u00d7H)<\/td>\nM<\/td>\n5 \u00d7 1,8 \u00d7 2,2<\/td>\n<\/tr>\n
Machinegewicht<\/td>\nTon<\/td>\n15<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Parameters marked “approx.” are based on ZQ series engineering progression and should be verified with Korea Ever-Power’s technical team. All parameters for reference only.<\/p>\n

EP-ZQ110 Referentie voor het aantal gaatjes per flesvolume<\/h3>\n

(Geschat op basis van de technische ontwikkeling van de ZQ-serie \u2014 neem contact op met Korea Ever-Power voor specifieke matrijsconfiguraties)<\/p>\n

\n\n\n\n\n\n
Inhoud per fles<\/th>\n10 ml<\/th>\n30 ml<\/th>\n60 ml<\/th>\n100 ml<\/th>\n250 ml<\/th>\n500 ml<\/th>\n1.000 ml<\/th>\n<\/tr>\n<\/thead>\n
Max. holtes<\/td>\n24<\/td>\n20 \u2013 22<\/td>\n16 \u2013 18<\/td>\n14<\/td>\n10<\/td>\n6 \u2013 8<\/td>\n4 \u2013 5<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Het aantal holtes is ter referentie. Korea Ever-Power behoudt zich het recht voor specificaties zonder voorafgaande kennisgeving te wijzigen.<\/p>\n

<\/p>\n

EP-ZQ110 Productielijn: Proces met 3 stations op een schaal van 24 caviteiten<\/h2>\n

\"Korea<\/p>\n

The EP-ZQ110 operates on the same 3-station concurrent-processing principle as all ZQ series machines, with all three stations \u2014 injection, blow moulding, and stripping \u2014 executing simultaneously on 24 independent mandrel sets. At the ZQ110’s scale, the production line around the machine requires proportionally more careful planning than lower-series models: at 24-cavity 10 ml output at approximately 21,600 bottles per operating hour, the downstream conveyor, inspection, labelling and counting equipment must be able to keep pace without the accumulation buffer becoming a production bottleneck.<\/p>\n

\"EP-ZQ110<\/p>\n

Station 1 \u2014 Injectie van de voorvorm bij 1.100 kN<\/h3>\n

Met een injectieklemkracht van 1100 kN houdt de ZQ110 een matrijs met 24 caviteiten gesloten tegen injectiedruk die bij machines met een lagere classificatie en dit aantal caviteiten zou leiden tot braamvorming of loslating van de matrijsvlakken. De 65 mm schroef levert circa 650 g per injectie \u2013 voldoende om alle 24 caviteiten gelijktijdig te vullen via het hotrunner-netwerk zonder dat de drukval over de buitenste caviteiten onvolledige injecties of gewichtsverschillen tussen binnenste en buitenste caviteiten veroorzaakt. De 4+N cilinderzoneconfiguratie zorgt voor de fijnafstelling van de poortzonetemperatuur die nodig is om de harsviscositeit aan het einde van het 24-drop runner-netwerk te beheersen, waar de stroompadlengte het grootst is en de temperatuurdaling van het smeltmateriaal het meest significant. De uiterst nauwkeurige hoekverdeler co\u00f6rdineert de matrijssluiting en de turretliftbewegingen aan het einde van elke cyclus, waardoor de 24 doornen met dezelfde hoekprecisie op de 24 matrijscaviteiten worden uitgelijnd in cyclus 1 als in cyclus 1.000.000.<\/p>\n

Station 2 \u2014 Gelijktijdig 24-caviteit blaasvormen<\/h3>\n

All 24 preforms are inflated simultaneously at the blow station, supported by approximately 150 KN blow clamping and the dual hydraulic system’s Circuit B \u2014 independent of the injection-side Circuit A. The dual circuit independence is especially important at 24-cavity blow production: in a single-circuit machine, the blow phase immediately follows the injection phase and shares the hydraulic pump that was under maximum load during injection. The residual pressure fluctuation from that transition reaches the blow station and creates non-uniform blow pressure across the 24 cavities. The ZQ110’s dual circuit eliminates this entirely: Circuit A handles injection and recovers while Circuit B handles blow clamping independently at its own steady-state pressure, producing uniform wall thickness distribution across all 24 cavities that single-circuit machines at this cavity count cannot reliably achieve.<\/p>\n

Station 3 \u2014 Productie met een snelheid van 24 flessen per cyclus<\/h3>\n

Twenty-four finished bottles are stripped and deposited to the output conveyor every cycle \u2014 at the ZQ110’s 4-second cycle time, this is a conveyor input rate of 6 bottles per second, or approximately 21,600 bottles per operating hour at 90% efficiency. Korea Ever-Power’s production line planning team advises on conveyor speed, accumulation capacity, and the number and type of downstream inspection stations (weight check, dimensional gauge, vision system) required to process the ZQ110’s output without creating a downstream bottleneck that forces the machine to be stopped waiting for downstream clearance. For Korean pharmaceutical production lines, a buffer accumulation table between the ZQ110 and the filling or labelling line is typically specified with sufficient capacity for 5\u20138 minutes of ZQ110 output \u2014 approximately 1,800\u20132,880 bottles at 10 ml format.<\/p>\n

<\/p>\n

EP-ZQ110 bij 1.100 kN: Technisch profiel en positie in de serie<\/h2>\n

De EP-ZQ110 neemt een specifieke en commercieel goed gedefinieerde positie in binnen de hydraulische ZQ-serie. Het is het eerste model dat de drempel van 1.000 kN injectieklemkracht overschrijdt en het eerste dat een productie met 24 caviteiten van 10 ml mogelijk maakt \u2013 het standaard maximale aantal caviteiten voor grootschalige farmaceutische IBM-productie in Korea op een hydraulisch platform, voordat men overstapte op de ZQ135. Inzicht in de positie van de ZQ110 binnen de serie en wat de klemkracht van 1.100 kN precies mogelijk maakt, helpt Koreaanse fabrieksingenieurs de ZQ110 te rechtvaardigen ten opzichte van de alternatieven ZQ80 en ZQ135.<\/p>\n

\n
\n

ZQ80 versus ZQ110 bij 24-holtes 10 ml<\/h3>\n

The ZQ80’s 800 KN injection clamping at 20 cavities leaves less than 40 KN per cavity at standard HDPE injection pressure. Running 24 cavities on a ZQ80 would reduce per-cavity clamping margin below the safety threshold for flash-free neck production. The ZQ110’s 1,100 KN at 24 cavities maintains approximately 45 KN per cavity \u2014 within the safe operating range for precision neck production. The 1,100 KN figure is not overspecification; it is the minimum correct specification for 24-cavity operation without flash risk at the neck parting line.<\/p>\n<\/div>\n

\n

ZQ110 versus ZQ135: Wanneer te stoppen bij ZQ110?<\/h3>\n

De ZQ135 verhoogt de capaciteit naar 30 caviteiten bij 10 ml en 1350 kN, met een 6+N-cilinderzoneconfiguratie voor het hoogste injectiegewicht in de serie. Voor Koreaanse fabrieken met een maximale productiebehoefte van 24 caviteiten voor 10 ml \u2013 waaronder de meeste grote farmaceutische contractverpakkingsbedrijven in Korea \u2013 biedt de ZQ110 de juiste output zonder de extra investering, ruimte, gewicht (15 ton versus 18 ton) en het energieverbruik (80 kW versus 95 kW) van de ZQ135. De ZQ110 is technisch correct en commercieel gezien de meest geschikte bovengrens voor de meeste investeringen in IBM-fabrieken in Korea op deze schaal.<\/p>\n<\/div>\n

\n

E\u00e9n ZQ110 versus twee ZQ80-machines<\/h3>\n

Two ZQ80 machines at 20 cavities each give 40 cavities total \u2014 higher than the ZQ110’s 24. But this comparison applies only if both ZQ80 machines run the same format simultaneously and no format variety is needed. In Korean pharmaceutical contract packaging where multiple SKUs share production time, the ZQ110’s single-machine operation means half the mould change events, half the startup scrap, one operator position instead of two, and one machine qualification file instead of two in the Korean GMP supplier documentation system \u2014 advantages that compound in value as the number of formats increases.<\/p>\n<\/div>\n<\/div>\n

IBM versus ISBM: Technologiekeuze op investeringsschaal ZQ110<\/h2>\n

Korea Ever-Power produceert zowel de IBM ZQ-serie als de ISBM HGY-serie, die verkrijgbaar zijn in de 4-stations ISBM-machineassortiment<\/a>. At the ZQ110 investment scale, the IBM vs ISBM process question typically resolves quickly on material grounds: the ZQ110 is the correct machine for Korean operations producing HDPE and PP containers, where no ISBM machine can match the ZQ110’s 24-cavity output rate or its material handling range. ISBM machines in the HGY series are the correct choice for Korean operations requiring crystal-clear biaxially oriented PET cosmetic or beverage containers \u2014 a fundamentally different material and bottle physics requirement from the HDPE pharmaceutical bottles that define the ZQ110’s primary market.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n
Criterium<\/th>\nIBM (EP-ZQ110)<\/th>\nISBM (HGY-serie)<\/th>\n<\/tr>\n<\/thead>\n
Primaire materialen<\/td>\nHDPE, LDPE, PP, PS, ABS, EVA, PCTG<\/td>\nHUISDIER, PETG, Tritan, PC, PP, PCTG<\/td>\n<\/tr>\n
Maximaal aantal gaatjes bij 10 ml<\/td>\n24 (EP-ZQ110)<\/td>\nTot 12 (HGY-serie)<\/td>\n<\/tr>\n
Nauwkeurige afwerking van de hals<\/td>\nSpuitgieten \u2014 hoogste precisie<\/td>\nSpuitgieten \u2014 hoogste precisie<\/td>\n<\/tr>\n
Flessenwandori\u00ebntatie<\/td>\nNiet-geori\u00ebnteerd \u2014 uniforme amorfe wand<\/td>\nBiaxiaal geori\u00ebnteerd PET \u2014 glasachtige helderheid<\/td>\n<\/tr>\n
HDPE farmaceutische flessen<\/td>\nNative applicatie<\/td>\nNiet van toepassing<\/td>\n<\/tr>\n
PET-flessen voor cosmetisch serum<\/td>\nNiet van toepassing<\/td>\nNative applicatie<\/td>\n<\/tr>\n
Geen flitsproductie<\/td>\nJa<\/td>\nJa<\/td>\n<\/tr>\n
Energiebesparing versus industrie<\/td>\n20\u201330% (dubbele hydrauliek)<\/td>\n30\u201340% (servoaandrijving)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Voor Koreaanse fabrieksinvesteerders wiens productie is gebaseerd op HDPE- en PP-verpakkingen voor farmaceutische producten, huishoudelijke chemicali\u00ebn of voedingsmiddelen, is de ZQ110 de technologie bij uitstek en is geen enkele ISBM-machine een alternatief op deze schaal. Voor investeringen die zowel HDPE-productie voor farmaceutische producten als PET-cosmetica in dezelfde fabriek combineren, is Korea Ever-Power de aangewezen partij. isbm-blow-molding.com<\/a> kan adviseren over de juiste machinecombinatie.<\/p>\n

<\/p>\n

EP-ZQ110 Toepassingsgebieden<\/h2>\n
\n
\"HDPE<\/p>\n

Grootschalige farmaceutische productie<\/h3>\n

The ZQ110’s 24-cavity 10 ml and 14-cavity 100 ml configurations serve Korean large pharmaceutical manufacturers and Korean multi-national pharmaceutical contract packagers with annual volumes that require 20,000+ units per operating hour at the 10 ml format. Korean hospital supply chain packagers, Korean clinical trial material producers and Korean over-the-counter medicine container manufacturers all operate at the scale where the ZQ110 is the economically and technically correct single-machine solution.<\/p>\n<\/div>\n

\"HDPE<\/p>\n

Koreaanse nationale merk huishoudchemicali\u00ebn<\/h3>\n

HDPE- en PP-verpakkingen met 6-8 compartimenten van 500 ml en 4-5 compartimenten van 1.000 ml voor shampoo, conditioner, douchegel en vloeibaar wasmiddel van Koreaanse nationale merken, met productievolumes die voldoen aan de leveringscontracten van Koreaanse supermarktketens. Koreaanse fabrikanten van huishoudelijke chemicali\u00ebn, met een jaarlijkse productie van meer dan 50 miljoen eenheden van 500 ml per productlijn, beschouwen de ZQ110 doorgaans als de juiste investering in \u00e9\u00e9n machine wanneer de productie op ZQ80-schaal (5-6 compartimenten van 500 ml) niet aan de volume-eisen voldoet.<\/p>\n<\/div>\n

\"HDPE<\/p>\n

Voedselverpakkingen en industri\u00eble containers<\/h3>\n

Food-contact-grade HDPE and PP wide-mouth jars at 10 cavities 250 ml for Korean condiment, sauce and honey packaging; Korean cooking oil bottles at 6\u20138 cavities 500 ml; Korean agrochemical mixing containers at 4\u20135 cavities 1,000 ml; Korean industrial reagent containers at HDPE in high-volume formats. The ZQ110’s injection-moulded neck eliminates the parting-line base and neck seam defects that affect extrusion blow moulding at these volumes and neck closure types.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Essenti\u00eble bijpassende componenten voor de EP-ZQ110<\/h2>\n

\"Korea<\/p>\n