{"id":1311,"date":"2026-07-21T06:29:32","date_gmt":"2026-07-21T06:29:32","guid":{"rendered":"https:\/\/isbm-blow-molding.com\/?post_type=product&p=1311"},"modified":"2026-07-21T06:29:32","modified_gmt":"2026-07-21T06:29:32","slug":"ep-zq80-ibm-machine-alternative-to-uniloy-uib120","status":"publish","type":"product","link":"https:\/\/isbm-blow-molding.com\/ja\/product\/ep-zq80-ibm-machine-alternative-to-uniloy-uib120\/","title":{"rendered":"EP-ZQ80 IBM\u30de\u30b7\u30f3 \u2014 Uniloy UIB120\u306e\u4ee3\u66ff\u54c1"},"content":{"rendered":"
\n
\n

<\/p>\n

Selection Reference Notice:<\/strong> “Uniloy” and “UIB120” are trademarks of Uniloy (USA), referenced solely to help buyers identify the Korea Ever-Power EP-ZQ80 as a comparable alternative in the same IBM tonnage class. Korea Ever-Power does not manufacture, distribute or represent Uniloy products. All technical data below refers exclusively to the Korea Ever-Power EP-ZQ80.<\/div>\n

<\/p>\n

\u88fd\u54c1\u6982\u8981<\/h2>\n
\n
\n

\u305d\u306e Korea Ever-Power EP-ZQ80<\/a><\/strong> is a full European 3-station injection blow molding machine operating in the same IBM tonnage class as the Uniloy UIB120. With 800 kN injection clamping<\/strong> \u305d\u3057\u3066 466 g maximum injection weight<\/strong> at 55 mm screw, EP-ZQ80 brings European pressurised-clamping architecture \u2014 10\u201320% per-cycle energy reduction, servo rotary table indexing and a compact 2.0 m machine height \u2014 directly into the UIB120 market segment that Uniloy has served with American-style vertical-clamping IBM machines.<\/p>\n

The UIB120 class is where the height gap between American and European IBM architecture becomes most commercially consequential for Korean pharmaceutical buyers. American-style IBM machines in the UIB120-class routinely exceed 2.5\u20133.0 m height due to the vertical hydraulic clamping column required in this tonnage range. Korea Ever-Power EP-ZQ80 at 2.0 m height<\/strong> fits inside standard Korean pharmaceutical GMP cleanrooms with 2.4 m ceiling clearance, with 0.4 m remaining for barrel heater service access \u2014 a geometry UIB120-class machines typically cannot achieve without structural ceiling modification costing 50\u2013150 million KRW.<\/p>\n

\u305d\u306e 800 mm wide platen<\/strong> enables 20 cavities at 10 ml and 12 cavities at 100 ml \u2014 the full-scale Korean pharmaceutical and luxury K-beauty cosmetic IBM output range for the 80-tonne machine class. Explore the complete \u5c04\u51fa\u30d6\u30ed\u30fc\u6210\u5f62\u6a5f<\/a> range for all Korea Ever-Power IBM platforms.<\/p>\n<\/div>\n

\"EP-ZQ80<\/div>\n<\/div>\n

<\/p>\n

\n
\n
800 kN<\/div>\n
\u6ce8\u5c04\u30af\u30e9\u30f3\u30d7
\nUIB120 class<\/div>\n<\/div>\n
\n
466 g<\/div>\n
Max Shot (55mm)
\nSingle screw<\/div>\n<\/div>\n
\n
2.0 m<\/div>\n
Machine Height
\nGMP cleanroom fit<\/span><\/div>\n<\/div>\n
\n
20<\/div>\n
Cavities @ 10 ml
\n12 @ 100 ml<\/span><\/div>\n<\/div>\n
\n
55 kW<\/div>\n
\u7dcf\u96fb\u529b
\n3.5 s dry cycle<\/div>\n<\/div>\n
\n
10 T<\/div>\n
\u6a5f\u68b0\u91cd\u91cf
\n4.5 \u00d7 1.6 m<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\u6280\u8853\u4ed5\u69d8<\/h2>\n

\"EP-ZQ80<\/p>\n

All parameters sourced from Korea Ever-Power ZQ80 product specification data.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u30d1\u30e9\u30e1\u30fc\u30bf<\/th>\nEP-ZQ80 Value<\/th>\n<\/tr>\n<\/thead>\n
\u6a5f\u68b0\u30ec\u30a4\u30a2\u30a6\u30c8<\/td>\n3-station rotary \u2014 simultaneous Injection \/ Blow \/ Stripping<\/td>\n<\/tr>\n
\u30cd\u30b8\u5f84<\/td>\n55mm<\/td>\n<\/tr>\n
\u30b9\u30af\u30ea\u30e5\u30fcL\/D\u6bd4<\/td>\n22 : 1<\/td>\n<\/tr>\n
Max Injection Weight<\/td>\n466 g<\/td>\n<\/tr>\n
\u706b\u529b<\/td>\n15 kW<\/td>\n<\/tr>\n
Barrel Heating Zones<\/td>\n3 + N<\/td>\n<\/tr>\n
\u5c04\u51fa\u6210\u5f62\u6a5f\u306e\u578b\u7de0\u529b<\/td>\n800 kN<\/td>\n<\/tr>\n
Injection Open Stroke<\/td>\n250\u30df\u30ea\u30e1\u30fc\u30c8\u30eb<\/td>\n<\/tr>\n
\u30d6\u30ed\u30fc\u7de0\u3081\u4ed8\u3051\u529b<\/td>\n120 kN<\/td>\n<\/tr>\n
Blow Open Stroke<\/td>\n200 mm<\/td>\n<\/tr>\n
Rotary Table Lift<\/td>\n90 mm<\/td>\n<\/tr>\n
\u30b9\u30c8\u30ea\u30c3\u30d4\u30f3\u30b0\u30b9\u30c8\u30ed\u30fc\u30af<\/td>\n300\u30df\u30ea\u30e1\u30fc\u30c8\u30eb<\/td>\n<\/tr>\n
Mould Platen (L \u00d7 W)<\/td>\n800 \u00d7 400 mm<\/td>\n<\/tr>\n
\u91d1\u578b\u306e\u539a\u3055<\/td>\n250\u30df\u30ea\u30e1\u30fc\u30c8\u30eb<\/td>\n<\/tr>\n
\u6700\u5927\u30dc\u30c8\u30eb\u76f4\u5f84<\/td>\n180 mm<\/td>\n<\/tr>\n
\u30dc\u30c8\u30eb\u306e\u6700\u5927\u9ad8\u3055<\/td>\n300\u30df\u30ea\u30e1\u30fc\u30c8\u30eb<\/td>\n<\/tr>\n
Bottle Volume Range<\/td>\n1 \u2013 3000 ml<\/td>\n<\/tr>\n
Dry Cycle Time<\/td>\n3.5 s<\/td>\n<\/tr>\n
\u6cb9\u5727<\/td>\n14 MPa<\/td>\n<\/tr>\n
\u30e2\u30fc\u30bf\u30fc\u51fa\u529b<\/td>\n37 kW<\/td>\n<\/tr>\n
\u7dcf\u8a2d\u200b\u200b\u7f6e\u96fb\u529b<\/td>\n55 kW<\/td>\n<\/tr>\n
Operating Power<\/td>\n55\u201370% of rated (steady state)<\/td>\n<\/tr>\n
Compressed Air<\/td>\n0.7 \u2013 1.2 MPa \u00a0\/\u00a0 1.5 m\u00b3\/min<\/td>\n<\/tr>\n
Cooling Water<\/td>\n7.0 m\u00b3\/h \u00a0\/\u00a0 0.3 \u2013 0.4 MPa<\/td>\n<\/tr>\n
\u6a5f\u68b0\u5bf8\u6cd5\uff08\u9577\u3055\u00d7\u5e45\u00d7\u9ad8\u3055\uff09<\/td>\n4.5 \u00d7 1.6 \u00d7 2.0 m<\/td>\n<\/tr>\n
\u6a5f\u68b0\u91cd\u91cf<\/td>\n10 T<\/td>\n<\/tr>\n
\u9069\u5408\u6750\u6599<\/td>\nPP, PCTG, HDPE, LDPE, PS (lactic acid), ABS, EVA, PLA, corn starch resin<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Max Cavity Count by Bottle Volume \u2014 EP-ZQ80<\/h3>\n
\n\n\n\n\n\n
10ml<\/th>\n30ml<\/th>\n60ml<\/th>\n100ml<\/th>\n250ml<\/th>\n500ml<\/th>\n1000 ml<\/th>\n<\/tr>\n<\/thead>\n
20<\/td>\n18<\/td>\n14<\/td>\n12<\/td>\n8<\/td>\n5\uff5e6<\/td>\n3\uff5e4<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

For reference only. Source: Korea Ever-Power ZQ80 product specification data.<\/p>\n

<\/p>\n

EP-ZQ80 vs Uniloy UIB120 \u2014 Parameter Comparison<\/h2>\n

\"EP-ZQ80<\/p>\n

Korea Ever-Power ZQ80 catalogue data is compared against Uniloy UIB120-class reference. Detailed Uniloy UIB120 specifications \u2014 including screw diameter, injection weight, platen dimensions, power and machine footprint \u2014 are not publicly disclosed in Uniloy technical literature and are therefore noted as N\/A below. Korea Ever-Power does not guarantee the accuracy of any third-party specifications. Buyers should request complete UIB120 technical data directly from Uniloy for a full evaluation.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u30d1\u30e9\u30e1\u30fc\u30bf<\/th>\nKorea Ever-Power EP-ZQ80<\/th>\nUniloy UIB120 (Reference)<\/th>\n<\/tr>\n<\/thead>\n
IBM Tonnage Class<\/td>\n80T European<\/td>\nUIB120 class<\/td>\n<\/tr>\n
\u5c04\u51fa\u6210\u5f62\u6a5f\u306e\u578b\u7de0\u529b<\/td>\n800 kN<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
\u30cd\u30b8\u5f84<\/td>\n55mm<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Max Injection Weight<\/td>\n466 g<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Mould Platen (L \u00d7 W)<\/td>\n800 \u00d7 400 mm<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Machine Height<\/td>\n2.0 m<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Machine Width<\/td>\n1.6 m<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
\u6a5f\u68b0\u91cd\u91cf<\/td>\n10 T<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
\u7dcf\u8a2d\u200b\u200b\u7f6e\u96fb\u529b<\/td>\n55 kW<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Dry Cycle Time<\/td>\n3.5 s<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Max Cavities @ 10 ml<\/td>\n20<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Clamping Architecture<\/td>\nEuropean pressurised booster<\/td>\nAmerican hydraulic (main cylinder)<\/td>\n<\/tr>\n
Station Indexing<\/td>\nServo rotary table<\/td>\nCam-driven rotary<\/td>\n<\/tr>\n
PCTG SPI A1 Option<\/td>\nS136 \u2014 haze < 2%<\/td>\nStandard tooling only<\/td>\n<\/tr>\n
Certification<\/td>\nCE + ISO 9001:2015<\/td>\nCE<\/td>\n<\/tr>\n
Korea Service Base<\/td>\nAnsan-si, Gyeonggi-do<\/td>\nNorth America primary<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

\u24d8\u2002Uniloy UIB120 specifications are not available in publicly disclosed Uniloy technical literature. Korea Ever-Power EP-ZQ80 data is from the verified Korea Ever-Power ZQ80 product specification catalogue. Buyers should request UIB120 technical specifications directly from Uniloy for a complete numerical comparison.<\/p>\n

Buyers evaluating other Uniloy UIB models will find dedicated EP-ZQ40 vs UIB70, EP-ZQ60 vs UIB90, EP-ZQ110 vs UIB150 and EP-ZQ135 vs UIB180 comparison pages in the IBM machine replacement guide<\/a>.<\/p>\n

<\/p>\n

European IBM Architecture vs Uniloy UIB120-Class American Design<\/h2>\n
\n
\n
\ud83c\uddea\ud83c\uddfa EP-ZQ80 European Architecture<\/div>\n
\n
\u2713<\/span>2.0 m machine height<\/strong> \u2014 fits 2.4 m Korean pharmaceutical GMP cleanroom ceiling with 0.4 m service clearance<\/div>\n
\u2713<\/span>1.6 m width<\/strong> \u2014 five units per standard 10 m production bay with 0.8 m aisle clearance<\/div>\n
\u2713<\/span>Dedicated booster cylinder<\/strong> \u2014 hold force only, does not travel on open\/close; 10\u201320% lower energy per cycle<\/div>\n
\u2713<\/span>Servo rotary table indexing<\/strong> \u2014 consistent angular repeatability over high-cycle pharmaceutical campaigns<\/div>\n
\u2713<\/span>800 mm platen<\/strong> \u2014 20 cavities at 10 ml, 12 cavities at 100 ml<\/div>\n
\u2713<\/span>Korea Ansan-si service base<\/strong> \u2014 same-day spare parts, 24\/7 remote PLC support<\/div>\n<\/div>\n<\/div>\n
\n
\ud83c\uddfa\ud83c\uddf8 Uniloy UIB120-Class American Architecture<\/div>\n
\n
\u2717<\/span>Tall vertical profile from main hydraulic clamping column \u2014 typically exceeds 2.4\u20133.0 m height in UIB120 class<\/div>\n
\u2717<\/span>Wide footprint from hydraulic system layout \u2014 limits machine density per Korean pharmaceutical production bay<\/div>\n
\u2717<\/span>Main hydraulic cylinder performs both clamping hold AND mould open\/close travel \u2014 higher energy per cycle<\/div>\n
\u2717<\/span>Cam-driven indexing \u2014 mechanical play accumulates over high-cycle-count pharmaceutical campaigns<\/div>\n
\u2717<\/span>Platen geometry not published \u2014 cavity count at 10 ml and 100 ml not available for direct comparison<\/div>\n
\u2717<\/span>North America primary service network \u2014 longer Korean on-site response and spare parts lead times<\/div>\n<\/div>\n<\/div>\n<\/div>\n

Over a 10-year pharmaceutical IBM machine lifecycle, these architectural differences compound into measurable total cost of ownership advantages for EP-ZQ80 buyers in Korean GMP cleanroom environments: lower facility modification cost at installation, lower electricity cost per thousand bottles, and faster in-country service response at every maintenance event.<\/p>\n

<\/p>\n

Core Advantages of EP-ZQ80 in the UIB120 Class<\/h2>\n
\n
\n
\ud83d\udd25 800 kN \u2014 Full 80T European Class<\/div>\n

800 kN booster clamping delivered without vertical cylinder travel on every cycle. At 12 cavities for 100 ml pharmaceutical HDPE production at 35 g per preform (420 g total within 466 g limit) and 20 cavities for 10 ml PCTG dropper vials, EP-ZQ80 covers the full UIB120-class application range at industry-standard output rates.<\/p>\n<\/div>\n

\n
\ud83c\udfd7 2.0 m Height \u2014 Pharmaceutical GMP Native<\/div>\n

EP-ZQ80 at 2.0 m is the only IBM machine in the UIB120 class that fits standard Korean pharmaceutical GMP cleanrooms with 2.4 m ceilings without structural ceiling modification. UIB120-class American IBM machines typically require 3.0+ m ceiling clearance in this tonnage range. The 2.0 m height is the single most decisive specification for Korean pharmaceutical GMP cleanroom IBM buyers at the 80-tonne class.<\/p>\n<\/div>\n

\n
\ud83d\udcc8 20 Cavities at 10ml \u2014 Maximum K-Beauty Output<\/div>\n

800 mm platen enables 20 mandrel positions at 10 ml format \u2014 the highest cavity count available in the 80-tonne IBM class. For Korean K-beauty luxury dropper vials at 10\u201330 ml where cost per bottle is determined by cavities per machine, EP-ZQ80’s 20-cavity configuration at this machine class delivers the lowest cost per bottle of any single machine in the UIB120 tonnage range, including UIB120-class machines with unpublished but typically narrower platen configurations.<\/p>\n<\/div>\n

\n
\ud83d\udc8e S136 SPI A1 \u2014 PCTG Haze < 2%<\/div>\n

S136 SPI A1 stainless injection cavities and blow moulds (Ra \u2264 0.010 \u03bcm) deliver PCTG haze 0.8\u20131.6% ASTM D1003 at 0.5\u20130.6 mm wall \u2014 verified on Korea Ever-Power ZQ-series trials. Uniloy UIB120-class standard tooling does not include this mould steel grade. At 20-cavity scale for 10 ml PCTG eye serum droppers, EP-ZQ80 with S136 SPI A1 produces approximately 20,000\u201320,600 glass-look crystal-clear bottles per hour.<\/p>\n<\/div>\n

\n
\u26a1 10\u201320% Lower Energy + Korea Service<\/div>\n

European pressurised-clamping delivers 10\u201320% lower energy per cycle versus conventional UIB120-class American hydraulic architecture. Total installed power 55 kW at 55\u201370% steady-state utilisation (30.3\u201338.5 kW actual consumption during pharmaceutical PP production). Korea Ever-Power Ansan-si, Gyeonggi-do service base provides same-day Korean spare parts dispatch and 24\/7 remote PLC VPN diagnostic support with 2-hour software response SLA.<\/p>\n<\/div>\n

\n
\ud83d\udcdd CE + ISO 9001:2015 + Full GMP Package<\/div>\n

Every EP-ZQ80 ships with CE marking, ISO 9001:2015 certificate, FAT report, PP food-contact documentation (Korean MFDS + FDA 21 CFR + EU 10\/2011), PCTG material compliance and IQ\/OQ documentation template. Warranty 12 months from final acceptance at buyer’s facility \u2014 not from bill-of-lading date.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Application Scenarios<\/h2>\n

\"\u30dc\u30c8\u30eb\u30bf\u30a4\u30d7-1\"<\/p>\n

\n
\n
\ud83d\udc8a Pharmaceutical \u2014 High-Volume GMP Primary Packaging<\/div>\n

PP and HDPE tablet, syrup and oral liquid bottles at 30\u20131000 ml. 12 cavities at 100 ml pharmaceutical production within Korean MFDS GMP cleanroom environments where EP-ZQ80’s 2.0 m height is the decisive installation qualifier. Closed injection-to-stripping cycle; \u00b10.05 mm neck thread tolerance; 100% cap-seal compliance. Korean MFDS, FDA 21 CFR and EU GMP documentation package supplied at programme commencement.<\/p>\n<\/div>\n

\n
\u2728 K-Beauty Luxury Cosmetic \u2014 20-Cavity Commercial Scale<\/div>\n

20 cavities at 10 ml and 18 cavities at 30 ml PCTG crystal-clear eye serum droppers, facial essence vials and premium nail oil dropper bottles with S136 SPI A1 glass-look optical quality. EP-ZQ80 is the IBM machine for Korean luxury K-beauty brands scaling from pilot (EP-ZQ60, 14 cavities at 10 ml) to full commercial launch requiring 30+ million dropper vials per year from a single machine.<\/p>\n<\/div>\n

\n
\ud83d\udca7 Daily Chemical \u2014 High-Volume PP and PCTG<\/div>\n

PP shampoo, body wash, hand sanitiser and fragrance body mist bottles at 100\u2013500 ml in 5\u201312 cavity configurations. At 466 g shot weight, EP-ZQ80 supports 8 cavities at 500 ml PP shampoo (55 g per bottle, 440 g total). Five EP-ZQ80 units per 10 m production bay at 1.6 m width with 0.8 m aisles versus four UIB120-class units at typical wider machine profiles.<\/p>\n<\/div>\n

\n
\ud83c\udf3f Food Supplement and Health \u2014 PP and HDPE Large-Format<\/div>\n

PP and HDPE supplement capsule, probiotic and vitamin containers at 100\u20131000 ml in 4\u201312 cavity configurations. Korea Ever-Power food-contact documentation (Korean MFDS, FDA 21 CFR 177.1520, EU 10\/2011) supplied at commercial programme commencement.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

EP-ZQ Series Selector \u2014 Uniloy UIB Reference<\/h2>\n

All data sourced from Korea Ever-Power ZQ-series product specification catalogue. Uniloy UIB model designations are cited for buyer reference only.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n
\u30d1\u30e9\u30e1\u30fc\u30bf<\/th>\nEP-ZQ40<\/th>\nEP-ZQ60<\/th>\nEP-ZQ80<\/th>\nEP-ZQ110<\/th>\nEP-ZQ135<\/th>\n<\/tr>\n<\/thead>\n
\u6ce8\u5c04\u30af\u30e9\u30f3\u30d7<\/td>\n400 kN<\/td>\n600 kN<\/td>\n800 kN<\/td>\n1,100 kN<\/td>\n1,350 kN<\/td>\n<\/tr>\n
Max Shot<\/td>\n190\/260 g<\/td>\n260\/383 g<\/td>\n466 g<\/td>\n540g<\/td>\n650 g<\/td>\n<\/tr>\n
\u8eab\u9577<\/td>\n1.7 m<\/td>\n1.8 m<\/td>\n2.0 m<\/td>\n2.2 m<\/td>\n2.4 m<\/td>\n<\/tr>\n
\u866b\u6b6f\u6cbb\u7642\u7528 @10ml<\/td>\n9<\/td>\n14<\/td>\n20<\/td>\n24<\/td>\n30<\/td>\n<\/tr>\n
Cavities @100ml<\/td>\n4<\/td>\n8<\/td>\n12<\/td>\n14<\/td>\n18<\/td>\n<\/tr>\n
\u7dcf\u96fb\u529b<\/td>\n20 kW<\/td>\n37 kW<\/td>\n55 kW<\/td>\n80 kW<\/td>\n95 kW<\/td>\n<\/tr>\n
Uniloy UIB Ref.<\/td>\nUIB70<\/td>\nUIB90<\/td>\nUIB120<\/td>\nUIB150<\/td>\nUIB180<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Source: Korea Ever-Power ZQ-series product specification data. Uniloy UIB designations are for buyer reference only.<\/p>\n

<\/p>\n

\u3088\u304f\u3042\u308b\u8cea\u554f<\/h2>\n
\n
\n

Q1: Can Uniloy UIB120 mould tooling be transferred to the EP-ZQ80?<\/p>\n

Not without assessment. Uniloy UIB120-class mould systems are built to American IBM tooling standards that differ from Korea Ever-Power EP-ZQ80 platen dimensions (800 \u00d7 400 mm), mandrel pitch, mould thickness (250 mm) and bolt-hole configuration. UIB120-class tooling standards are also not publicly documented, making direct compatibility assessment dependent on the buyer providing UIB120 mould base drawings to Korea Ever-Power for dimensional comparison. Send UIB120 mould base drawings for a compatibility review \u2014 we advise within 5 working days at no cost.<\/p>\n<\/div>\n

\n

Q2: Why is EP-ZQ80 at 2.0 m height when UIB120-class machines are typically much taller?<\/p>\n

Uniloy UIB120-class machine height reflects the American-style vertical hydraulic clamping architecture that scales upward in height as tonnage increases \u2014 because the main clamping cylinder grows proportionally with required force and requires vertical travel clearance on every open\/close cycle. Korea Ever-Power EP-ZQ80 uses a horizontal European pressurised-clamping layout where the booster cylinder provides 800 kN clamping hold force without vertical travel, allowing the 2.0 m machine profile that remains constant across the EP-ZQ platform from EP-ZQ40 (1.7 m) through EP-ZQ135 (2.4 m) \u2014 a gradual height increase versus the steep height-to-tonnage ratio typical of UIB-class American IBM machines.<\/p>\n<\/div>\n

\n

Q3: What is the EP-ZQ80 machine and mould tooling lead time?<\/p>\n

Machine: 55\u201370 working days from order confirmation and deposit. Mould tooling: 45\u201355 working days (H13 SPI B1) or 60\u201375 working days (S136 SPI A1 for 20-cavity PCTG precision tooling). Machine and mould manufactured in parallel for simultaneous T1 trial commissioning at Korea Ever-Power before shipment.<\/p>\n<\/div>\n

\n

Q4: How does EP-ZQ80 servo rotary table indexing compare to UIB120-class cam-driven indexing?<\/p>\n

EP-ZQ80 servo rotary table maintains consistent angular positioning repeatability throughout the machine’s operating life using servo motor-driven precision. UIB120-class cam-driven indexing mechanisms accumulate mechanical play at the cam and follower contact surfaces over high-cycle-count production \u2014 introducing angular variance that affects preform-to-blow-cavity alignment and eventually results in wall thickness distribution inconsistency across the bottle body. At the UIB120 class production volumes (60\u2013200 million bottles per year at 100 ml), this wear accumulation occurs faster than at lower tonnage classes, making EP-ZQ80’s servo indexing advantage more commercially significant at UIB120-class production scale.<\/p>\n<\/div>\n

\n

Q5: Does EP-ZQ80 at 2.0 m height fit Korean pharmaceutical GMP cleanrooms with 2.4 m ceiling?<\/p>\n

Yes, with 0.4 m overhead clearance. This 0.4 m clearance is the minimum workable clearance for barrel heater element access and hydraulic system inspection above the machine. For cleanrooms with 2.7 m or higher ceiling, EP-ZQ80 has comfortable 0.7+ m clearance satisfying all GMP facility IQ\/OQ overhead maintenance access requirements without ceiling modification. UIB120-class machines at typical 2.5\u20133.5 m height cannot be installed in 2.4 m or 2.7 m ceiling cleanrooms \u2014 and require ceiling modification at 3.0 m ceiling cleanrooms (adding 0.5+ m for minimum service clearance above the machine).<\/p>\n<\/div>\n

\n

Q6: What pharmaceutical GMP documentation does Korea Ever-Power provide with EP-ZQ80?<\/p>\n

Machine data sheet; FAT report on buyer-specified resin and cavity format; CE certificate; ISO 9001:2015 certificate; PP resin CoA with Korean MFDS food container registration and KP plastic container standard test from KOLAS-accredited laboratory; PCTG Eastman TX1001 FDA 21 CFR 177.2490 food contact letter + EU 10\/2011 Declaration of Conformity. IQ\/OQ documentation template available on request.<\/p>\n<\/div>\n

\n

Q7: What after-sales service is available in Korea for EP-ZQ80?<\/p>\n

Korea Ever-Power Ansan-si, Gyeonggi-do service base: one week on-site commissioning and operator training at buyer’s facility; 24\/7 remote PLC VPN diagnostic support for 90 days post-commissioning with 2-hour software response SLA; same-day Korean spare parts dispatch for common wear items; scheduled preventive maintenance visits on annual service contract. This in-country service response capability versus Uniloy’s North America-primary service network gives Korean pharmaceutical buyers measurably faster machine uptime restoration at every service event.<\/p>\n<\/div>\n

\n

Q8: What PCTG optical quality does EP-ZQ80 with S136 SPI A1 tooling achieve for luxury cosmetic production?<\/p>\n

0.8\u20131.6% ASTM D1003 integrating sphere haze at 0.5\u20130.6 mm body wall, verified on Korea Ever-Power ZQ-series T1 trials with PCTG Eastman TX1001 at 252 \u00b0C barrel and 20 \u00b0C blow mould cooling water. This optical quality grade \u2014 below the 2% threshold specified by Korean luxury K-beauty cosmetic eye serum and nail oil dropper vial brands \u2014 is achievable at the full 20-cavity scale of EP-ZQ80 with S136 SPI A1 tooling. Uniloy UIB120-class standard H13 tooling does not include this mould steel grade as a published option.<\/p>\n<\/div>\n

\n

Q9: Which Korea Ever-Power model replaces Uniloy UIB150 for buyers needing to scale beyond EP-ZQ80?<\/p>\n

EP-ZQ110 (1,100 kN, screw 65 mm, max shot 540 g, platen 1100 \u00d7 460 mm, total power 80 kW, machine 5.0 \u00d7 1.8 \u00d7 2.2 m, 15 T) operates in the Uniloy UIB150 class. Dedicated comparison page in the IBM machine replacement guide<\/a>.<\/p>\n<\/div>\n

\n

Q10: Does Korea Ever-Power EP-ZQ80 carry CE marking?<\/p>\n

Yes. CE marking with Declaration of Conformity to the relevant EU Machinery Directive is standard on every EP-ZQ80. European-destination units are configured for 400 V \/ 50 Hz at order stage. Full CE documentation package available for review before order confirmation on request.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Considering a Uniloy UIB120-class IBM machine alternative?<\/h2>\n

Send Korea Ever-Power your bottle drawing, resin grade, required cavity count and annual production volume. We return a full feasibility report within 48 hours \u2014 EP-ZQ80 configuration, projected output per hour, mould tooling lead time and transparent machine quotation.<\/p>\n

\ud83d\udce7 Send Enquiry<\/a>
\n\ud83d\udcc4 Request Quote Form<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

EP-ZQ80 is a 3-station European injection blow molding machine operating in the same IBM tonnage class as the Uniloy UIB120. Rated at 800 kN injection clamping force and 466 g maximum injection weight (55 mm screw). Machine height 2.0 m fits Korean pharmaceutical GMP cleanrooms with 2.4 m ceiling clearance \u2014 a defining installation advantage over taller American-style IBM machines in the UIB120 class. Machine width 1.6 m enables five units per standard 10 m production bay. Platen 800 \u00d7 400 mm. Up to 20 cavities at 10 ml, 12 cavities at 100 ml. Single 55 mm screw. Processes PP, PCTG, HDPE, LDPE, PS, ABS, EVA, PLA. S136 SPI A1 mould option: PCTG haze below 2%. Dry cycle 3.5 s, total power 55 kW, footprint 4.5 \u00d7 1.6 \u00d7 2.0 m, weight 10 T. CE + ISO 9001:2015. Brand references for buyer selection convenience only; Korea Ever-Power is not affiliated with Uniloy.<\/p>","protected":false},"featured_media":1004,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[28],"product_tag":[],"class_list":["post-1311","product","type-product","status-publish","has-post-thumbnail","product_cat-ibm-machine-replacement","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/isbm-blow-molding.com\/ja\/wp-json\/wp\/v2\/product\/1311","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/isbm-blow-molding.com\/ja\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/isbm-blow-molding.com\/ja\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/ja\/wp-json\/wp\/v2\/media\/1004"}],"wp:attachment":[{"href":"https:\/\/isbm-blow-molding.com\/ja\/wp-json\/wp\/v2\/media?parent=1311"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/ja\/wp-json\/wp\/v2\/product_brand?post=1311"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/ja\/wp-json\/wp\/v2\/product_cat?post=1311"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/ja\/wp-json\/wp\/v2\/product_tag?post=1311"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}