{"id":1306,"date":"2026-07-21T05:29:18","date_gmt":"2026-07-21T05:29:18","guid":{"rendered":"https:\/\/isbm-blow-molding.com\/?post_type=product&p=1306"},"modified":"2026-07-21T05:29:18","modified_gmt":"2026-07-21T05:29:18","slug":"ep-zq110-ibm-machine-replacement-for-bloma-ibm135","status":"publish","type":"product","link":"https:\/\/isbm-blow-molding.com\/fr\/product\/ep-zq110-ibm-machine-replacement-for-bloma-ibm135\/","title":{"rendered":"Machine IBM EP-ZQ110 \u2014 Remplacement pour Bloma IBM135"},"content":{"rendered":"
\n
\n

<\/p>\n

Avis de r\u00e9f\u00e9rence de s\u00e9lection\u00a0:<\/strong> “Bloma” and “IBM135” are trademarks of Bloma Co. (Korea), referenced solely to help buyers identify the Korea Ever-Power EP-ZQ110 as a comparable alternative. Korea Ever-Power does not manufacture, distribute or represent Bloma products. All technical data below refers exclusively to the Korea Ever-Power EP-ZQ110.<\/div>\n

<\/p>\n

Pr\u00e9sentation du produit<\/h2>\n
\n

Le Cor\u00e9e Ever-Power EP-ZQ110<\/a><\/strong> and Bloma IBM135 share the same IBM class \u2014 110-to-135-tonne injection blow molding. The comparison is honest: Bloma IBM135-class holds advantages on clamping force (1,250 kN vs 1,100 kN, 14% higher) and screw-diameter-driven shot weight (560 g at 70 mm vs 540 g at 65 mm, 20 g more). EP-ZQ110 holds advantages on machine height (2.2 m vs 2.55 m, 14% shorter), platen width (1,100 mm vs 900 mm, 22% wider) and machine width (1.8 m vs not published \u2014 but the European architecture is structurally narrower at this tonnage).<\/p>\n

The height difference is the pharmaceutical installation qualifier. Bloma IBM135-class at 2.55 m exceeds the 2.4 m ceiling of standard Korean pharmaceutical GMP cleanrooms \u2014 the machine requires structural ceiling modification before installation. EP-ZQ110 at 2.2 m leaves 0.2\u20130.8 m overhead clearance in 2.4\u20133.0 m ceiling cleanrooms, passing GMP IQ\/OQ qualification without building works.<\/p>\n

\"Machine<\/p>\n

The platen width advantage defines output capacity: EP-ZQ110’s 1,100 mm wide platen enables 24 cavities at 10 ml versus Bloma IBM135’s 900 mm platen accommodating approximately 22 positions \u2014 and 14 cavities at 100 ml versus Bloma IBM135’s fewer positions from the 900 mm constraint. The complete machine de moulage par injection-soufflage<\/a> range covers all EP-ZQ platforms from 400 kN to 1,350 kN.<\/p>\n<\/div>\n

<\/p>\n

\n
\n
EP-ZQ110 LEADS<\/div>\n
2,2 m<\/div>\n
Hauteur
\nvs Bloma 2.55m (\u221214%)<\/span><\/div>\n<\/div>\n
\n
EP-ZQ110 LEADS<\/div>\n
1 100 mm<\/div>\n
Platen Width
\nvs Bloma 900mm (+22%)<\/span><\/div>\n<\/div>\n
\n
EP-ZQ110 LEADS<\/div>\n
24<\/div>\n
Cavities @ 10ml
\n14 @ 100ml<\/span><\/div>\n<\/div>\n
\n
BLOMA LEADS<\/div>\n
1,250 kN<\/div>\n
Clamp
\nvs EP 1,100 kN (+14%)<\/span><\/div>\n<\/div>\n
\n
BLOMA LEADS<\/div>\n
560 g<\/div>\n
Max Shot (70mm)
\nvs EP 540g at 65mm<\/span><\/div>\n<\/div>\n
\n
SIMILAR<\/div>\n
5,0 m<\/div>\n
Length (EP) vs
\nBloma not published<\/div>\n<\/div>\n<\/div>\n

Note:<\/strong> For applications requiring over 540 g injection weight (e.g. large-format bottles at high cavity count), Korea Ever-Power recommends EP-ZQ135<\/strong> (650 g, 70 mm screw, 1,300 \u00d7 500 mm platen, 1,350 kN).<\/p>\n

<\/p>\n

Sp\u00e9cifications techniques<\/h2>\n

\"EP-ZQ110<\/p>\n

Tous les param\u00e8tres proviennent des sp\u00e9cifications du produit Korea Ever-Power ZQ110.<\/p>\n

\n
\n
Injection<\/div>\n
\n
Diam\u00e8tre de la vis65 mm<\/strong><\/div>\n
Rapport L\/D22 : 1<\/strong><\/div>\n
Poids maximal des plombs540 g<\/strong><\/div>\n
Zones de chauffage3 + N<\/strong><\/div>\n<\/div>\n<\/div>\n
\n
Serrage<\/div>\n
\n
Pince d'injection1 100 kN<\/strong><\/div>\n
Pince de soufflage150 kN<\/strong><\/div>\n
Cycle de s\u00e9chage3,5 s<\/strong><\/div>\n<\/div>\n<\/div>\n
\n
Moule et sortie<\/div>\n
\n
Plateau (L \u00d7 l)1 100 \u00d7 460 mm<\/strong><\/div>\n
Diam\u00e8tre maximal de la bouteille200 mm<\/strong><\/div>\n
Max Height350 mm<\/strong><\/div>\n
Gamme de volume1 \u00e0 5000 ml<\/strong><\/div>\n<\/div>\n<\/div>\n
\n
Puissance et machines<\/div>\n
\n
Puissance totale80 kW<\/strong><\/div>\n
Air0,7\u20131,2 MPa \/ 2,0 m\u00b3\/min<\/strong><\/div>\n
Eau10,0 m\u00b3\/h<\/strong><\/div>\n
L \u00d7 l \u00d7 h5,0 \u00d7 1,8 \u00d7 2,2 m<\/strong><\/div>\n
Poids15 T<\/strong><\/div>\n<\/div>\n<\/div>\n<\/div>\n

Nombre maximal de cavit\u00e9s par volume de bouteille \u2014 EP-ZQ110<\/h3>\n
\n\n\n\n\n\n
10 ml<\/th>\n30 ml<\/th>\n60 ml<\/th>\n100 ml<\/th>\n250 ml<\/th>\n500 ml<\/th>\n1000 ml<\/th>\n<\/tr>\n<\/thead>\n
24<\/td>\n22<\/td>\n18<\/td>\n14<\/td>\n10<\/td>\n8<\/td>\n6<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

\u00c0 titre indicatif seulement. Source\u00a0: Fiche technique du produit Ever-Power ZQ110 (Cor\u00e9e).<\/p>\n

<\/p>\n

EP-ZQ110 vs Bloma IBM135 \u2014 Parameter Comparison<\/h2>\n

\"EP-ZQ110<\/p>\n

Korea Ever-Power ZQ110 catalogue data versus Bloma IBM135-class reference figures from the Korea Ever-Power IBM competitor analysis report. Bloma IBM135 machine length and width are not available in published data; height (2.55 m) and platen (900 \u00d7 480 mm) are confirmed reference figures. Bloma data cited for buyer selection convenience only.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Param\u00e8tre<\/th>\nEP-ZQ110<\/th>\nBloma IBM135 (Ref.)<\/th>\nDiff\u00e9rence<\/th>\n<\/tr>\n<\/thead>\n
Force de serrage d'injection<\/td>\n1 100 kN<\/td>\n1,250 kN<\/td>\nBloma +14%<\/td>\n<\/tr>\n
Diam\u00e8tre de la vis<\/td>\n65 mm<\/td>\n70 mm<\/td>\nBloma +5mm<\/td>\n<\/tr>\n
Poids d'injection maximal<\/td>\n540 g<\/td>\n560 g<\/td>\nBloma +20 g<\/td>\n<\/tr>\n
Plateau de moule (L \u00d7 l)<\/td>\n1 100 \u00d7 460 mm<\/td>\n900 \u00d7 480 mm<\/td>\n+22% wider<\/td>\n<\/tr>\n
Hauteur de la machine<\/td>\n2,2 m<\/td>\n2,55 m<\/td>\n\u221214%<\/td>\n<\/tr>\n
Longueur de la machine<\/td>\n5,0 m<\/td>\n\u2014 (non publi\u00e9)<\/td>\n\u2014<\/td>\n<\/tr>\n
Largeur de la machine<\/td>\n1,8 m<\/td>\n\u2014 (non publi\u00e9)<\/td>\n\u2014<\/td>\n<\/tr>\n
Poids de la machine<\/td>\n15 T<\/td>\n\u2014 (non publi\u00e9)<\/td>\n\u2014<\/td>\n<\/tr>\n
Puissance totale install\u00e9e<\/td>\n80 kW<\/td>\n\u2014 (non publi\u00e9)<\/td>\n10\u201320% moins\/cycle<\/td>\n<\/tr>\n
Caries \u00e0 10 ml<\/td>\n24<\/td>\n\u2014 (non publi\u00e9)<\/td>\n1,100mm vs 900mm<\/td>\n<\/tr>\n
Cycle de s\u00e9chage<\/td>\n3,5 s<\/td>\n\u2014 (non publi\u00e9)<\/td>\n\u2014<\/td>\n<\/tr>\n
Option PCTG SPI A1<\/td>\nS136 \u2014 brume < 2%<\/td>\nStandard H13 tooling<\/td>\nQualit\u00e9 luxe<\/td>\n<\/tr>\n
Certification<\/td>\nCE + ISO 9001:2015<\/td>\nCE<\/td>\n\u00c9gal<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Buyers comparing other Bloma models will find dedicated EP-ZQ40 vs IBM45, EP-ZQ60 vs IBM50 and EP-ZQ80 vs IBM85 comparison pages in the Guide de remplacement des machines IBM<\/a>.<\/p>\n

<\/p>\n

Why EP-ZQ110 Over Bloma IBM135 \u2014 And Where IBM135 Leads<\/h2>\n
\n
\n
01<\/div>\n
\n
2.2 m vs 2.55 m \u2014 The GMP Cleanroom Installation Threshold<\/div>\n

Bloma IBM135-class at 2.55 m height leaves only 0 m overhead clearance in a 2.4 m ceiling Korean pharmaceutical GMP cleanroom \u2014 it physically cannot be installed. In a 3.0 m ceiling cleanroom, it leaves 0.45 m overhead \u2014 below the 0.5 m minimum for barrel heater element replacement. EP-ZQ110 at 2.2 m leaves 0.2 m in a 2.4 m cleanroom (below minimum \u2014 requires 2.7+ m for GMP access compliance), 0.5 m in a 2.7 m cleanroom (exact minimum threshold), and 0.8 m in a 3.0 m cleanroom (comfortable). The practical threshold: for Korean pharmaceutical GMP cleanrooms with 2.7 m ceiling, EP-ZQ110 qualifies and Bloma IBM135-class does not. For 2.4 m ceiling cleanrooms, neither machine qualifies without modification \u2014 buyers should consider this in facility planning.<\/p>\n<\/div>\n<\/div>\n

\n
02<\/div>\n
\n
1,100 mm vs 900 mm Platen \u2014 22% Wider, 24 Cavities at 10ml<\/div>\n

EP-ZQ110 platen at 1,100 mm width versus Bloma IBM135’s 900 mm (22% wider) enables 2\u20134 additional mandrel positions at small bottle formats. At 10 ml format with 38 mm pitch: EP-ZQ110 at 1,100 mm accommodates 24 positions; Bloma IBM135 at 900 mm accommodates approximately 22 positions. The Korea Ever-Power ZQ110 specification confirms 24 cavities at 10 ml. At 100 ml format with 65 mm pitch: EP-ZQ110 at 1,100 mm accommodates 14 positions; Bloma IBM135 at 900 mm accommodates approximately 13 positions. EP-ZQ110 provides confirmed 14 cavities at 100 ml \u2014 giving one additional cavity per cycle versus Bloma IBM135’s 900 mm platen constraint at this format.<\/p>\n<\/div>\n<\/div>\n

\n
03<\/div>\n
\n
Shot Weight: 540 g vs 560 g \u2014 Functionally Equivalent for All Standard Applications<\/div>\n

Bloma IBM135-class at 70 mm screw reaches 560 g; EP-ZQ110 at 65 mm screw reaches 540 g \u2014 a 20 g difference that is functionally equivalent for every standard pharmaceutical, cosmetic and daily chemical IBM application in this tonnage class. At 14 cavities for 100 ml pharmaceutical HDPE production at 35 g per preform: total cavity shot weight = 490 g, within EP-ZQ110’s 540 g limit with 50 g headroom and within Bloma IBM135’s 560 g limit with 70 g headroom. The 20 g shot weight advantage of Bloma IBM135 does not change the cavity count or production rate for any standard IBM application at this tonnage. Only for applications requiring specifically above 540 g does Bloma IBM135’s 560 g provide a functional advantage over EP-ZQ110.<\/p>\n<\/div>\n<\/div>\n

\n
04<\/div>\n
\n
Bloma IBM135 Clamp Advantage: 1,250 kN vs 1,100 kN \u2014 Context Matters<\/div>\n

Bloma IBM135-class holds 1,250 kN injection clamping versus EP-ZQ110’s 1,100 kN \u2014 a 14% advantage that is real but contextually limited. At 14 cavities for 100 ml pharmaceutical HDPE production: EP-ZQ110 at 1,100 kN distributes 78.6 kN per injection cavity; Bloma IBM135 at 1,250 kN distributes 89.3 kN per cavity. This 10.7 kN per cavity difference is within the range where standard pharmaceutical PP and HDPE bottle IBM production \u2014 which typically requires 50\u201380 kN per injection cavity for neck thread dimensional compliance \u2014 operates comfortably on both machines. The practical clamping advantage of Bloma IBM135 only materialises for applications running consistently above 14 cavities at 100 ml where EP-ZQ110’s 1,100 kN per-cavity distribution falls below the application threshold \u2014 a scenario that is outside standard pharmaceutical IBM production at this tonnage class.<\/p>\n<\/div>\n<\/div>\n

\n
05<\/div>\n
\n
S136 SPI A1 Mould + 10\u201320% Lower Energy + Korea Service Base<\/div>\n

S136 SPI A1 injection cavities and blow moulds (Ra \u2264 0.010 \u03bcm) deliver PCTG haze 0.8\u20131.6% ASTM D1003 across all 24 cavity positions \u2014 the optical quality Korean luxury K-beauty brands specify and Bloma IBM135-class standard H13 tooling cannot achieve. European pressurised-clamping: 10\u201320% lower energy per cycle versus Bloma IBM135-class conventional hydraulic architecture. Total installed power 80 kW at 55\u201370% steady-state (44\u201356 kW actual consumption). Korea Ever-Power Ansan-si, Gyeonggi-do service base: same-day Korean spare parts dispatch and 24\/7 remote PLC VPN support with 2-hour SLA \u2014 in-country service response capability that is a practical advantage versus Bloma’s own service scheduling for Korean pharmaceutical buyers across all maintenance events.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

Sc\u00e9narios d'application<\/h2>\n

\"ZQ40-IBM-pour-Types-de-bouteilles\"<\/p>\n

\n
\n
\ud83d\udc8a<\/div>\n
Pharmaceutical \u2014 GMP High-Volume<\/div>\n

14 cavities at 100 ml pharmaceutical HDPE or PP production in Korean GMP cleanrooms with 2.7 m ceiling (EP-ZQ110 at 2.2 m leaves 0.5 m clearance; Bloma IBM135 at 2.55 m cannot qualify). At 35 g per preform \u00d7 14 cavities = 490 g within EP-ZQ110’s 540 g limit. Annual output: approximately 150\u2013160 million bottles per year at 100 ml, 3 shifts, per unit.<\/p>\n<\/div>\n

\n
\u2728<\/div>\n
K-Beauty Luxury Scale<\/div>\n

24 cavities at 10 ml PCTG eye serum droppers, 22 cavities at 30 ml facial serum vials with S136 SPI A1 glass-look tooling at 0.8\u20131.6% ASTM D1003 haze. EP-ZQ110’s 1,100 mm platen enables 2+ additional cavity positions versus Bloma IBM135’s 900 mm platen at 10 ml format. Bloma IBM135-class standard H13 tooling cannot achieve sub-2% PCTG haze.<\/p>\n<\/div>\n

\n
\ud83d\udca7<\/div>\n
Daily Chemical Mid-to-Large Format<\/div>\n

PP shampoo, body wash and conditioner at 100\u20131000 ml. 8 cavities at 500 ml (55 g per bottle, 440 g total within 540 g); 6 cavities at 1000 ml (80 g per bottle, 480 g within 540 g). Bloma IBM135 at 560 g provides only marginal additional shot weight headroom (560 g vs 540 g) that does not change cavity count at these formats.<\/p>\n<\/div>\n

\n
\ud83c\udf3f<\/div>\n
Food Supplement Large-Format<\/div>\n

PP and HDPE supplement capsule and vitamin containers at 250\u20135000 ml. 10 cavities at 250 ml (45 g per bottle, 450 g within 540 g); 8 cavities at 500 ml (55 g, 440 g within 540 g). For formats requiring total shot weight above 540 g, EP-ZQ135 (650 g) is recommended.<\/p>\n<\/div>\n<\/div>\n

\"EP-ZQ110<\/p>\n

S\u00e9lecteur de s\u00e9rie EP-ZQ<\/h2>\n

Toutes les donn\u00e9es proviennent du catalogue de sp\u00e9cifications des produits de la s\u00e9rie ZQ d'Ever-Power (Cor\u00e9e). Les d\u00e9signations des mod\u00e8les Bloma sont cit\u00e9es \u00e0 titre indicatif uniquement.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n
Param\u00e8tre<\/th>\nEP-ZQ40<\/th>\nEP-ZQ60<\/th>\nEP-ZQ80<\/th>\nEP-ZQ110<\/th>\nEP-ZQ135<\/th>\n<\/tr>\n<\/thead>\n
Pince d'injection<\/td>\n400 kN<\/td>\n600 kN<\/td>\n800 kN<\/td>\n1 100 kN<\/td>\n1 350 kN<\/td>\n<\/tr>\n
Max Shot<\/td>\n190\/260 g<\/td>\n260\/383 g<\/td>\n466 g<\/td>\n540 g<\/td>\n650 g<\/td>\n<\/tr>\n
Hauteur<\/td>\n1,7 m<\/td>\n1,8 m<\/td>\n2,0 m<\/td>\n2,2 m<\/td>\n2,4 m<\/td>\n<\/tr>\n
Platen Width<\/td>\n480 mm<\/td>\n600 mm<\/td>\n800 mm<\/td>\n1 100 mm<\/td>\n1,300 mm<\/td>\n<\/tr>\n
Caries \u00e0 10 ml<\/td>\n9<\/td>\n14<\/td>\n20<\/td>\n24<\/td>\n30<\/td>\n<\/tr>\n
Puissance totale<\/td>\n20 kW<\/td>\n37 kW<\/td>\n55 kW<\/td>\n80 kW<\/td>\n95 kW<\/td>\n<\/tr>\n
\u00c9quivalent Bloma<\/td>\nIBM45<\/td>\nIBM50<\/td>\nIBM85<\/td>\nIBM135<\/td>\n\u2014<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Source: Korea Ever-Power ZQ-series product specification data. Bloma designations are for buyer reference only.<\/p>\n

<\/p>\n

Foire aux questions<\/h2>\n
\n
\n

Q1: Will Bloma IBM135 mould tooling transfer to the EP-ZQ110?<\/p>\n

Possibly with assessment. Bloma IBM135 platen is 900 \u00d7 480 mm versus EP-ZQ110’s 1,100 \u00d7 460 mm \u2014 200 mm wider and 20 mm shorter on EP-ZQ110. The wider EP-ZQ110 platen may allow Bloma IBM135 mould tooling to be installed with a platen adapter plate in some cases, but mandrel pitch, mould thickness (EP-ZQ110 mould thickness on request) and bolt-hole configuration must be verified. Send Bloma IBM135 mould base drawings for a Korea Ever-Power compatibility assessment within 5 working days at no cost.<\/p>\n<\/div>\n

\n

Q2: Bloma IBM135 has 1,250 kN clamp vs EP-ZQ110’s 1,100 kN \u2014 is this a significant difference for pharmaceutical IBM?<\/p>\n

At 14 cavities for standard 100 ml pharmaceutical HDPE production: EP-ZQ110 at 1,100 kN distributes 78.6 kN per injection cavity; Bloma IBM135 at 1,250 kN distributes 89.3 kN per cavity. Standard pharmaceutical PP and HDPE IBM neck thread dimensional compliance (\u00b10.05 mm tolerance) requires approximately 50\u201380 kN per cavity depending on neck diameter and injection speed. EP-ZQ110 at 78.6 kN per cavity is within this range for 14 cavities at 100 ml. The Bloma IBM135 clamping advantage becomes practically meaningful only for applications running above 14 cavities at formats where cavity clamping requirement approaches 78.6 kN \u2014 a scenario outside standard Korean pharmaceutical IBM at this tonnage class.<\/p>\n<\/div>\n

\n

Q3: For which GMP cleanroom ceiling heights does EP-ZQ110 qualify but Bloma IBM135 does not?<\/p>\n

EP-ZQ110 at 2.2 m qualifies for cleanrooms with 2.7 m ceiling (0.5 m overhead \u2014 minimum threshold for barrel heater element service) and above. Bloma IBM135-class at 2.55 m requires at least 3.05 m ceiling clearance (2.55 m machine + 0.5 m minimum service overhead) \u2014 qualifying only for cleanrooms with 3.05 m+ ceilings. Most Korean pharmaceutical GMP cleanrooms are built with 2.7\u20133.0 m ceiling clearance. For cleanrooms in the 2.7\u20133.0 m ceiling range: EP-ZQ110 qualifies; Bloma IBM135-class does not without structural ceiling modification.<\/p>\n<\/div>\n

\n

Q4: When does Bloma IBM135’s 560g shot weight advantage over EP-ZQ110’s 540g actually matter?<\/p>\n

The Bloma IBM135 20 g shot weight advantage (560 g vs 540 g) matters only when total cavity shot weight falls in the 541\u2013560 g range \u2014 specifically when a combination of cavity count and preform weight produces total shot weight above 540 g but at or below 560 g. For example: 14 cavities at 40 g per preform = 560 g total (within Bloma IBM135’s 560 g limit; above EP-ZQ110’s 540 g limit). For this specific scenario, Bloma IBM135 runs 14 cavities while EP-ZQ110 is limited to 13 cavities. For all applications where total shot weight at target cavity count is at or below 540 g \u2014 which covers standard pharmaceutical IBM at 35 g per preform, 14 cavities (490 g) \u2014 the difference is zero.<\/p>\n<\/div>\n

\n

Q5: How does EP-ZQ110’s 1,100mm platen enable 24 cavities at 10ml when Bloma IBM135’s 900mm constrains?<\/p>\n

At 10 ml format with 38 mm mandrel centre-to-centre pitch: EP-ZQ110’s 1,100 mm effective platen accommodates 24 mandrel positions (24 \u00d7 38 mm = 912 mm, within 1,100 mm limit). Bloma IBM135’s 900 mm platen accommodates approximately 22 positions (22 \u00d7 38 mm = 836 mm, within 900 mm limit). The Korea Ever-Power ZQ110 specification confirms 24 cavities at 10 ml; Bloma IBM135’s cavity count at this format is not published. The 2-cavity difference at 10 ml format (24 vs 22) from EP-ZQ110’s wider platen translates to approximately 5 million additional dropper vials per year per machine at Korean K-beauty luxury cosmetic commercial production rates.<\/p>\n<\/div>\n

\n

Q6: What is the EP-ZQ110 machine and mould lead time?<\/p>\n

Machine\u00a0: 60 \u00e0 75 jours ouvrables \u00e0 compter de la confirmation de commande et du versement de l\u2019acompte. Outillage de moulage\u00a0: 50 \u00e0 60 jours ouvrables (H13 SPI B1) ou 65 \u00e0 80 jours ouvrables (S136 SPI A1 pour outillage de pr\u00e9cision PCTG 24 cavit\u00e9s). La machine et le moule sont fabriqu\u00e9s en parall\u00e8le pour une mise en service simultan\u00e9e (essai T1) chez Korea Ever-Power avant exp\u00e9dition.<\/p>\n<\/div>\n

\n

Q7: What GMP documentation does Korea Ever-Power provide with EP-ZQ110?<\/p>\n

Fiche technique machine\u00a0; rapport FAT (Factory Acceptance Test) sur r\u00e9sine et format de cavit\u00e9 sp\u00e9cifi\u00e9s par l\u2019acheteur\u00a0; certificat CE\u00a0; certificat ISO 9001:2015\u00a0; certificat d\u2019analyse de la r\u00e9sine PP avec enregistrement aupr\u00e8s du MFDS cor\u00e9en pour les contenants alimentaires et test de conformit\u00e9 \u00e0 la norme KP pour les contenants en plastique r\u00e9alis\u00e9 par un laboratoire accr\u00e9dit\u00e9 KOLAS\u00a0; lettre de contact alimentaire PCTG Eastman TX1001 FDA 21 CFR 177.2490 + d\u00e9claration de conformit\u00e9 UE 10\/2011. Mod\u00e8le de documentation IQ\/OQ sur demande.<\/p>\n<\/div>\n

\n

Q8: What after-sales service does Korea Ever-Power provide in Korea for EP-ZQ110?<\/p>\n

Korea Ever-Power Ansan-si, Gyeonggi-do: one week on-site commissioning and operator training; 24\/7 remote PLC VPN diagnostic support for 90 days post-commissioning with 2-hour software response SLA; same-day Korean spare parts dispatch; scheduled preventive maintenance on annual service contract. In-country service response at the EP-ZQ110 three-shift production scale \u2014 where each hour of unplanned downtime affects batch release timing and customer commitments \u2014 is a meaningful operational advantage versus Bloma IBM135-class service scheduling.<\/p>\n<\/div>\n

\n

Q9: Which Korea Ever-Power model should I consider if my application needs more than 540g shot weight?<\/p>\n

EP-ZQ135 (1,350 kN, screw 70 mm, max shot 650 g, platen 1,300 \u00d7 500 mm, total power 95 kW, machine 5.5 \u00d7 2.0 \u00d7 2.4 m, 18 T) is the recommended Korea Ever-Power model for applications requiring more than 540 g injection weight. EP-ZQ135 at 650 g covers all applications within the Bloma IBM135 560 g specification and applications where SUMA 135iB’s 76 mm \/ 770 g has been considered. For applications requiring shot weight above 650 g, contact Korea Ever-Power engineering for a configuration discussion. Comparison pages for EP-ZQ135 vs Jomar IBM175, SUMA 175iB and Uniloy UIB180 are in the Guide de remplacement des machines IBM<\/a>.<\/p>\n<\/div>\n

\n

Q10: Does Korea Ever-Power EP-ZQ110 carry CE marking?<\/p>\n

Yes. CE marking with Declaration of Conformity to the relevant EU Machinery Directive is standard on every EP-ZQ110. European-destination units configured for 400 V \/ 50 Hz at order stage. Full CE documentation package available for review before order confirmation on request.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Considering EP-ZQ110 as your Bloma IBM135 replacement?<\/h2>\n

Send Korea Ever-Power your bottle drawing, resin grade, required cavity count and annual production volume. If your shot weight requirement exceeds 540 g, we will recommend EP-ZQ135 instead. All feasibility reports returned within 48 hours.<\/p>\n

\ud83d\udce7 Envoyer une demande<\/a>
\n\ud83d\udcc4 Formulaire de demande de devis<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

EP-ZQ110 is a 3-station European injection blow molding machine with 1,100 kN injection clamping and 540 g maximum injection weight (65 mm screw). Bloma IBM135-class: 1,250 kN (14% higher) clamping, 70 mm screw, 560 g shot (20 g more). The key differentiators favour EP-ZQ110: machine height 2.2 m versus Bloma IBM135-class 2.55 m (\u221214%), fitting Korean pharmaceutical GMP cleanrooms with 2.4 m ceiling clearance where IBM135-class cannot; platen width 1,100 mm versus 900 mm (+22%), enabling 24 cavities at 10 ml; machine width 1.8 m enabling five units per 12 m production bay. Shot weight is close (540 g vs 560 g); clamping favours Bloma IBM135 (1,250 kN vs 1,100 kN). For applications requiring over 540 g, EP-ZQ135 (650 g) is recommended. Processes PP, PCTG, HDPE, LDPE, PS, ABS, EVA, PLA. S136 SPI A1 mould: PCTG haze below 2%. Dry cycle 3.5 s, total power 80 kW, footprint 5.0 \u00d7 1.8 \u00d7 2.2 m, weight 15 T. CE + ISO 9001:2015.<\/p>","protected":false},"featured_media":1005,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[28],"product_tag":[],"class_list":["post-1306","product","type-product","status-publish","has-post-thumbnail","product_cat-ibm-machine-replacement","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/isbm-blow-molding.com\/fr\/wp-json\/wp\/v2\/product\/1306","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/isbm-blow-molding.com\/fr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/isbm-blow-molding.com\/fr\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/fr\/wp-json\/wp\/v2\/media\/1005"}],"wp:attachment":[{"href":"https:\/\/isbm-blow-molding.com\/fr\/wp-json\/wp\/v2\/media?parent=1306"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/fr\/wp-json\/wp\/v2\/product_brand?post=1306"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/fr\/wp-json\/wp\/v2\/product_cat?post=1306"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/fr\/wp-json\/wp\/v2\/product_tag?post=1306"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}