{"id":1291,"date":"2026-07-20T06:11:08","date_gmt":"2026-07-20T06:11:08","guid":{"rendered":"https:\/\/isbm-blow-molding.com\/?post_type=product&p=1291"},"modified":"2026-07-20T06:11:08","modified_gmt":"2026-07-20T06:11:08","slug":"ep-zq60-ibm-machine-alternative-to-uniloy-uib90","status":"publish","type":"product","link":"https:\/\/isbm-blow-molding.com\/fr\/product\/ep-zq60-ibm-machine-alternative-to-uniloy-uib90\/","title":{"rendered":"Machine IBM EP-ZQ60 \u2014 Alternative \u00e0 Uniloy UIB90"},"content":{"rendered":"
\n
\n

<\/p>\n

Avis de r\u00e9f\u00e9rence de s\u00e9lection\u00a0:<\/strong> “Uniloy” and “UIB90” are trademarks of Uniloy (USA), referenced solely to help buyers identify the Korea Ever-Power EP-ZQ60 as a comparable alternative in the same IBM tonnage class. Korea Ever-Power does not manufacture, distribute or represent Uniloy products. All technical data below refers exclusively to the Korea Ever-Power EP-ZQ60.<\/div>\n

<\/p>\n

Pr\u00e9sentation du produit<\/h2>\n

Le Korea Ever-Power EP-ZQ60<\/a><\/strong> is a full European 3-station injection blow molding machine operating in the same tonnage class as the Uniloy UIB90. At 600 kN injection clamping force<\/strong> and a maximum injection weight of 383 g<\/strong> with the 50 mm screw option, the EP-ZQ60 brings the European pressurised-clamping architecture \u2014 with its 10\u201320% per-cycle energy reduction and compact machine profile \u2014 directly into the UIB90 market segment that Uniloy has traditionally served with American-style vertical-clamping IBM machine design.<\/p>\n

The critical practical difference is machine height. American-style IBM machines in the UIB90 class are characterised by tall vertical profiles that originate from the upright hydraulic clamping cylinder arrangement typical of this machine generation. Korea Ever-Power EP-ZQ60 at 1.8 m machine height<\/strong> fits inside standard Korean pharmaceutical GMP cleanrooms with 2.4 m ceiling clearance, leaving 0.6 m of service overhead \u2014 a geometry that UIB90-class machines typically cannot achieve without structural ceiling modification. At 1.4 m machine width<\/strong>, EP-ZQ60 also allows higher machine density per production bay than wider UIB90-class machines, directly impacting the production capacity of a fixed factory floor investment.<\/p>\n

\"Machine<\/p>\n

The 3-station simultaneous cycle (Injection \u2192 Blow \u2192 Stripping) achieves a cycle de s\u00e9chage de 3,5 secondes<\/strong>. No human hand contacts the preform or finished bottle, satisfying pharmaceutical GMP cleanroom handling requirements. The servo rotary table indexes mandrels between stations with precise servo positioning \u2014 measurably more repeatable over high-cycle-count pharmaceutical production campaigns than cam-driven indexing mechanisms typical in UIB90-class machine designs. Material range covers PP, PCTG, HDPE, LDPE, PS, ABS, EVA, PLA and corn starch environmental resin. The optional Acier \u00e0 moules S136 SPI A1<\/strong> (Ra \u2264 0.010 \u03bcm) delivers PCTG haze below 2 percent for luxury Korean K-beauty cosmetic serum dropper vials. Explore the complete machine de moulage par injection-soufflage<\/a> catalogue for all EP-ZQ platform options from 400 kN through 1,350 kN.<\/p>\n

<\/p>\n

\n
\n
600 kN<\/div>\n
Injection Clamp
\nUIB90 class<\/div>\n<\/div>\n
\n
383 g<\/div>\n
Max Shot (50mm)
\n260g at 45mm<\/div>\n<\/div>\n
\n
1,8 m<\/div>\n
Hauteur de la machine
\nGMP cleanroom fit<\/div>\n<\/div>\n
\n
14<\/div>\n
Caries \u00e0 10 ml
\n8 @ 100 ml<\/div>\n<\/div>\n
\n
37 kW<\/div>\n
Puissance totale
\n3.5 s dry cycle<\/div>\n<\/div>\n
\n
5 T<\/div>\n
Poids de la machine
\n3.8 \u00d7 1.4 m<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

Sp\u00e9cifications techniques<\/h2>\n

\"EP-ZQ60<\/p>\n

All parameters sourced from Korea Ever-Power ZQ60 product specification data. Screw selection (45 mm or 50 mm) is confirmed against your resin MFR and target preform weight before the quote is finalised.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Param\u00e8tre<\/th>\nEP-ZQ60 Value<\/th>\n<\/tr>\n<\/thead>\n
Agencement de la machine<\/td>\nRotatif \u00e0 3 stations \u2014 Injection \/ Soufflage \/ D\u00e9capage simultan\u00e9s<\/td>\n<\/tr>\n
Diam\u00e8tre de la vis<\/td>\n45 mm (standard) \/ 50 mm (option)<\/td>\n<\/tr>\n
Rapport L\/D de la vis<\/td>\n22 : 1<\/td>\n<\/tr>\n
Poids d'injection<\/td>\n260 g (45 mm) \/ 383 g (50 mm)<\/td>\n<\/tr>\n
Puissance de chauffage<\/td>\n10 kW<\/td>\n<\/tr>\n
Zones de chauffage des barils<\/td>\n3 + N<\/td>\n<\/tr>\n
Force de serrage par injection<\/td>\n600 kN<\/td>\n<\/tr>\n
Injection \u00e0 course ouverte<\/td>\n200 mm<\/td>\n<\/tr>\n
Force de serrage par soufflage<\/td>\n90 kN<\/td>\n<\/tr>\n
Coup d'ouverture de souffle<\/td>\n170 mm<\/td>\n<\/tr>\n
Table \u00e9l\u00e9vatrice rotative<\/td>\n80 mm<\/td>\n<\/tr>\n
Coup de stripping<\/td>\n260 mm<\/td>\n<\/tr>\n
Plateau de moule (L \u00d7 l)<\/td>\n600 \u00d7 390 mm<\/td>\n<\/tr>\n
\u00c9paisseur du moule<\/td>\n220 mm<\/td>\n<\/tr>\n
Diam\u00e8tre maximal de la bouteille<\/td>\n150 mm<\/td>\n<\/tr>\n
Hauteur maximale de la bouteille<\/td>\n260 mm<\/td>\n<\/tr>\n
Gamme de volumes de bouteilles<\/td>\n1 \u2013 2000 ml<\/td>\n<\/tr>\n
Dur\u00e9e du cycle de s\u00e9chage<\/td>\n3,5 s<\/td>\n<\/tr>\n
Pression hydraulique<\/td>\n14 MPa<\/td>\n<\/tr>\n
Puissance du moteur<\/td>\n22 kW<\/td>\n<\/tr>\n
Puissance totale install\u00e9e<\/td>\n37 kW<\/td>\n<\/tr>\n
Puissance de fonctionnement<\/td>\n55\u201370% de puissance nominale (r\u00e9gime permanent)<\/td>\n<\/tr>\n
Air comprim\u00e9<\/td>\n0.7 \u2013 1.2 MPa \u00a0\/\u00a0 1.0 m\u00b3\/min<\/td>\n<\/tr>\n
Eau de refroidissement<\/td>\n5.0 m\u00b3\/h \u00a0\/\u00a0 0.3 \u2013 0.4 MPa<\/td>\n<\/tr>\n
Dimensions de la machine (L \u00d7 l \u00d7 H)<\/td>\n3.8 \u00d7 1.4 \u00d7 1.8 m<\/td>\n<\/tr>\n
Poids de la machine<\/td>\n5 T<\/td>\n<\/tr>\n
Mat\u00e9riaux compatibles<\/td>\nPP, PCTG, PEHD, PEBD, PS (acide lactique), ABS, EVA, PLA, r\u00e9sine d'amidon de ma\u00efs<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Max Cavity Count by Bottle Volume \u2014 EP-ZQ60<\/h3>\n
\n\n\n\n\n\n
10 ml<\/th>\n30 ml<\/th>\n60 ml<\/th>\n100 ml<\/th>\n250 ml<\/th>\n500 ml<\/th>\n1000 ml<\/th>\n<\/tr>\n<\/thead>\n
14<\/td>\n12<\/td>\n10<\/td>\n8<\/td>\n5<\/td>\n3<\/td>\n2<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

For reference only. Source: Korea Ever-Power ZQ60 product specification data.<\/p>\n

<\/p>\n

EP-ZQ60 vs Uniloy UIB90 \u2014 Parameter Comparison<\/h2>\n

\"EP-ZQ60<\/p>\n

Korea Ever-Power ZQ60 catalogue data is compared against Uniloy UIB90-class reference. Detailed Uniloy UIB90 specifications including screw diameter, injection weight, platen size and power are not publicly disclosed in Uniloy technical literature and are therefore noted as N\/A below. Korea Ever-Power does not guarantee the accuracy of any third-party specifications. Buyers should request complete UIB90 technical data directly from Uniloy for a full evaluation.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Param\u00e8tre<\/th>\nKorea Ever-Power EP-ZQ60<\/th>\nUniloy UIB90 (Reference)<\/th>\n<\/tr>\n<\/thead>\n
IBM Tonnage Class<\/td>\n60T European<\/td>\nUIB90 class<\/td>\n<\/tr>\n
Force de serrage par injection<\/td>\n600 kN<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Diam\u00e8tre de la vis<\/td>\n45 \/ 50 mm<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Poids d'injection maximal<\/td>\n260 \/ 383 g<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Plateau de moule (L \u00d7 l)<\/td>\n600 \u00d7 390 mm<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Hauteur de la machine<\/td>\n1,8 m<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Largeur de la machine<\/td>\n1.4 m<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Poids de la machine<\/td>\n5 T<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Puissance totale install\u00e9e<\/td>\n37 kW<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Dur\u00e9e du cycle de s\u00e9chage<\/td>\n3,5 s<\/td>\nN\/A (not published)<\/td>\n<\/tr>\n
Clamping Architecture<\/td>\nEuropean pressurised booster<\/td>\nAmerican hydraulic (main cylinder)<\/td>\n<\/tr>\n
Station Indexing<\/td>\nServo rotary table<\/td>\nCam-driven rotary<\/td>\n<\/tr>\n
Option PCTG SPI A1<\/td>\nS136 \u2014 brume < 2%<\/td>\nStandard tooling only<\/td>\n<\/tr>\n
Certification<\/td>\nCE + ISO 9001:2015<\/td>\nCE<\/td>\n<\/tr>\n
Korea Service Base<\/td>\nAnsan-si, Gyeonggi-do<\/td>\nNorth America primary<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

\u24d8\u2002Uniloy UIB90 injection weight, screw diameter, platen size, power and machine dimensions are not available in publicly disclosed Uniloy technical literature. Korea Ever-Power EP-ZQ60 data is from verified Korea Ever-Power ZQ60 product specification catalogue. Buyers should request UIB90 technical specifications directly from Uniloy for a complete numerical comparison.<\/p>\n

Buyers evaluating other Uniloy UIB models will find dedicated EP-ZQ40 vs UIB70, EP-ZQ80 vs UIB120, EP-ZQ110 vs UIB150 and EP-ZQ135 vs UIB180 comparison pages in the Guide de remplacement des machines IBM<\/a>.<\/p>\n

<\/p>\n

European IBM Architecture vs Uniloy UIB90-Class American Design<\/h2>\n
\n
\n
\ud83c\uddea\ud83c\uddfa EP-ZQ60 European Architecture<\/div>\n
\n
\u2713<\/span>Dedicated booster cylinder for clamping hold \u2014 does NOT travel during open\/close<\/div>\n
\u2713<\/span>Lower hydraulic heat per cycle \u2014 longer seal life, 10\u201320% energy saving<\/div>\n
\u2713<\/span>Servo rotary table \u2014 precise angular positioning, consistent over high-cycle-count campaigns<\/div>\n
\u2713<\/span>1.8 m machine height \u2014 fits 2.4 m Korean GMP cleanroom ceiling with 0.6 m service clearance<\/div>\n
\u2713<\/span>1.4 m width \u2014 higher machine density per production bay<\/div>\n
\u2713<\/span>Korea Ever-Power Ansan-si service base \u2014 same-day spare parts dispatch in Korea<\/div>\n<\/div>\n<\/div>\n
\n
\ud83c\uddfa\ud83c\uddf8 Uniloy UIB90-Class American Architecture<\/div>\n
\n
\u2717<\/span>Main hydraulic cylinder performs both clamping force AND open\/close travel on every cycle<\/div>\n
\u2717<\/span>Higher hydraulic heat generation and seal wear per cycle<\/div>\n
\u2717<\/span>Cam-driven indexing \u2014 mechanical play accumulates over high-cycle production<\/div>\n
\u2717<\/span>Taller machine profile \u2014 challenges Korean GMP cleanroom ceiling height compliance<\/div>\n
\u2717<\/span>Wider footprint \u2014 limits machine density per production bay<\/div>\n
\u2717<\/span>North America primary service network \u2014 longer Korean on-site response times<\/div>\n<\/div>\n<\/div>\n<\/div>\n

These architectural differences accumulate into measurable total cost of ownership differences over a 10-year pharmaceutical IBM machine lifecycle \u2014 lower hydraulic maintenance cost, lower electricity cost per thousand bottles, and lower facility modification cost at installation for buyers in Korean GMP cleanroom environments.<\/p>\n

\"EP-ZQ60<\/p>\n

Core Advantages of EP-ZQ60 in the UIB90 Class<\/h2>\n
\n
\n
\ud83d\udd25 600 kN \u2014 Full European 60T Clamp Class<\/div>\n

400 kN booster hold force delivered by a dedicated cylinder that does not participate in mould open\/close. At 14 cavities for 10 ml pharmaceutical dropper vials and 8 cavities for 100 ml pharmaceutical syrup bottles, the EP-ZQ60 covers the full UIB90-class pharmaceutical IBM application range at industry-standard output rates within the 600 kN clamp tonnage class.<\/p>\n<\/div>\n

\n
\ud83d\udcc8 383 g Max Shot \u2014 Dual Screw 45 or 50 mm<\/div>\n

383 g at 50 mm screw and 260 g at 45 mm screw give EP-ZQ60 buyers the flexibility to select their screw based on resin MFR and target preform weight \u2014 rather than accepting a fixed screw as UIB90-class machines typically offer. 383 g supports 8 cavities at 100 ml pharmaceutical PP bottles at 40 g per preform (8 \u00d7 40 g = 320 g, within limit), and 12 cavities at 30 ml PCTG cosmetic serum droppers at 18\u201320 g per preform.<\/p>\n<\/div>\n

\n
\ud83c\udfd7 1.8 m Height \u2014 Korean GMP Cleanroom Native<\/div>\n

EP-ZQ60 is specifically sized for Korean pharmaceutical GMP cleanroom installation without ceiling modification. At 1.8 m machine height against 2.4 m standard Korean cleanroom ceiling, the 0.6 m overhead clearance accommodates barrel heater element service access, upper hydraulic system maintenance and HVAC unidirectional flow clearance \u2014 all required for GMP IQ\/OQ qualification without facility modification cost.<\/p>\n<\/div>\n

\n
\ud83d\udc8e PCTG Crystal-Clear \u2014 S136 SPI A1 Mould Option<\/div>\n

S136 SPI A1 stainless injection cavities and blow moulds (Ra \u2264 0.010 \u03bcm) deliver PCTG haze 0.8\u20131.6% ASTM D1003 at 0.5\u20130.6 mm body wall \u2014 verified on Korea Ever-Power ZQ-series T1 trials with Eastman TX1001. At 14 cavities for 10 ml PCTG eye serum droppers, EP-ZQ60 with S136 SPI A1 tooling produces approximately 14,000\u201314,400 crystal-clear bottles per hour at a quality standard Uniloy UIB90-class standard H13 tooling cannot achieve.<\/p>\n<\/div>\n

\n
\u26a1 10\u201320% Basse consommation d'\u00e9nergie + Base de service en Cor\u00e9e<\/div>\n

European pressurised-clamping delivers 10\u201320% lower energy per cycle versus conventional IBM designs at equivalent clamp tonnage. Total installed power 37 kW at 55\u201370% steady-state utilisation. Korea Ever-Power Ansan-si, Gyeonggi-do service base provides same-day Korean spare parts dispatch and 24\/7 remote PLC VPN diagnostic support \u2014 response capability that North America-based Uniloy UIB90-class service networks cannot match for Korean buyers in-country.<\/p>\n<\/div>\n

\n
\ud83d\udcdd CE + ISO 9001:2015 + Full GMP Documentation<\/div>\n

Every EP-ZQ60 ships with CE marking, ISO 9001:2015 certificate, factory acceptance test (FAT) report, PP food-contact documentation (Korean MFDS + FDA 21 CFR + EU 10\/2011) and PCTG material compliance. IQ\/OQ documentation template available on request for pharmaceutical GMP qualification programmes. Warranty 12 months from final acceptance at buyer’s facility \u2014 not from bill-of-lading date.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Sc\u00e9narios d'application<\/h2>\n

\"Types<\/p>\n

\n
\n
\ud83d\udc8a Pharmaceutical \u2014 PP and HDPE Tablet, Syrup and Oral Liquid Bottles<\/div>\n

EP-ZQ60 at 8 cavities and 100 ml is the standard Korean mid-volume pharmaceutical IBM machine configuration. 383 g shot weight at 50 mm screw provides headroom for heavier-wall pharmaceutical HDPE tablet bottles (35\u201345 g per preform) at 8 cavities (280\u2013360 g within 383 g limit) \u2014 a cavity count that UIB90-class shot weight limitations may not support at the same format. Closed injection-to-stripping cycle, \u00b10.05 mm neck thread tolerance, 100% cap-seal compliance.<\/p>\n<\/div>\n

\n
\u2728 K-Beauty Luxury Cosmetic \u2014 PCTG Crystal-Clear Serum and Dropper Vials<\/div>\n

14 cavities at 10 ml PCTG eye serum droppers at 14,000\u201314,400 bottles per hour with S136 SPI A1 mould tooling producing glass-look optical clarity. 12 cavities at 30 ml PCTG facial serum vials, 10 cavities at 60 ml PCTG essence bottles \u2014 all within EP-ZQ60 cavity table figures and 383 g shot weight limit.<\/p>\n<\/div>\n

\n
\ud83d\udca7 Daily Chemical and Fragrance \u2014 PP and PCTG Mid-Volume<\/div>\n

PP shampoo, body wash, hand sanitiser and fragrance body mist at 100\u2013500 ml in 3\u20138 cavity configurations. EP-ZQ60 at 383 g shot supports 5-cavity 500 ml PP shampoo at 55 g per bottle (275 g total, within limit) and 8-cavity 100 ml PP daily chemical pump bottles at 30 g per bottle (240 g total, within limit).<\/p>\n<\/div>\n

\n
\ud83c\udf3f Food Supplement and Health \u2014 PP and HDPE<\/div>\n

Korean supplement capsule, probiotic and vitamin container IBM at 60\u2013500 ml in 3\u201310 cavity configurations. Korea Ever-Power food-contact documentation (Korean MFDS, FDA 21 CFR 177.1520 for PP, EU 10\/2011) supplied at commercial programme commencement.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

EP-ZQ Series Selector \u2014 Uniloy UIB Reference<\/h2>\n

All data sourced from Korea Ever-Power ZQ-series product specification catalogue. Uniloy UIB model designations are cited for buyer reference only.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n
Param\u00e8tre<\/th>\nEP-ZQ40<\/th>\nEP-ZQ60<\/th>\nEP-ZQ80<\/th>\nEP-ZQ110<\/th>\nEP-ZQ135<\/th>\n<\/tr>\n<\/thead>\n
Pince d'injection<\/td>\n400 kN<\/td>\n600 kN<\/td>\n800 kN<\/td>\n1 100 kN<\/td>\n1 350 kN<\/td>\n<\/tr>\n
Max Shot<\/td>\n190\/260 g<\/td>\n260\/383 g<\/td>\n466 g<\/td>\n540 g<\/td>\n650 g<\/td>\n<\/tr>\n
Height (m)<\/td>\n1.7<\/td>\n1.8<\/td>\n2.0<\/td>\n2.2<\/td>\n2.4<\/td>\n<\/tr>\n
Caries \u00e0 10 ml<\/td>\n9<\/td>\n14<\/td>\n20<\/td>\n24<\/td>\n30<\/td>\n<\/tr>\n
Caries @100ml<\/td>\n4<\/td>\n8<\/td>\n12<\/td>\n14<\/td>\n18<\/td>\n<\/tr>\n
Puissance totale<\/td>\n20 kW<\/td>\n37 kW<\/td>\n55 kW<\/td>\n80 kW<\/td>\n95 kW<\/td>\n<\/tr>\n
Uniloy Ref.<\/td>\nUIB70<\/td>\nUIB90<\/td>\nUIB120<\/td>\nUIB150<\/td>\nUIB180<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Source: Korea Ever-Power ZQ-series product specification data. Uniloy UIB designations are for buyer reference only.<\/p>\n

<\/p>\n

What to Confirm Before Ordering<\/h2>\n

EP-ZQ60 ships in 50\u201365 working days from order confirmation. Confirm the following items with Korea Ever-Power before finalising your quote.<\/p>\n

\n
\n
\u2460 Bottle Geometry<\/div>\n

STEP file or drawing with body diameter, height and neck thread standard (e.g. 24\/410, 28\/400, 33\/400). Neck OD tolerance \u00b10.05 mm.<\/p>\n<\/div>\n

\n
\u2461 Resin Grade<\/div>\n

Required for 45 mm vs 50 mm screw selection. Include data sheet for PCTG, HDPE high-MW and filled PP grades.<\/p>\n<\/div>\n

\n
\u2462 Production Volume<\/div>\n

EP-ZQ60 suits annual volumes of 20\u201380 million bottles at 100 ml. Below, EP-ZQ40 is more economical; above, EP-ZQ80 or larger scales better.<\/p>\n<\/div>\n

\n
\u2463 Mould Steel Grade<\/div>\n

H13 SPI B1 for standard PP\/HDPE. S136 SPI A1 (Ra \u2264 0.010 \u03bcm) for PCTG crystal-clear pharmaceutical and luxury K-beauty cosmetic vials requiring haze below 2%.<\/p>\n<\/div>\n

\n
\u2464 Existing UIB90 Tooling<\/div>\n

Uniloy UIB90 mould tooling standard differs from EP-ZQ60 platen (600 \u00d7 390 mm) and mandrel configuration. Send mould drawings for Korea Ever-Power compatibility assessment before ordering.<\/p>\n<\/div>\n

\n
\u2465 Utilities & Space<\/div>\n

Air: 0.7\u20131.2 MPa \/ 1.0 m\u00b3\/min. Water: 5.0 m\u00b3\/h. Floor: min 5.0 \u00d7 2.0 m. Height 1.8 m fits 2.4 m GMP cleanrooms. Voltage: 380 V\/60 Hz or 400 V\/50 Hz.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Foire aux questions<\/h2>\n
\n
\n

Q1: Can Uniloy UIB90 mould tooling be transferred to the EP-ZQ60?<\/p>\n

Not without assessment. Uniloy UIB90-class mould systems are built to American IBM tooling standards that differ from Korea Ever-Power EP-ZQ60 platen dimensions (600 \u00d7 390 mm), mandrel pitch, mould thickness (220 mm) and bolt-hole configuration. If you own UIB90 tooling, send mould base drawings to Korea Ever-Power for a dimensional compatibility review \u2014 we advise within 5 working days at no cost.<\/p>\n<\/div>\n

\n

Q2: Why is EP-ZQ60 at 1.8 m height when UIB90-class machines are typically much taller?<\/p>\n

Uniloy UIB90-class machine height reflects the American-style vertical hydraulic clamping architecture, where the main clamping cylinder is mounted above the injection unit and requires vertical travel clearance on every mould open\/close cycle. Korea Ever-Power EP-ZQ60 uses a horizontal European pressurised-clamping layout where the booster cylinder provides clamping hold force without vertical travel \u2014 allowing the 1.8 m machine profile that fits Korean pharmaceutical GMP cleanroom ceiling heights without structural modification.<\/p>\n<\/div>\n

\n

Q3: What is the EP-ZQ60 machine and mould tooling lead time?<\/p>\n

Machine: 50\u201365 working days from order confirmation and deposit. Mould tooling: 40\u201350 working days (H13 SPI B1) or 55\u201370 working days (S136 SPI A1). Machine and mould manufactured in parallel for simultaneous T1 trial commissioning at Korea Ever-Power before shipment.<\/p>\n<\/div>\n

\n

Q4: How does EP-ZQ60 servo rotary table indexing compare to UIB90-class cam-driven indexing?<\/p>\n

EP-ZQ60 servo rotary table indexes the mandrel between stations using servo motor-driven precision positioning, maintaining consistent angular repeatability throughout the machine’s operating life. Uniloy UIB90-class cam-driven indexing mechanisms accumulate mechanical play over high-cycle-count production \u2014 the cam and follower contact surfaces wear progressively, introducing angular positioning variance that can affect preform-to-blow-cavity alignment. The practical consequence is that EP-ZQ60 servo indexing maintains consistent bottle body wall thickness distribution over the life of the machine, while UIB90-class cam indexing may require periodic adjustment to compensate for accumulated mechanical wear.<\/p>\n<\/div>\n

\n

Q5: What PCTG optical quality can EP-ZQ60 achieve for luxury cosmetic serum dropper vials?<\/p>\n

With S136 SPI A1 mould option (Ra \u2264 0.010 \u03bcm): 0.8\u20131.6% ASTM D1003 integrating sphere haze at 0.5\u20130.6 mm body wall, verified on Korea Ever-Power ZQ-series T1 trials using PCTG Eastman TX1001 at 252 \u00b0C barrel and 20 \u00b0C blow mould cooling water. Standard Uniloy UIB90-class H13 tooling typically produces 3\u20135% haze at comparable wall thickness \u2014 above the 2% threshold for Korean luxury K-beauty cosmetic dropper vial specifications.<\/p>\n<\/div>\n

\n

Q6: What pharmaceutical GMP documentation does Korea Ever-Power provide?<\/p>\n

Machine data sheet; FAT report on buyer-specified resin and cavity format; CE certificate; ISO 9001:2015 certificate; PP resin CoA with Korean MFDS food container registration and KP plastic container standard test from KOLAS-accredited laboratory; PCTG Eastman TX1001 FDA 21 CFR 177.2490 food contact letter + EU 10\/2011 Declaration of Conformity. IQ\/OQ documentation template available on request.<\/p>\n<\/div>\n

\n

Q7: What after-sales service is available in Korea for EP-ZQ60 machines?<\/p>\n

Korea Ever-Power Ansan-si, Gyeonggi-do service base: one week on-site commissioning and operator training; 24\/7 remote PLC VPN diagnostic support for 90 days post-commissioning with 2-hour software response SLA; same-day spare parts dispatch for common wear items within Korea; scheduled preventive maintenance visits on annual service contract. Uniloy UIB90-class buyers in Korea typically experience longer service response times due to North America-primary service network and international spare parts shipping lead times.<\/p>\n<\/div>\n

\n

Q8: Which EP-ZQ60 screw option \u2014 45 mm or 50 mm \u2014 is correct for pharmaceutical HDPE tablet bottles?<\/p>\n

For pharmaceutical HDPE tablet bottles at 30\u201345 g per preform and 6\u20138 cavities: the 50 mm screw at 383 g maximum is the correct selection, as it provides adequate shot weight headroom above the total cavity shot weight (e.g. 8 \u00d7 40 g = 320 g, leaving 63 g of headroom within 383 g limit). The 45 mm screw at 260 g maximum is more suitable for lighter pharmaceutical dropper vials and cosmetic serum vials at 15\u201325 g per preform in 10\u201312 cavity configurations where the lower shot weight and finer injection control is preferred for thin-wall precision pharmaceutical packaging.<\/p>\n<\/div>\n

\n

Q9: Which Korea Ever-Power model replaces Uniloy UIB120 and UIB150?<\/p>\n

EP-ZQ80 (800 kN, screw 55 mm, max shot 466 g, platen 800 \u00d7 400 mm, total power 55 kW, machine 4.5 \u00d7 1.6 \u00d7 2.0 m, 10 T) operates in the Uniloy UIB120 class. EP-ZQ110 (1,100 kN, screw 65 mm, max shot 540 g, platen 1100 \u00d7 460 mm, total power 80 kW, machine 5.0 \u00d7 1.8 \u00d7 2.2 m, 15 T) operates in the Uniloy UIB150 class. Dedicated comparison pages are in the Guide de remplacement des machines IBM<\/a>.<\/p>\n<\/div>\n

\n

Q10: Does Korea Ever-Power EP-ZQ60 carry CE marking?<\/p>\n

Yes. CE marking with Declaration of Conformity to the relevant EU Machinery Directive is standard on every EP-ZQ60. European-destination units are configured for 400 V \/ 50 Hz at order stage. Full CE documentation package available for review before order confirmation on request.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Considering a Uniloy UIB90-class IBM machine alternative?<\/h2>\n

Send Korea Ever-Power your bottle drawing, resin grade, cavity count requirement and annual production volume. We return a full feasibility report within 48 hours \u2014 EP-ZQ60 configuration recommendation, projected output per hour, mould tooling lead time and transparent machine quotation.<\/p>\n

\ud83d\udce7 Envoyer une demande<\/a>
\n\ud83d\udcc4 Formulaire de demande de devis<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

EP-ZQ60 is a 3-station European injection blow molding machine operating in the same IBM tonnage class as the Uniloy UIB90. Rated at 600 kN injection clamping force and 383 g maximum injection weight (50 mm screw option), with a machine height of 1.8 m that fits standard Korean pharmaceutical GMP cleanrooms with 2.4 m ceiling clearance \u2014 a key advantage over taller American-style IBM machines in the UIB90 class. Dual screw option: 45 mm (260 g) or 50 mm (383 g). Up to 14 cavities at 10 ml, 8 cavities at 100 ml. Processes PP, PCTG, HDPE, LDPE, PS, ABS, EVA, PLA. S136 SPI A1 mould option: PCTG haze below 2%. Dry cycle 3.5 s, total power 37 kW, footprint 3.8 \u00d7 1.4 \u00d7 1.8 m, weight 5 T. CE + ISO 9001:2015. Brand references are for buyer selection convenience only; Korea Ever-Power is not affiliated with Uniloy.<\/p>","protected":false},"featured_media":1003,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[28],"product_tag":[],"class_list":["post-1291","product","type-product","status-publish","has-post-thumbnail","product_cat-ibm-machine-replacement","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/isbm-blow-molding.com\/fr\/wp-json\/wp\/v2\/product\/1291","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/isbm-blow-molding.com\/fr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/isbm-blow-molding.com\/fr\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/fr\/wp-json\/wp\/v2\/media\/1003"}],"wp:attachment":[{"href":"https:\/\/isbm-blow-molding.com\/fr\/wp-json\/wp\/v2\/media?parent=1291"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/fr\/wp-json\/wp\/v2\/product_brand?post=1291"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/fr\/wp-json\/wp\/v2\/product_cat?post=1291"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/fr\/wp-json\/wp\/v2\/product_tag?post=1291"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}