{"id":1293,"date":"2026-07-20T06:18:07","date_gmt":"2026-07-20T06:18:07","guid":{"rendered":"https:\/\/isbm-blow-molding.com\/?post_type=product&p=1293"},"modified":"2026-07-20T06:18:07","modified_gmt":"2026-07-20T06:18:07","slug":"ep-zq80-ibm-machine-replacement-for-jomar-ibm85s","status":"publish","type":"product","link":"https:\/\/isbm-blow-molding.com\/et\/product\/ep-zq80-ibm-machine-replacement-for-jomar-ibm85s\/","title":{"rendered":"EP-ZQ80 IBM masin \u2014 Jomar IBM85S asendus"},"content":{"rendered":"
\n
\n

<\/p>\n

Valiku viiteteade:<\/strong> “Jomar” and “IBM85S” are trademarks of Jomar Corporation (USA), referenced solely to help buyers identify the Korea Ever-Power EP-ZQ80 as a comparable alternative. Korea Ever-Power does not manufacture, distribute or represent Jomar products. All technical data below refers exclusively to the Korea Ever-Power EP-ZQ80.<\/div>\n

<\/p>\n

Toote \u00fclevaade<\/h2>\n

See Korea Ever-Power EP-ZQ80<\/a><\/strong> steps into the Jomar IBM85S market with substantial technical advantages in clamping force, injection weight and machine height. At 800 kN injection clamping<\/strong> versus IBM85S-class 680 kN, EP-ZQ80 delivers 18 percent more clamping at the same 55 mm screw diameter. Maximum injection weight reaches 466 g<\/strong> \u2014 55 percent above the IBM85S ceiling of 300 g \u2014 enabling cavity counts and bottle wall weights that are simply inaccessible to IBM85S-class buyers.<\/p>\n

The machine height difference is the most operationally significant. Jomar IBM85S-class at 3.41 m<\/strong> is physically impossible to install in any standard Korean pharmaceutical GMP cleanroom with 2.4\u20133.0 m ceiling clearance. Korea Ever-Power EP-ZQ80 at 2.0 m machine height<\/strong> fits a 2.4 m cleanroom ceiling with 0.4 m overhead clearance \u2014 and with a 1.6 m machine width<\/strong> versus IBM85S-class 1.94 m, it also allows higher machine density per production bay and easier side-access maintenance.<\/p>\n

\"Sissepritse-puhumisvormimismasin<\/p>\n

The platen difference is notable: EP-ZQ80 at 800 \u00d7 400 mm offers a wider platen than IBM85S-class 464 \u00d7 749 mm. The IBM85S-class platen is taller but narrower \u2014 a legacy of its vertical IBM architecture. EP-ZQ80’s wider, lower-profile 800 \u00d7 400 mm platen directly enables higher cavity counts at small-to-medium bottle formats (20 cavities at 10 ml, 12 cavities at 100 ml) that the IBM85S-class platen geometry constrains. The 3-station simultaneous cycle runs at a 3.5-second dry cycle<\/strong> with no human hand contact from injection to stripping. Compatible with PP, PCTG, HDPE, LDPE, PS, ABS, EVA, PLA and corn starch resin. See the complete sissepritsega puhumisvormimismasin<\/a> range for all Korea Ever-Power IBM platforms.<\/p>\n

<\/p>\n

\n
\n
800 kN<\/div>\n
S\u00fcstimisklamber
\n+18% vs IBM85S<\/span><\/div>\n<\/div>\n
\n
466 g<\/div>\n
Max Shot (55mm)
\n+55% vs IBM85S 300g<\/span><\/div>\n<\/div>\n
\n
2,0 m<\/div>\n
Masina k\u00f5rgus
\n\u221241% vs IBM85S 3.41m<\/span><\/div>\n<\/div>\n
\n
20<\/div>\n
\u00d5\u00f5nsused @ 10 ml
\n12 @ 100 ml<\/span><\/div>\n<\/div>\n
\n
55 kW<\/div>\n
Koguv\u00f5imsus
\n3.5 s dry cycle<\/span><\/div>\n<\/div>\n
\n
10 T<\/div>\n
Masina kaal
\n4.5 \u00d7 1.6 m<\/span><\/div>\n<\/div>\n<\/div>\n

<\/p>\n

Tehnilised andmed<\/h2>\n

\"EP-ZQ80<\/p>\n

All parameters sourced from Korea Ever-Power ZQ80 product specification data.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Parameeter<\/th>\nEP-ZQ80 Value<\/th>\n<\/tr>\n<\/thead>\n
Masina paigutus<\/td>\n3-positsiooniline p\u00f6\u00f6rlev \u2013 samaaegne sissepritse \/ puhumine \/ eemaldamine<\/td>\n<\/tr>\n
Kruvi l\u00e4bim\u00f5\u00f5t<\/td>\n55 mm<\/td>\n<\/tr>\n
Kruvi L\/D suhe<\/td>\n22 : 1<\/td>\n<\/tr>\n
S\u00fcstimiskaal<\/td>\n466 g<\/td>\n<\/tr>\n
Sissepritse kinnitusj\u00f5ud<\/td>\n800 kN<\/td>\n<\/tr>\n
L\u00f6\u00f6gi kinnitusj\u00f5ud<\/td>\n120 kN<\/td>\n<\/tr>\n
Injection Open Stroke<\/td>\n250 mm<\/td>\n<\/tr>\n
Blow Open Stroke<\/td>\n200 mm<\/td>\n<\/tr>\n
Rotary Table Lift<\/td>\n90 mm<\/td>\n<\/tr>\n
Strippamise l\u00f6\u00f6k<\/td>\n300 mm<\/td>\n<\/tr>\n
K\u00fcttev\u00f5imsus<\/td>\n15 kW<\/td>\n<\/tr>\n
Barrel Heating Zones<\/td>\n3 + N<\/td>\n<\/tr>\n
Vormimisplaat (P \u00d7 L)<\/td>\n800 \u00d7 400 mm<\/td>\n<\/tr>\n
Vormi paksus<\/td>\n250 mm<\/td>\n<\/tr>\n
Pudeli maksimaalne l\u00e4bim\u00f5\u00f5t<\/td>\n180 mm<\/td>\n<\/tr>\n
Pudeli maksimaalne k\u00f5rgus<\/td>\n300 mm<\/td>\n<\/tr>\n
Pudeli mahu vahemik<\/td>\n1 \u2013 3000 ml<\/td>\n<\/tr>\n
Kuivts\u00fckli aeg<\/td>\n3,5 sekundit<\/td>\n<\/tr>\n
H\u00fcdrauliline r\u00f5hk<\/td>\n14 MPa<\/td>\n<\/tr>\n
Mootori v\u00f5imsus<\/td>\n37 kW<\/td>\n<\/tr>\n
Paigaldatud koguv\u00f5imsus<\/td>\n55 kW<\/td>\n<\/tr>\n
Suru\u00f5hk<\/td>\n0.7 \u2013 1.2 MPa \u00a0\/\u00a0 1.5 m\u00b3\/min<\/td>\n<\/tr>\n
Jahutusvesi<\/td>\n7.0 m\u00b3\/h \u00a0\/\u00a0 0.3 \u2013 0.4 MPa<\/td>\n<\/tr>\n
Masina m\u00f5\u00f5tmed (P \u00d7 L \u00d7 K)<\/td>\n4.5 \u00d7 1.6 \u00d7 2.0 m<\/td>\n<\/tr>\n
Masina kaal<\/td>\n10 T<\/td>\n<\/tr>\n
\u00dchilduvad materjalid<\/td>\nPP, PCTG, HDPE, LDPE, PS (piimhape), ABS, EVA, PLA, maisit\u00e4rklise vaik<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Max Cavity Count by Bottle Volume \u2014 EP-ZQ80<\/h3>\n
\n\n\n\n\n\n
10 ml<\/th>\n30 ml<\/th>\n60 ml<\/th>\n100 ml<\/th>\n250 ml<\/th>\n500 ml<\/th>\n1000 ml<\/th>\n<\/tr>\n<\/thead>\n
20<\/td>\n18<\/td>\n14<\/td>\n12<\/td>\n8<\/td>\n5\u20136<\/td>\n3\u20134<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

For reference only. Source: Korea Ever-Power ZQ80 product specification data.<\/p>\n

<\/p>\n

EP-ZQ80 vs Jomar IBM85S \u2014 Parameter Comparison<\/h2>\n

\"EP-ZQ80<\/p>\n

Korea Ever-Power ZQ80 catalogue data versus Jomar IBM85S-class reference figures from publicly available Jomar technical literature and the Korea Ever-Power IBM competitor analysis report. Jomar data is cited for buyer selection convenience only.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Parameeter<\/th>\nEP-ZQ80<\/th>\nJomar IBM85S (Ref.)<\/th>\nErinevus<\/th>\n<\/tr>\n<\/thead>\n
Sissepritse klambri j\u00f5ud<\/td>\n800 kN<\/td>\n680 kN<\/td>\n+18%<\/td>\n<\/tr>\n
Kruvi l\u00e4bim\u00f5\u00f5t<\/td>\n55 mm<\/td>\n55 mm<\/td>\nV\u00f5rdne<\/td>\n<\/tr>\n
Maksimaalne s\u00fcstimiskaal<\/td>\n466 g<\/td>\n300 g<\/td>\n+55%<\/td>\n<\/tr>\n
Vormimisplaat (P \u00d7 L)<\/td>\n800 \u00d7 400 mm<\/td>\n464 \u00d7 749 mm<\/td>\nWider vs taller<\/td>\n<\/tr>\n
Masina pikkus<\/td>\n4.5 m<\/td>\n3.33 m<\/td>\nIBM85S shorter<\/td>\n<\/tr>\n
Masina laius<\/td>\n1.6 m<\/td>\n1.94 m<\/td>\n\u221218%<\/td>\n<\/tr>\n
Masina k\u00f5rgus<\/td>\n2,0 m<\/td>\n3.41 m<\/td>\n\u221241%<\/td>\n<\/tr>\n
Masina kaal<\/td>\n10 T<\/td>\n\u2014 (pole avaldatud)<\/td>\n\u2014<\/td>\n<\/tr>\n
Paigaldatud koguv\u00f5imsus<\/td>\n55 kW<\/td>\n\u2014 (pole avaldatud)<\/td>\n10\u201320% v\u00e4hem\/ts\u00fckkel<\/td>\n<\/tr>\n
Max Cavities @ 10 ml<\/td>\n20<\/td>\n\u2014 (pole avaldatud)<\/td>\n\u2014<\/td>\n<\/tr>\n
PCTG SPI A1 valik<\/td>\nS136 \u2014 h\u00e4gusus < 2%<\/td>\nStandard tooling<\/td>\nLuksusklass<\/td>\n<\/tr>\n
Sertifitseerimine<\/td>\nCE + ISO 9001:2015<\/td>\nCE<\/td>\nV\u00f5rdne<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Buyers comparing other Jomar IBM models will find dedicated pages for EP-ZQ40 vs IBM40, EP-ZQ60 vs IBM65, EP-ZQ110 vs IBM135 and EP-ZQ135 vs IBM175 in the IBM-i masina asendamise juhend<\/a>.<\/p>\n

\"EP-ZQ80<\/p>\n

Core Advantages Over Jomar IBM85S<\/h2>\n
\n
\n
\ud83d\udd25 800 kN \u2014 18% More Clamp at Equal 55mm Screw<\/div>\n

EP-ZQ80 and IBM85S share a 55 mm screw diameter \u2014 yet EP-ZQ80 at 800 kN delivers 18% more injection clamping force than IBM85S at 680 kN. At 12-cavity 100 ml pharmaceutical HDPE production, the 120 kN additional clamping on EP-ZQ80 distributes 100 kN per injection cavity gap between the two machines across the 12-cavity stack \u2014 meaning lower per-cavity flash probability at higher injection speeds on EP-ZQ80 versus IBM85S in pharmaceutical high-speed production scenarios.<\/p>\n<\/div>\n

\n
\ud83d\udcc8 466 g Shot \u2014 55% Above IBM85S at the Same Screw<\/div>\n

Both EP-ZQ80 and IBM85S use a 55 mm screw, yet EP-ZQ80 reaches 466 g versus IBM85S 300 g \u2014 a 55% shot weight difference at identical screw diameter, reflecting barrel L\/D and injection stroke design differences. For 100 ml pharmaceutical HDPE tablet bottles at 35 g per preform: EP-ZQ80 at 466 g runs 12 cavities (420 g, within limit); IBM85S at 300 g is limited to 8 cavities (280 g). That 50% cavity-count increase on EP-ZQ80 at the same cycle time and energy input translates to 50% more output per machine per shift \u2014 a compounding production capacity advantage across three-shift pharmaceutical operation.<\/p>\n<\/div>\n

\n
\ud83c\udfd7 2.0 m vs 3.41 m \u2014 41% Lower: GMP Cleanroom Ready<\/div>\n

Jomar IBM85S-class at 3.41 m height cannot be installed in any standard Korean pharmaceutical GMP cleanroom. EP-ZQ80 at 2.0 m fits a 2.4 m GMP cleanroom ceiling with 0.4 m overhead clearance \u2014 tight but workable for barrel heater access and maintenance. For cleanrooms with 2.7 m ceiling, EP-ZQ80 has 0.7 m clearance. The IBM85S-class 3.41 m height requirement means Korean pharmaceutical buyers who choose IBM85S must either install in a dedicated tall-ceiling building section (adding 50\u2013150 million KRW in construction cost) or abandon the machine class entirely. EP-ZQ80 eliminates this constraint.<\/p>\n<\/div>\n

\n
\ud83d\udcc7 Wider 800mm Platen \u2014 20 Cavities at 10ml<\/div>\n

EP-ZQ80 platen at 800 \u00d7 400 mm versus IBM85S-class 464 \u00d7 749 mm presents opposite geometries. The EP-ZQ80’s wider, lower-profile platen is better matched to the horizontal multi-cavity layout used in small-to-medium IBM bottle formats \u2014 enabling 20 cavities at 10 ml and 12 cavities at 100 ml from the 800 mm horizontal platen width. IBM85S-class taller, narrower platen (464 mm wide \u00d7 749 mm tall) constrains the number of mandrel positions in the horizontal direction, limiting cavity count at small bottle formats where mandrel count is the primary output driver.<\/p>\n<\/div>\n

\n
\u26a1 10\u201320% Lower Energy + 18% Narrower Machine<\/div>\n

European pressurised-clamping: booster cylinder pressurised during hold only, 10\u201320% lower energy per cycle than conventional IBM85S-class hydraulic architecture. Total installed power 55 kW at 55\u201370% steady-state utilisation in pharmaceutical production. Machine width 1.6 m versus IBM85S-class 1.94 m (18% narrower) enables five EP-ZQ80 units side-by-side in a 12 m production bay with standard aisle clearance versus four IBM85S-class units \u2014 a 25% increase in machine density per bay at the same facility investment.<\/p>\n<\/div>\n

\n
\ud83d\udc8e S136 SPI A1 Mould \u2014 PCTG Haze < 2%<\/div>\n

S136 SPI A1 stainless injection cavities and blow moulds (Ra \u2264 0.010 \u03bcm) deliver PCTG crystal-clear haze 0.8\u20131.6% by ASTM D1003 \u2014 verified on Korea Ever-Power ZQ-series T1 trials. At 20 cavities for 10 ml PCTG eye serum droppers, EP-ZQ80 with S136 SPI A1 produces approximately 20,000\u201320,600 crystal-clear bottles per hour. Jomar IBM85S-class standard tooling does not include this mould steel grade \u2014 making EP-ZQ80 the technically correct choice for high-volume Korean K-beauty luxury cosmetic serum production requiring optical quality above IBM85S-class standard tooling output.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Rakendusstsenaariumid<\/h2>\n

\"ZQ40-IBM-for-Types-of-Pudelitele\"<\/p>\n

\n
\n
\ud83d\udc8a Farmaatsiatooted \u2014 suuremahulised PP ja HDPE esmased pakendid<\/div>\n

EP-ZQ80 at 12 cavities and 100 ml defines the high-volume Korean pharmaceutical IBM market tier. For HDPE tablet bottles at 35 g per preform: EP-ZQ80 runs 12 cavities (420 g, within 466 g limit); IBM85S at 300 g is limited to 8 cavities (280 g). Three-shift pharmaceutical production at this cavity-count difference compounds to approximately 55 million additional bottles per year from EP-ZQ80 versus IBM85S at the same energy cost, same factory floor space and same labour input \u2014 purely from the shot weight advantage enabling 50% more cavities.<\/p>\n<\/div>\n

\n
\u2728 K-Beauty Luxury Cosmetic \u2014 PCTG Serum and Dropper at Scale<\/div>\n

20 cavities at 10 ml PCTG eye serum droppers and 18 cavities at 30 ml PCTG facial serum vials make EP-ZQ80 the high-volume K-beauty cosmetic IBM machine. S136 SPI A1 mould tooling delivers sub-2% ASTM D1003 haze across the full 20-cavity tooling stack. EP-ZQ80 is the machine choice when a Korean luxury K-beauty brand moves from pilot to full commercial launch volume requiring 20 million+ dropper vials per year from a single machine.<\/p>\n<\/div>\n

\n
\ud83d\udca7 Daily Chemical \u2014 Large-Format PP and PCTG at High Output<\/div>\n

Korean shampoo, body wash, conditioner and fragrance body mist bottles at 100\u2013500 ml in 5\u201312 cavity configurations on EP-ZQ80. At 500 ml PP shampoo bottle at 55 g per preform: EP-ZQ80 at 466 g runs 8 cavities (440 g, within limit \u2014 vs IBM85S at 300 g limited to 5 cavities). Eight cavities versus five cavities at the same daily chemical 500 ml shampoo IBM production line is a 60% output increase from EP-ZQ80 over IBM85S-class.<\/p>\n<\/div>\n

\n
\ud83c\udf3f Food Supplement \u2014 PP and HDPE Large-Format<\/div>\n

Supplement capsule and vitamin containers at 100\u20131000 ml in 4\u201312 cavity configurations. Korea Ever-Power food-contact documentation (Korean MFDS, FDA 21 CFR 177.1520, EU 10\/2011) supplied at programme commencement.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

EP-ZQ Series Selector<\/h2>\n

All data sourced from Korea Ever-Power ZQ-series product specification catalogue. Jomar model designations are cited for buyer reference only.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n
Parameeter<\/th>\nEP-ZQ40<\/th>\nEP-ZQ60<\/th>\nEP-ZQ80<\/th>\nEP-ZQ110<\/th>\nEP-ZQ135<\/th>\n<\/tr>\n<\/thead>\n
S\u00fcstimisklamber<\/td>\n400 kN<\/td>\n600 kN<\/td>\n800 kN<\/td>\n1100 kN<\/td>\n1350 kN<\/td>\n<\/tr>\n
Maksimaalne lask<\/td>\n190\/260 g<\/td>\n260\/383 g<\/td>\n466 g<\/td>\n540 g<\/td>\n650 g<\/td>\n<\/tr>\n
Screw<\/td>\n40\/45 mm<\/td>\n45\/50 mm<\/td>\n55 mm<\/td>\n65 mm<\/td>\n70 mm<\/td>\n<\/tr>\n
K\u00f5rgus<\/td>\n1,7 meetrit<\/td>\n1,8 meetrit<\/td>\n2,0 m<\/td>\n2,2 meetrit<\/td>\n2,4 meetrit<\/td>\n<\/tr>\n
\u00d5\u00f5nsused @10ml<\/td>\n9<\/td>\n14<\/td>\n20<\/td>\n24<\/td>\n30<\/td>\n<\/tr>\n
Cavities @100ml<\/td>\n4<\/td>\n8<\/td>\n12<\/td>\n14<\/td>\n18<\/td>\n<\/tr>\n
Koguv\u00f5imsus<\/td>\n20 kW<\/td>\n37 kW<\/td>\n55 kW<\/td>\n80 kW<\/td>\n95 kW<\/td>\n<\/tr>\n
Jomar Equivalent<\/td>\nIBM40<\/td>\nIBM65<\/td>\nIBM85S<\/td>\nIBM135<\/td>\nIBM175<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Source: Korea Ever-Power ZQ-series product specification data. Jomar designations are for buyer reference only.<\/p>\n

<\/p>\n

What to Confirm Before Ordering<\/h2>\n

A correctly scoped EP-ZQ80 order ships in 55\u201370 working days. Confirm the following with Korea Ever-Power before finalising your quote.<\/p>\n

\n
\n
\u2460 Bottle Geometry<\/div>\n

STEP file or drawing with body diameter, height and neck thread standard (e.g. 28\/400, 33\/400, 38\/400). EP-ZQ80 accommodates up to 180 mm bottle diameter and 300 mm height.<\/p>\n<\/div>\n

\n
\u2461 Resin Grade<\/div>\n

EP-ZQ80 single 55 mm screw. Include resin supplier data sheet for HDPE high-MW, PCTG and filled PP to confirm barrel temperature profile and shot weight calculation.<\/p>\n<\/div>\n

\n
\u2462 Annual Volume<\/div>\n

EP-ZQ80 suits annual volumes of 60\u2013200 million bottles at 100 ml format. Below, EP-ZQ60 is more economical; above, EP-ZQ110 or larger scales better.<\/p>\n<\/div>\n

\n
\u2463 Mould Steel Grade<\/div>\n

H13 SPI B1 for standard pharmaceutical PP\/HDPE. S136 SPI A1 (Ra \u2264 0.010 \u03bcm) for PCTG crystal-clear luxury K-beauty cosmetic and pharmaceutical premium dropper vials.<\/p>\n<\/div>\n

\n
\u2464 IBM85S Tooling<\/div>\n

IBM85S platen 464 \u00d7 749 mm vs EP-ZQ80 800 \u00d7 400 mm \u2014 very different dimensional ratio. IBM85S tooling not transferable without significant adaptation. Send mould drawings for Korea Ever-Power assessment.<\/p>\n<\/div>\n

\n
\u2465 Utilities & Space<\/div>\n

Air: 0.7\u20131.2 MPa \/ 1.5 m\u00b3\/min. Water: 7.0 m\u00b3\/h. Floor: min 6.0 \u00d7 2.5 m. Height 2.0 m fits 2.4 m GMP cleanrooms with 0.4 m clearance. Voltage: 380 V\/60 Hz or 400 V\/50 Hz.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Korduma kippuvad k\u00fcsimused<\/h2>\n
\n
\n

Q1: Can Jomar IBM85S mould tooling be used on the EP-ZQ80?<\/p>\n

Not without major adaptation. IBM85S platen dimensions (464 \u00d7 749 mm) have a fundamentally different aspect ratio from EP-ZQ80 (800 \u00d7 400 mm). Mandrel pitch, mould thickness (250 mm on EP-ZQ80) and bolt-hole configuration also differ significantly. In most cases, IBM85S tooling is not adaptable to EP-ZQ80 and new mould tooling must be designed to the EP-ZQ80 platen specification. Send IBM85S mould base drawings for a Korea Ever-Power assessment \u2014 we advise within 5 working days at no cost.<\/p>\n<\/div>\n

\n

Q2: Both EP-ZQ80 and IBM85S have a 55 mm screw \u2014 why does EP-ZQ80 achieve 466 g vs IBM85S 300 g?<\/p>\n

At equal 55 mm screw diameter, injection weight is governed by barrel L\/D ratio and effective injection stroke. Korea Ever-Power EP-ZQ80 barrel L\/D is 22:1 with an injection stroke calibrated for 466 g. Jomar IBM85S-class at 55 mm achieves 300 g, indicating a shorter effective injection stroke in the Jomar IBM85S barrel design. The 55% shot weight advantage EP-ZQ80 holds over IBM85S at equal screw diameter is a fundamental barrel design difference \u2014 not a screw selection difference. Buyers who have been constrained by IBM85S’s 300 g ceiling for high-cavity-count pharmaceutical production will find EP-ZQ80 removes this constraint entirely at the same machine class.<\/p>\n<\/div>\n

\n

Q3: How does EP-ZQ80’s 800 \u00d7 400 mm platen produce 12 cavities at 100 ml when IBM85S at 464 \u00d7 749 mm cannot?<\/p>\n

At 100 ml format, mandrel centre-to-centre spacing is typically 65\u201380 mm depending on bottle body diameter. On EP-ZQ80’s 800 mm wide platen, 12 mandrels in a single row fit within 780 mm effective width (12 \u00d7 65 mm). On IBM85S’s 464 mm wide platen, only 7 mandrels fit in a single row in the same format. IBM85S’s taller 749 mm platen height can accommodate multiple rows, but multi-row mandrel arrangements in IBM require significantly more complex mould tooling and are rarely used for standard pharmaceutical and cosmetic IBM production. EP-ZQ80’s wider, lower-profile platen is inherently better suited to the single-row high-cavity-count IBM mould tooling that Korean pharmaceutical manufacturers standardise on.<\/p>\n<\/div>\n

\n

Q4: What is the EP-ZQ80 machine and mould lead time?<\/p>\n

Machine: 55\u201370 working days from order confirmation and deposit. Mould tooling: 45\u201355 working days (H13 SPI B1) or 60\u201375 working days (S136 SPI A1 for 20-cavity PCTG precision tooling). Machine and mould manufactured in parallel for simultaneous T1 trial commissioning at Korea Ever-Power before shipment.<\/p>\n<\/div>\n

\n

Q5: Can EP-ZQ80 at 2.0 m height install in a Korean pharmaceutical GMP cleanroom with 2.4 m ceiling?<\/p>\n

Yes, with 0.4 m overhead clearance. The 0.4 m clearance is the minimum workable for barrel heater element access and routine hydraulic system inspection above the machine. For cleanrooms with 2.7 m or higher ceiling, EP-ZQ80 has comfortable 0.7+ m clearance. Jomar IBM85S at 3.41 m is not installable in any Korean pharmaceutical GMP cleanroom with ceiling below 3.9 m (3.41 m machine + 0.5 m minimum service clearance) \u2014 ruling it out for standard Korean pharmaceutical facility installation without structural modification works.<\/p>\n<\/div>\n

\n

Q6: What GMP documentation does Korea Ever-Power provide for pharmaceutical IBM production on EP-ZQ80?<\/p>\n

Masina andmeleht; FAT-aruanne ostja m\u00e4\u00e4ratud vaigu ja \u00f5\u00f5nsuse formaadi kohta; CE-sertifikaat; ISO 9001:2015 sertifikaat; PP-vaigu CoA koos Korea MFDS toidumahutite registreeringuga ja KP plastmahutite standardtestiga KOLAS-akrediteeritud laborist; PCTG Eastman TX1001 FDA 21 CFR 177.2490 toiduga kokkupuutumise kiri + EU 10\/2011 vastavusdeklaratsioon. IQ\/OQ dokumentatsiooni mall on saadaval n\u00f5udmisel.<\/p>\n<\/div>\n

\n

Q7: What after-sales service does Korea Ever-Power provide for EP-ZQ80 in Korea?<\/p>\n

Korea Ever-Power Ansan-si, Gyeonggi-do: one week on-site commissioning and operator training at buyer’s facility; 24\/7 remote PLC VPN diagnostic support for 90 days post-commissioning with 2-hour software response SLA; same-day Korean spare parts dispatch for common wear items; scheduled preventive maintenance visits on annual service contract. This in-country response capability is a structural advantage versus North America-based Jomar IBM85S service networks for Korean pharmaceutical buyers.<\/p>\n<\/div>\n

\n

Q8: For 500 ml PP shampoo bottles, how many more cavities does EP-ZQ80 provide vs IBM85S?<\/p>\n

For a 500 ml PP shampoo IBM bottle at 55 g per preform: EP-ZQ80 at 466 g shot weight runs 8 cavities (8 \u00d7 55 g = 440 g, within limit \u2014 and confirmed from EP-ZQ80 cavity table at 500 ml = 5\u20136 cavities from the platen; 8 cavities would require confirmation at mould design stage for this specific format). Jomar IBM85S at 300 g shot weight is limited to 5 cavities (5 \u00d7 55 g = 275 g, within 300 g limit). The 60% shot weight advantage of EP-ZQ80 translates to approximately 60% higher cavity count potential for large-format daily chemical IBM production where shot weight, not platen size, is the primary constraint.<\/p>\n<\/div>\n

\n

Q9: Which EP-ZQ model replaces Jomar IBM135 for buyers needing to scale beyond EP-ZQ80?<\/p>\n

EP-ZQ110 (1,100 kN, screw 65 mm, max shot 540 g, platen 1100 \u00d7 460 mm, total power 80 kW, machine 5.0 \u00d7 1.8 \u00d7 2.2 m, 15 T) replaces Jomar IBM135-class (1,210 kN, screw 65 mm, shot 450\/550 g, platen 559 \u00d7 1118 mm). Dedicated comparison page in the IBM-i masina asendamise juhend<\/a>.<\/p>\n<\/div>\n

\n

Q10: Does Korea Ever-Power EP-ZQ80 carry CE marking for European pharmaceutical packaging market?<\/p>\n

Yes. CE marking with Declaration of Conformity to the relevant EU Machinery Directive is standard on every EP-ZQ80. European-destination units are configured for 400 V \/ 50 Hz at order stage. Full CE documentation package available for review before order confirmation on request.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Ready to evaluate EP-ZQ80 as your Jomar IBM85S replacement?<\/h2>\n

Send Korea Ever-Power your bottle drawing, resin grade, required cavity count and annual production volume. We return a full feasibility report within 48 hours \u2014 machine configuration, projected output per hour, mould tooling lead time and transparent quotation.<\/p>\n

\ud83d\udce7 Saada p\u00e4ring<\/a>
\n\ud83d\udcc4 Pakkumuse taotlemise vorm<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

EP-ZQ80 is a 3-station European injection blow molding machine with 800 kN injection clamping \u2014 18% above Jomar IBM85S-class 680 kN \u2014 and 466 g maximum injection weight (55 mm screw), 55% above the IBM85S ceiling of 300 g. Machine height 2.0 m versus Jomar IBM85S-class 3.41 m \u2014 41% lower, enabling pharmaceutical GMP cleanroom installation where IBM85S-class machines cannot fit. Platen 800 \u00d7 400 mm versus IBM85S 464 \u00d7 749 mm (wider in one axis, different ratio). Up to 20 cavities at 10 ml, 12 cavities at 100 ml. Single 55 mm screw matches IBM85S screw diameter. Processes PP, PCTG, HDPE, LDPE, PS, ABS, EVA, PLA. S136 SPI A1 mould: PCTG haze below 2%. Dry cycle 3.5 s, total power 55 kW, footprint 4.5 \u00d7 1.6 \u00d7 2.0 m, weight 10 T. CE + ISO 9001:2015. Brand references for buyer selection convenience only; Korea Ever-Power is not affiliated with Jomar Corporation.<\/p>","protected":false},"featured_media":1004,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[28],"product_tag":[],"class_list":["post-1293","product","type-product","status-publish","has-post-thumbnail","product_cat-ibm-machine-replacement","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/isbm-blow-molding.com\/et\/wp-json\/wp\/v2\/product\/1293","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/isbm-blow-molding.com\/et\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/isbm-blow-molding.com\/et\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/et\/wp-json\/wp\/v2\/media\/1004"}],"wp:attachment":[{"href":"https:\/\/isbm-blow-molding.com\/et\/wp-json\/wp\/v2\/media?parent=1293"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/et\/wp-json\/wp\/v2\/product_brand?post=1293"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/et\/wp-json\/wp\/v2\/product_cat?post=1293"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/et\/wp-json\/wp\/v2\/product_tag?post=1293"}],"curies":[{"name":"t\u00f6\u00f6leht","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}