TL;DR — Kratak sažetak
PET is the semi-crystalline workhorse for beverage, water, and everyday cosmetic bottles at approximately 1,200 KRW/kg. PETG is the amorphous glycol-modified copolyester for premium cosmetic, thick-wall jars, and high-clarity applications at approximately 2,500 KRW/kg. Choose PET for high-volume commodity production and gas-barrier requirements. Choose PETG for premium visual quality, thick walls over 5mm, and impact-resistance applications. Both materials run on the same Ever-Power ISBM platforms but require different temperature profiles and cooling strategies.
U ovom vodiču
- Why PET and PETG Are Often Confused
- Molecular Structure & Material Chemistry
- ISBM Processing Parameters Comparison
- Bottle Performance Properties
- Application Decision Matrix
- Cost & Supply Chain Analysis
- Uparivanje platforme Ever-Power
- Recycling & Sustainability
- Korean Market Applications
- Često postavljana pitanja
- Zaključak
1. Why PET and PETG Are Often Confused
PET and PETG share an almost identical chemical foundation. Both are polyethylene terephthalate based polyesters. Both exhibit excellent transparency. Both carry FDA and KFDA approval for food contact applications. Both recycle under the universal resin identification code 1 or 7 respectively. To a procurement manager reading spec sheets, the two materials appear interchangeable.
This similarity produces expensive selection mistakes. Korean manufacturers routinely specify PET for applications that require PETG’s impact resistance, then absorb 15-30% scrap rate from brittle bottle failures. Others specify PETG for commodity beverage applications, then carry a 200-400 KRW per bottle material premium that destroys the pricing position.
The technical reality is that one small molecular modification, the addition of cyclohexanedimethanol glycol to the polyester backbone, produces substantially different processing behavior, bottle performance characteristics, and commercial positioning. Understanding this modification is the foundation of resin selection discipline.
2. Molecular Structure & Material Chemistry
PET: Semi-Crystalline Homopolymer
Polyethylene terephthalate (PET) is a semi-crystalline thermoplastic polymer produced through polycondensation of terephthalic acid (TPA) and ethylene glycol (EG). The resulting polymer chain is regular and symmetric, which allows polymer chains to align into crystalline regions during cooling below the glass transition temperature.
This crystallization behavior is simultaneously PET’s greatest strength and its processing challenge. Biaxial orientation during ISBM stretching organizes polymer chains into oriented crystalline structures that deliver exceptional bottle strength, gas barrier properties, and dimensional stability. However, uncontrolled crystallization during cooling produces opacity and haze that ruins bottle appearance.
PETG: Amorphous Glycol-Modified Copolyester
PETG is produced by substituting approximately 30% of the ethylene glycol in the PET polymerization with cyclohexanedimethanol (CHDM). This substitution disrupts the regular polymer chain geometry and prevents crystalline alignment during cooling. The resulting material is amorphous, meaning it does not form crystalline regions regardless of cooling rate.
The amorphous structure produces exceptional optical clarity in thick-wall applications where PET would haze. It also produces superior impact resistance because amorphous polymer chains absorb energy through chain slippage rather than crystalline crack propagation. The trade-off is reduced barrier properties (no crystalline structure to impede gas permeation) and lower service temperature (no crystalline melt transition to resist deformation).
| Molecular Property | PET | PETG |
|---|---|---|
| Polymer structure | Semi-crystalline homopolymer | Amorphous copolyester |
| Glycol composition | 100% ethylene glycol | 70% EG + 30% CHDM |
| Glass transition temp (Tg) | 75-80°C | 80-85°C |
| Tačka topljenja | 245-260°C (crystalline) | No discrete melt (amorphous) |
| Crystallinity behavior | Forms crystals on slow cooling | Stays amorphous |
| Gustoća | 1.38-1.40 g/cm³ | 1.27-1.30 g/cm³ |
3. ISBM Processing Parameters Comparison
The molecular differences translate directly to measurably different ISBM processing windows. Operators switching between PET and PETG on the same platform must adjust five parameter groups.
| Parametar obrade | PET | PETG |
|---|---|---|
| Pre-drying temperature | 165-170°C | 65-70°C |
| Pre-drying time | 4-6 sati | 4-6 sati |
| Target moisture content | <50 ppm | <40 ppm |
| Temperatura topljenja | 260-280°C | 220-250°C |
| Temperatura kalupa | 15-20°C (rapid quench) | 20-30°C (moderate) |
| Stretch temperature window | 90-110°C | 85-100°C |
| Typical cycle time (250ml) | 9-11 sekundi | 10-13 seconds |
| Processing window forgiveness | Narrow (requires tight control) | Wider (more forgiving) |
The single most important processing difference is the drying temperature. PET absorbs moisture aggressively and requires high-temperature desiccant drying at 165-170°C to reach <50 ppm residual moisture. PETG handles moisture more gracefully and only requires 65-70°C drying. Operators switching from PET to PETG must reset drying profiles or risk polymer degradation.
The second key difference is stretch temperature tolerance. PET requires precise preform temperature control in a narrow 90-110°C window for optimal biaxial orientation without overheating into crystallization. PETG offers a wider forgiving window because it does not crystallize regardless of stretch conditions. This makes PETG significantly easier to process reliably, particularly for operators new to ISBM.
4. Bottle Performance Properties
The finished bottle performance differences are substantial and drive most application decisions.
| Performance Property | PET Bottle | PETG Bottle |
|---|---|---|
| Optical clarity (thin wall) | Odlično | Odlično |
| Optical clarity (thick wall >5mm) | Haze risk | Glass-like clarity |
| Otpornost na udarce | Moderate (brittle when cold) | High (ductile down to -40°C) |
| Rigidity / stiffness | Visoko | Umjereno |
| Gas barrier (CO2, O2) | Odlično | Umjereno |
| Hemijska otpornost | Dobro | Better (alcohols, detergents) |
| Stress crack resistance | Umjereno | Odlično |
| Maximum service temperature | 60-65°C (standard) | 65-70°C |
| Gamma sterilization | Limited compatibility | Fully compatible |
| UV resistance | Dobro | Better |
Three performance dimensions drive most Korean selection decisions:
- ▸Thick-wall clarity: for premium cosmetic jars with 5-10mm wall thickness, PETG delivers glass-like clarity that PET cannot match. This single property drives K-beauty premium segment selection toward PETG.
- ▸Impact resistance: PETG bottles survive drops that shatter PET bottles, particularly at refrigeration temperatures. This matters for refrigerated beauty products and premium ready-to-drink beverages.
- ▸Gas barrier: PET biaxial crystalline structure creates excellent CO2 and O2 barrier for carbonated beverages, beer, and oxygen-sensitive products. PETG lacks this barrier and is unsuitable for carbonated applications.
5. Application Decision Matrix
The following decision matrix maps common bottle applications to the optimal resin choice based on the performance characteristics discussed above.
| Aplikacija | Recommended Resin | Obrazloženje |
|---|---|---|
| Gazirano piće | PET | Gas barrier essential |
| Mineralna voda | PET | Cost-sensitive commodity |
| Juice / tea (RTD) | PET | O2 barrier for shelf life |
| Everyday cosmetic (shampoo, lotion) | PET | Standard wall thickness |
| Premium K-beauty cream jar | PETG | Thick wall + premium clarity |
| Serum / essence bottle (premium) | PETG | Glass-like visual appeal |
| Fragrance / perfume | PETG | Alcohol resistance |
| Pharmaceutical syrup bottle | PET | GMP-established supply |
| Medical device container | PETG | Gamma sterilization compatibility |
| Heavy-wall food jar (>5mm) | PETG | No haze in thick sections |
| Household chemical bottle | PETG | Stress crack + chemical resistance |
| 5L water gallon | PET | Rigidity + cost efficiency |
6. Cost & Supply Chain Analysis
Material cost is one of three cost components that differ meaningfully between PET and PETG bottle production. Supply chain structure and processing cost also contribute to total economics.
| Dimenzija troškova | PET (2026 Korea) | PETG (2026 Korea) |
|---|---|---|
| Virgin resin price | ~1,200-1,400 KRW/kg | ~2,300-2,800 KRW/kg |
| Recycled grade availability | Widely available (rPET) | Limited (specialty rPETG) |
| Korean supply base | SK geocentric, Lotte Chemical | Eastman (US), SK chemicals |
| Troškovi energije za sušenje | Higher (165°C) | Lower (65°C) |
| Processing cycle time | Faster | 10-15% slower |
| Scrap rate forgiveness | Narrower window | Wider window |
| Typical bottle cost differential | Osnovna vrijednost | +200-400 KRW per 250ml bottle |
The 200-400 KRW per bottle cost differential is meaningful for commodity beverage products where retail pricing is tightly constrained. For premium K-beauty applications where retail prices range 25,000-80,000 KRW per SKU, the PETG premium is absorbed easily and justified by visual quality and brand positioning.
Korean PETG supply primarily depends on Eastman (US-origin Tritan/Eastar) imports with SK chemicals providing domestic supply. This creates longer lead times than PET, where SK geocentric and Lotte Chemical provide abundant domestic supply with 2-4 week lead times typical.
7. Ever-Power Platform Matching
All Ever-Power ISBM platforms handle both PET and PETG through configurable temperature profiles and drying system adjustment. Specific platforms are optimized for each material based on typical application envelope.
| Profil aplikacije | Primary Resin | Preporučena platforma |
|---|---|---|
| Premium K-beauty PETG jar (100-250ml) | PETG | HGY150-V4-EV |
| PET cosmetic / pharma (50-300ml) | PET | HGY150-V4 |
| Precision pharma / small bottle (5-50ml) | Both | HGY50-V3-EV |
| PET beverage commodity (500ml) | PET | HGY200-V4 |
| Thick-wall PETG jar (500ml-1L) | PETG | HGY250-V4 |
For operators producing mixed PET and PETG portfolios on a single platform, the HGY150-V4-EV full-servo premium platform offers the widest processing window flexibility. The full-servo architecture enables precise temperature profile switching between materials without mechanical adjustment, reducing changeover time to 30-45 minutes versus 2-3 hours on hydraulic platforms.
Mould design considerations also differ between materials. PETG requires slightly more generous vent clearance to accommodate larger thermal expansion during cooling. For operators developing new bottle formats in either material, custom one-step ISBM mould service engineers tooling specifically for the target resin.
8. Recycling & Sustainability
Recyclability increasingly factors into Korean brand decisions as K-EPR compliance and global sustainability commitments tighten. PET and PETG have meaningfully different recycling infrastructure profiles.
PET Recycling Infrastructure
PET carries resin identification code 1 and recycles through mature global infrastructure. Korean collection and bottle-to-bottle recycling systems handle PET at scale, with SK geocentric and domestic recyclers providing commercial rPET supply from 30% to 100% recycled content. K-EPR compliance for beverage and water bottles is well-supported through PET.
For comprehensive understanding of rPET processing considerations in ISBM, see our dedicated guide on recycled PET production for Korean operators in the K-EPR compliance era.
PETG Recycling Challenges
PETG carries resin identification code 7 (other plastics) and lacks dedicated recycling streams in most markets including Korea. When PETG bottles mix with PET recycling streams, the amorphous copolyester contaminates PET recyclate and degrades recycled material properties. Korean brands pursuing closed-loop sustainability commitments typically cannot use PETG at scale without dedicated collection infrastructure.
This recycling gap is one reason Korean premium K-beauty brands increasingly evaluate alternatives. Some brands reserve PETG only for ultra-premium low-volume SKUs while using PET with high rPET content for mainstream SKU portfolios.
9. Korean Market Applications
K-BEAUTY PREMIUM (PETG)
Seoul Premium Skincare Brand — 100ml Essence Jar
Application: 100ml premium essence jar, 7mm wall thickness, glass-like clarity requirement, duty-free channel positioning at 65,000 KRW retail price point.
Resin selection: PETG amorphous copolyester. Rationale: thick-wall PET would haze visibly at 7mm section. PETG delivers glass-like clarity that justifies 65,000 KRW positioning. Additional 300 KRW per bottle material cost represents less than 0.5% of retail price and is absorbed trivially.
BEVERAGE COMMODITY (PET)
Busan Water Producer — 500ml Mineral Water
Application: 500ml mineral water bottle, 0.8mm wall thickness, 30% rPET content for K-EPR compliance, retail price 800 KRW per bottle.
Resin selection: PET homopolymer with 30% rPET content. Rationale: commodity retail price cannot absorb PETG premium. Standard wall thickness does not require amorphous clarity. Mature rPET supply supports K-EPR compliance at target cost. PET gas barrier adequate for still water application.
HYBRID PORTFOLIO (BOTH)
Gyeonggi Cosmetic Contract Filler — Mixed Portfolio
Application: Contract filling for 18 SKU portfolio spanning everyday toner (PET, 250ml, thin wall) to premium serum jar (PETG, 30ml, heavy wall) to refillable lotion bottle (PET, 500ml).
Platform selection: HGY150-V4-EV full-servo premium 4-station platform. Rationale: full-servo architecture enables rapid material changeover (30-45 min) between PET and PETG production runs. 4-station conditioning delivers premium quality for both resins. Single platform serves entire SKU portfolio without specialized equipment.
10. Često postavljana pitanja
Q: Can I run PET and PETG on the same ISBM machine?
Yes. All Ever-Power ISBM platforms handle both materials through temperature profile adjustment and drying system reconfiguration. Changeover between materials takes 30-45 minutes on full-servo platforms (HGY150-V4-EV) and 2-3 hours on hydraulic platforms. Mould compatibility must be verified because PETG typically requires slightly more generous vent clearance than PET.
Q: Does PETG require different drying equipment than PET?
Both materials use desiccant drying systems, but at substantially different temperatures. PET requires 165-170°C for 4-6 hours to reach <50 ppm moisture. PETG requires only 65-70°C for 4-6 hours. A single desiccant dryer can serve both materials through temperature set-point adjustment, but operators must reset profiles correctly for each production run.
Q: Why do premium K-beauty brands prefer PETG over PET?
Two reasons drive premium K-beauty PETG preference. First, thick-wall jars (5-10mm sections) stay glass-clear in PETG but haze in PET due to uncontrolled crystallization during cooling. Second, PETG impact resistance at cold temperatures (down to -40°C) prevents drop damage in duty-free shipping and cosmetic refrigeration. The 200-400 KRW per bottle material premium is trivial relative to premium retail pricing.
Q: Is PETG more sustainable than PET?
No. PET is significantly more sustainable at the recycling end of lifecycle. PET recycles through mature global infrastructure at scale with bottle-to-bottle rPET readily available in Korea. PETG (resin code 7) lacks dedicated recycling streams and contaminates PET recycling if mixed. For K-EPR compliance and circular economy commitments, PET with rPET content is typically the better sustainability choice, with PETG reserved for premium applications where amorphous properties are essential.
Q: Can I blend PET and PETG to get properties of both?
Not recommended. Blending produces variable properties depending on ratio, poor optical clarity due to phase separation, and unpredictable processing behavior. Both materials also contaminate each other’s recycling streams. For applications requiring properties of both materials, consider multi-layer bottle technology or specialty copolyesters like Tritan (Eastman) that combine specific property targets in a single formulation.
11. Zaključak
PET and PETG are not competing materials. They are complementary resins that serve structurally different application requirements. PET dominates high-volume commodity production, carbonated beverage, mineral water, and standard cosmetic applications where cost efficiency and gas barrier matter most. PETG dominates premium thick-wall cosmetic jars, alcohol-containing fragrance bottles, medical device packaging requiring gamma sterilization, and applications where amorphous clarity or impact resistance is essential.
The correct Korean manufacturing approach is not choosing between the two materials universally, but matching each SKU to the optimal material based on performance requirements, retail positioning, and sustainability considerations. Ever-Power ISBM platforms handle both materials with appropriate temperature profile configuration, and the HGY150-V4-EV full-servo platform specifically enables rapid changeover between materials for mixed-portfolio contract fillers.
Need Help Matching Resin to Bottle Design?
Share your bottle specification, wall thickness, retail positioning, and volume target. Our Korean engineering team returns resin recommendation with processing parameter recommendations and platform matching within 48 hours.