{"id":1284,"date":"2026-07-20T03:37:29","date_gmt":"2026-07-20T03:37:29","guid":{"rendered":"https:\/\/isbm-blow-molding.com\/?post_type=product&p=1284"},"modified":"2026-07-20T03:37:30","modified_gmt":"2026-07-20T03:37:30","slug":"ep-zq40-ibm-machine-replacement-for-jomar-ibm40","status":"publish","type":"product","link":"https:\/\/isbm-blow-molding.com\/ar\/product\/ep-zq40-ibm-machine-replacement-for-jomar-ibm40\/","title":{"rendered":"EP-ZQ40 IBM Machine \u2014 Replacement for Jomar IBM40"},"content":{"rendered":"
\n
\n

<\/p>\n

Selection Reference Notice:<\/strong> “Jomar” and “IBM40” are trademarks of Jomar Corporation (USA), referenced solely to help buyers identify the Korea Ever-Power EP-ZQ40 as a functionally comparable alternative. Korea Ever-Power does not manufacture, distribute or represent Jomar products. All data below refers exclusively to the Korea Ever-Power EP-ZQ40.<\/div>\n

<\/p>\n

\u0646\u0638\u0631\u0629 \u0639\u0627\u0645\u0629 \u0639\u0644\u0649 \u0627\u0644\u0645\u0646\u062a\u062c<\/h2>\n

\"EP-ZQ40<\/p>\n

\u0627\u0644 Korea Ever-Power EP-ZQ40<\/a><\/strong> is a full European 3-station injection blow molding machine delivering 400 kN injection clamping force<\/strong> \u2014 18 percent above the Jomar IBM40-class 340 kN \u2014 and a maximum injection weight of 260 g<\/strong> with the 45 mm screw option, 44 percent above the IBM40 ceiling of 180 g. On a 3.5 \u00d7 1.3 \u00d7 1.7 m chassis weighing 3.8 tonnes, it fits through a standard Korean factory rolling door and, critically, its 1.7 m machine height<\/strong> is 38 percent shorter than the IBM40-class approximate 2.75 m \u2014 a decisive factor for pharmaceutical GMP cleanroom installations with ceiling constraints.<\/p>\n

The 3-station simultaneous cycle (Injection \u2192 Blow \u2192 Stripping) runs at a 3.5-second dry cycle<\/strong>. All three stations operate in parallel within every cycle: Station 1 injects the next preform while Station 2 blows the current bottle and Station 3 strips the finished bottle onto the exit conveyor. No human hand contacts the preform or finished bottle at any point \u2014 satisfying Korean pharmaceutical GMP cleanroom handling requirements without additional isolation enclosures.<\/p>\n

Material compatibility: PP, PCTG, HDPE, LDPE, PS (lactic acid bacteria grade), ABS, EVA, PLA and corn starch environmental resin. The EP-ZQ40 screw is available in 40 \u0645\u0645<\/strong> (190 g shot, precision pharmaceutical and cosmetic dropper) or 45 \u0645\u0645<\/strong> (260 g shot, high-output supplement and daily chemical bottles). For PCTG crystal-clear cosmetic dropper vials, the optional S136 SPI A1 mould steel<\/strong> (Ra \u2264 0.010 \u03bcm) delivers haze below 2 percent \u2014 the optical standard Korean luxury K-beauty brands specify. The full \u0645\u0627\u0643\u064a\u0646\u0629 \u0646\u0641\u062e \u0627\u0644\u0642\u0648\u0627\u0644\u0628 \u0628\u0627\u0644\u062d\u0642\u0646<\/a> range includes EP-ZQ40 through EP-ZQ135 for every production scale.<\/p>\n

<\/p>\n

\n
\n
400 kN<\/div>\n
\u0642\u0648\u0629 \u062a\u062b\u0628\u064a\u062a \u0627\u0644\u062d\u0642\u0646
\n+18% vs Jomar IBM40<\/span><\/div>\n<\/div>\n
\n
260 g<\/div>\n
Max Injection Weight (45mm)
\n+44% vs Jomar IBM40<\/span><\/div>\n<\/div>\n
\n
1.7 m<\/div>\n
Machine Height
\n\u221238% vs IBM40-class 2.75m<\/span><\/div>\n<\/div>\n
\n
3.5 s<\/div>\n
Dry Cycle Time
\n20 kW Total Power<\/span><\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\u0627\u0644\u0645\u0648\u0627\u0635\u0641\u0627\u062a \u0627\u0644\u0641\u0646\u064a\u0629<\/h2>\n

\"EP-ZQ40<\/p>\n

All parameters are drawn directly from Korea Ever-Power ZQ40 product specification data. Screw selection (40 mm or 45 mm) is confirmed against your resin MFR and target preform weight before the quote is finalised.<\/p>\n

<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u0627\u0644\u0645\u0639\u0644\u0645\u0629<\/th>\nEP-ZQ40 Value<\/th>\n<\/tr>\n<\/thead>\n
\u062a\u062e\u0637\u064a\u0637 \u0627\u0644\u0622\u0644\u0629<\/td>\n3-station rotary \u2014 simultaneous Injection \/ Blow \/ Stripping<\/td>\n<\/tr>\n
\u0642\u0637\u0631 \u0627\u0644\u0628\u0631\u063a\u064a<\/td>\n40 mm (standard) \/ 45 mm (option)<\/td>\n<\/tr>\n
\u0646\u0633\u0628\u0629 \u0637\u0648\u0644\/\u0642\u0637\u0631 \u0627\u0644\u0628\u0631\u063a\u064a<\/td>\n22 : 1<\/td>\n<\/tr>\n
\u0648\u0632\u0646 \u0627\u0644\u062d\u0642\u0646\u0629<\/td>\n190 g (40 mm) \/ 260 g (45 mm)<\/td>\n<\/tr>\n
\u0627\u0644\u0637\u0627\u0642\u0629 \u0627\u0644\u062d\u0631\u0627\u0631\u064a\u0629<\/td>\n7.5 kW<\/td>\n<\/tr>\n
Barrel Heating Zones<\/td>\n3 + N<\/td>\n<\/tr>\n
\u0627\u0644\u0633\u0643\u062a\u0629 \u0627\u0644\u062f\u0645\u0627\u063a\u064a\u0629 \u0627\u0644\u0646\u0627\u062a\u062c\u0629 \u0639\u0646 \u0627\u0644\u062d\u0642\u0646<\/td>\n120 mm<\/td>\n<\/tr>\n
\u0642\u0648\u0629 \u062a\u062b\u0628\u064a\u062a \u0627\u0644\u062d\u0642\u0646<\/td>\n400 kN<\/td>\n<\/tr>\n
Injection Open Stroke<\/td>\n165 mm<\/td>\n<\/tr>\n
\u0642\u0648\u0629 \u0627\u0644\u062a\u062b\u0628\u064a\u062a \u0628\u0627\u0644\u0646\u0641\u062e<\/td>\n60 kN<\/td>\n<\/tr>\n
Blow Open Stroke<\/td>\n140 mm<\/td>\n<\/tr>\n
Rotary Table Lift<\/td>\n70 mm<\/td>\n<\/tr>\n
\u0636\u0631\u0628\u0629 \u0627\u0644\u062a\u0639\u0631\u064a\u0629<\/td>\n220 mm<\/td>\n<\/tr>\n
Mould Platen Size (L \u00d7 W)<\/td>\n480 \u00d7 340 mm<\/td>\n<\/tr>\n
\u0633\u064f\u0645\u0643 \u0627\u0644\u0642\u0627\u0644\u0628<\/td>\n180 mm<\/td>\n<\/tr>\n
\u0623\u0642\u0635\u0649 \u0642\u0637\u0631 \u0644\u0644\u0632\u062c\u0627\u062c\u0629<\/td>\n120 mm<\/td>\n<\/tr>\n
\u0623\u0642\u0635\u0649 \u0627\u0631\u062a\u0641\u0627\u0639 \u0644\u0644\u0632\u062c\u0627\u062c\u0629<\/td>\n220 mm<\/td>\n<\/tr>\n
\u062d\u062c\u0645 \u0627\u0644\u0632\u062c\u0627\u062c\u0629 \u0627\u0644\u0645\u0646\u0627\u0633\u0628<\/td>\n1 \u2013 1500 ml<\/td>\n<\/tr>\n
Dry Cycle Time<\/td>\n3.5 s<\/td>\n<\/tr>\n
\u0627\u0644\u0636\u063a\u0637 \u0627\u0644\u0647\u064a\u062f\u0631\u0648\u0644\u064a\u0643\u064a<\/td>\n14 MPa<\/td>\n<\/tr>\n
\u0642\u0648\u0629 \u0627\u0644\u0645\u062d\u0631\u0643<\/td>\n11 kW<\/td>\n<\/tr>\n
\u0625\u062c\u0645\u0627\u0644\u064a \u0627\u0644\u0637\u0627\u0642\u0629 \u0627\u0644\u0645\u0631\u0643\u0628\u0629<\/td>\n20 kW<\/td>\n<\/tr>\n
Operating Power (steady state)<\/td>\n10.4 \u2013 14 kW (52\u201370% of rated)<\/td>\n<\/tr>\n
Compressed Air<\/td>\n0.7 \u2013 1.2 MPa \u00a0\/\u00a0 0.7 m\u00b3\/min<\/td>\n<\/tr>\n
Cooling Water<\/td>\n3.5 m\u00b3\/h \u00a0\/\u00a0 0.3 \u2013 0.4 MPa<\/td>\n<\/tr>\n
\u0623\u0628\u0639\u0627\u062f \u0627\u0644\u0622\u0644\u0629 (\u0627\u0644\u0637\u0648\u0644 \u00d7 \u0627\u0644\u0639\u0631\u0636 \u00d7 \u0627\u0644\u0627\u0631\u062a\u0641\u0627\u0639)<\/td>\n3.5 \u00d7 1.3 \u00d7 1.7 m<\/td>\n<\/tr>\n
\u0648\u0632\u0646 \u0627\u0644\u0622\u0644\u0629<\/td>\n3.8 T<\/td>\n<\/tr>\n
\u0627\u0644\u0645\u0648\u0627\u062f \u0627\u0644\u0645\u062a\u0648\u0627\u0641\u0642\u0629<\/td>\nPP, PCTG, HDPE, LDPE, PS (lactic acid), ABS, EVA, PLA, corn starch resin<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Max Cavity Count by Bottle Volume<\/h3>\n
\n\n\n\n\n\n
10 \u0645\u0644<\/th>\n30 \u0645\u0644<\/th>\n60 \u0645\u0644<\/th>\n100 \u0645\u0644<\/th>\n250 \u0645\u0644<\/th>\n500 \u0645\u0644<\/th>\n1000 ml<\/th>\n<\/tr>\n<\/thead>\n
9<\/td>\n8<\/td>\n6<\/td>\n4<\/td>\n3<\/td>\n2<\/td>\n1<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

For reference only. Actual cavity count depends on bottle body diameter, wall thickness and mould layout. Source: Korea Ever-Power ZQ40 product specification data.<\/p>\n

<\/p>\n

EP-ZQ40 vs Jomar IBM40 \u2014 Head-to-Head<\/h2>\n

\"EP-ZQ40<\/p>\n

Comparison uses Korea Ever-Power ZQ40 catalogue data alongside Jomar IBM40-class reference figures from publicly available Jomar technical literature and the Korea Ever-Power IBM competitor analysis report. Jomar data is cited for buyer selection convenience; Korea Ever-Power does not guarantee its accuracy, as specifications are subject to change by Jomar Corporation.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u0627\u0644\u0645\u0639\u0644\u0645\u0629<\/th>\nEP-ZQ40<\/th>\nJomar IBM40 (Ref.)<\/th>\nDifference<\/th>\n<\/tr>\n<\/thead>\n
Injection Clamp Force<\/td>\n400 kN<\/td>\n340 kN<\/td>\n+18%<\/td>\n<\/tr>\n
\u0642\u0637\u0631 \u0627\u0644\u0628\u0631\u063a\u064a<\/td>\n40 \/ 45 mm<\/td>\n35 \/ 40 mm<\/td>\nLarger<\/td>\n<\/tr>\n
Max Injection Weight<\/td>\n260 g<\/td>\n180 g<\/td>\n+44%<\/td>\n<\/tr>\n
Mould Platen Size<\/td>\n480 \u00d7 340 mm<\/td>\n394 \u00d7 508 mm<\/td>\nDifferent layout<\/td>\n<\/tr>\n
Machine Height<\/td>\n1.7 m<\/td>\n2.75 m<\/td>\n\u221238%<\/td>\n<\/tr>\n
\u0627\u0644\u0628\u0635\u0645\u0629 (\u0627\u0644\u0637\u0648\u0644 \u00d7 \u0627\u0644\u0639\u0631\u0636)<\/td>\n3.5 \u00d7 1.3 m<\/td>\n2.72 \u00d7 1.9 m<\/td>\nNarrower<\/td>\n<\/tr>\n
\u0627\u0644\u0642\u0648\u0629 \u0627\u0644\u0643\u0627\u0645\u0644\u0629<\/td>\n20 kW<\/td>\n\u2014 (not published)<\/td>\n10\u201320% less per cycle<\/td>\n<\/tr>\n
PCTG Haze (SPI A1 mould)<\/td>\n< 2% (S136 option)<\/td>\nStandard tooling<\/td>\nLuxury grade<\/td>\n<\/tr>\n
Certification<\/td>\nCE + ISO 9001:2015<\/td>\nCE<\/td>\nEqual<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Buyers evaluating larger Jomar models can find dedicated comparison pages for EP-ZQ60 vs IBM65, EP-ZQ80 vs IBM85S, EP-ZQ110 vs IBM135 and EP-ZQ135 vs IBM175 in the IBM machine replacement guide<\/a>.<\/p>\n

<\/p>\n

Core Advantages Over Jomar IBM40-Class<\/h2>\n
\n
\n
\ud83d\udd25 400 kN Injection Clamp \u2014 18% Higher<\/div>\n

Tighter preform cavity closure at higher injection speeds reduces neck thread flash and enables \u00b10.05 mm neck dimensional tolerance. The pressurised booster-cylinder design does not participate in mould open\/close travel \u2014 extending hydraulic seal life beyond conventional IBM40-class designs while cutting energy draw by 10\u201320% per cycle.<\/p>\n<\/div>\n

\n
\ud83d\udcc8 260 g Max Shot Weight \u2014 44% More<\/div>\n

For 40 g pharmaceutical HDPE tablet bottles: EP-ZQ40 runs 6 cavities (6 \u00d7 40 g = 240 g, within 260 g limit); IBM40-class at 180 g maximum is limited to 4 cavities for the same format \u2014 a 50% output gap at identical cycle time and energy consumption.<\/p>\n<\/div>\n

\n
\ud83c\udfd7 1.7 m Height \u2014 GMP Cleanroom Ready<\/div>\n

38% shorter than IBM40-class approximate 2.75 m. Fits Korean pharmaceutical GMP cleanrooms at 2.4 m ceiling without structural modification. Machine width of 1.3 m also clears standard Korean factory rolling doors during installation \u2014 a detail IBM40-class buyers at 1.9 m width often underestimate.<\/p>\n<\/div>\n

\n
\ud83d\udc8e PCTG Haze < 2% \u2014 Luxury Grade<\/div>\n

S136 SPI A1 mould steel (Ra \u2264 0.010 \u03bcm) achieves PCTG haze 0.8\u20131.6% by ASTM D1003 at 0.5\u20130.6 mm body wall, verified on Korea Ever-Power ZQ40 T1 trials with Eastman TX1001. The S136 SPI A1 option is not standard on IBM40-class tooling.<\/p>\n<\/div>\n

\n
\u26a1 10\u201320% Lower Energy Per Cycle<\/div>\n

Full European pressurised-clamping: booster cylinder pressurised only during clamp hold, not during open\/close travel. Steady-state operating power is 10.4\u201314 kW against 20 kW rated \u2014 52\u201370% nameplate utilisation, measurably lower than conventional IBM40-class hydraulic architecture.<\/p>\n<\/div>\n

\n
\u2699\ufe0f Dual Screw Option \u2014 40 or 45 mm<\/div>\n

Choose 40 mm (190 g) for precision pharmaceutical dropper and cosmetic serum vials, or 45 mm (260 g) for high-output supplement and daily chemical bottles. IBM40-class fixes buyers to a single screw configuration with a 180 g ceiling \u2014 no post-installation flexibility.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Application Scenarios<\/h2>\n

\"EP-ZQ40<\/p>\n

<\/p>\n

\n
\n
\ud83d\udc8a Pharmaceutical Primary Packaging \u2014 PP and HDPE Tablet \/ Syrup Bottles<\/div>\n

EP-ZQ40 at 45 mm screw (260 g max shot) covers the full IBM40-class pharmaceutical range of 30\u2013500 ml PP and HDPE bottles with meaningful cavity-count headroom above IBM40-class. For a 100 ml PP pharmaceutical syrup bottle at 25 g per bottle, EP-ZQ40 runs 4 cavities (4 \u00d7 25 g = 100 g, 160 g remaining headroom) versus IBM40-class at 180 g maximum which has only 80 g of headroom for the same configuration. Closed injection-to-stripping cycle, \u00b10.05 mm neck thread tolerance and 100% cap-seal pass rate are confirmed at Korea Ever-Power T1 trial.<\/p>\n<\/div>\n

\n
\u2728 K-Beauty Cosmetic Serum and Dropper Vials \u2014 PCTG Crystal-Clear<\/div>\n

For Korean luxury eye serum, nail oil dropper and facial treatment vial brands requiring PCTG haze below 2%, the EP-ZQ40 with S136 SPI A1 mould achieves 0.8\u20131.6% ASTM D1003 haze at 0.5\u20130.6 mm body wall \u2014 verified in ZQ40 T1 trials with Eastman TX1001 at 252 \u00b0C barrel and 20 \u00b0C blow mould cooling. At 9 cavities for a 10 ml PCTG eye serum dropper, output reaches approximately 9,000\u20139,600 bottles per hour.<\/p>\n<\/div>\n

\n
\ud83d\udca7 Daily Chemical and Fragrance Spray Bottles \u2014 PP and PCTG<\/div>\n

Korean K-beauty body mist, aftershave spray and hair mist IBM bottles (50\u2013250 ml PP or PCTG) run on EP-ZQ40 in 3\u20138 cavity configurations at 5,000\u20138,600 bottles per hour. For 50 ml PCTG body mist at 8 cavities and 25 g per preform: 8 \u00d7 25 g = 200 g, within the 260 g limit. IBM40-class at 180 g maximum supports at most 7 cavities at 25 g preform weight \u2014 EP-ZQ40’s single additional cavity is a 14% output increase at identical cycle time.<\/p>\n<\/div>\n

\n
\ud83c\udf3f Food Supplement and Health Care \u2014 PP and HDPE<\/div>\n

Korean supplement capsule bottles, vitamin containers and herbal tincture dropper vials (30\u2013500 ml PP or HDPE) are produced on EP-ZQ40 with food-contact-grade resin documentation (Korean MFDS food container standard, FDA 21 CFR 177.1520 for PP, EU 10\/2011 Declaration of Conformity) supplied by Korea Ever-Power at commercial programme commencement for buyer’s product registration.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

EP-ZQ Series Selector \u2014 When to Choose EP-ZQ40<\/h2>\n

Korea Ever-Power offers five EP-ZQ platforms from 400 kN through 1,350 kN. All data below is sourced from Korea Ever-Power ZQ-series product specification catalogue. Jomar model designations are cited for buyer reference only.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u0627\u0644\u0645\u0639\u0644\u0645\u0629<\/th>\nEP-ZQ40<\/th>\nEP-ZQ60<\/th>\nEP-ZQ80<\/th>\nEP-ZQ110<\/th>\nEP-ZQ135<\/th>\n<\/tr>\n<\/thead>\n
\u0645\u0634\u0628\u0643 \u0627\u0644\u062d\u0642\u0646<\/td>\n400 kN<\/td>\n600 kN<\/td>\n800 kN<\/td>\n1,100 kN<\/td>\n1,350 kN<\/td>\n<\/tr>\n
Max Shot Wt.<\/td>\n190\/260 g<\/td>\n260\/383 g<\/td>\n466 g<\/td>\n540 \u063a\u0631\u0627\u0645<\/td>\n650 g<\/td>\n<\/tr>\n
Screw Dia.<\/td>\n40\/45 mm<\/td>\n45\/50 mm<\/td>\n55 \u0645\u0645<\/td>\n65 mm<\/td>\n70 mm<\/td>\n<\/tr>\n
Platen (L\u00d7W)<\/td>\n480\u00d7340 \u0645\u0645<\/td>\n600\u00d7390 \u0645\u0645<\/td>\n800\u00d7400 mm<\/td>\n1100\u00d7460 mm<\/td>\n1300\u00d7500 mm<\/td>\n<\/tr>\n
Cavities @ 10 ml<\/td>\n9<\/td>\n14<\/td>\n20<\/td>\n24<\/td>\n30<\/td>\n<\/tr>\n
Cavities @ 100 ml<\/td>\n4<\/td>\n8<\/td>\n12<\/td>\n14<\/td>\n18<\/td>\n<\/tr>\n
\u0627\u0644\u0642\u0648\u0629 \u0627\u0644\u0643\u0627\u0645\u0644\u0629<\/td>\n20 kW<\/td>\n37 kW<\/td>\n55 kW<\/td>\n80 kW<\/td>\n95 kW<\/td>\n<\/tr>\n
Machine Wt.<\/td>\n3.8 T<\/td>\n5 T<\/td>\n10 T<\/td>\n15 T<\/td>\n18 T<\/td>\n<\/tr>\n
Jomar Equivalent<\/td>\nIBM40<\/td>\nIBM65<\/td>\nIBM85S<\/td>\nIBM135<\/td>\nIBM175<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Source: Korea Ever-Power ZQ-series product specification data. Jomar model designations are cited for buyer reference only.<\/p>\n

<\/p>\n

What to Confirm Before Ordering<\/h2>\n

A correctly scoped EP-ZQ40 order ships in 45\u201360 working days and commissions on site in 5\u20137 working days. Confirm the following before finalising your quote.<\/p>\n

\n
\n
\u2460 Bottle Geometry & Neck Finish<\/div>\n

Share a 3D STEP file or drawing with body diameter, overall height and neck thread standard (e.g. 18\/415, 24\/410, 28\/400). IBM neck thread OD tolerance is \u00b10.05 mm.<\/p>\n<\/div>\n

\n
\u2461 Target Resin Grade & Supplier<\/div>\n

Required for screw size selection (40 mm vs 45 mm) and barrel temperature profiling. Include data sheet for PCTG, ABS and filled PP grades.<\/p>\n<\/div>\n

\n
\u2462 Annual Production Volume<\/div>\n

EP-ZQ40 is the economic choice below approximately 20 million bottles\/year at 100 ml. Above that, EP-ZQ60 (8 cavities at 100 ml) typically delivers lower cost-per-bottle.<\/p>\n<\/div>\n

\n
\u2463 Mould Steel Grade<\/div>\n

H13 SPI B1 for standard opaque PP bottles. S136 SPI A1 (Ra \u2264 0.010 \u03bcm) for PCTG crystal-clear pharmaceutical and luxury cosmetic dropper vials requiring haze below 2%.<\/p>\n<\/div>\n

\n
\u2464 Existing IBM40 Mould Tooling<\/div>\n

If you own IBM40 moulds, send mould base drawings for a Korea Ever-Power compatibility assessment before ordering. EP-ZQ40 platen (480 \u00d7 340 mm) differs from IBM40-class (394 \u00d7 508 mm) in layout and bolt pattern.<\/p>\n<\/div>\n

\n
\u2465 Utilities & Installation<\/div>\n

Air: 0.7\u20131.2 MPa \/ 0.7 m\u00b3\/min. Water: 3.5 m\u00b3\/h \/ 0.3\u20130.4 MPa. Floor: min 4.5 \u00d7 2.0 m. Voltage: 380 V\/60 Hz (Korea) or 400 V\/50 Hz (EU). Machine height 1.7 m clears 2.4 m GMP cleanrooms.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Certifications & After-Sales Service<\/h2>\n

\"Korea<\/p>\n

Every EP-ZQ40 ships with CE marking and ISO 9001:2015 certification<\/strong>. The factory acceptance test (FAT) is run on your specified resin, cavity count and bottle geometry before crating, producing a written FAT report that travels with the machine. Warranty is 12 months from final acceptance at the buyer’s facility<\/strong> \u2014 not from bill-of-lading date.<\/p>\n

<\/p>\n

\n
\ud83d\udee0<\/span><\/p>\n
\n
On-Site Commissioning<\/div>\n

One week of installation, start-up and operator training by a Korea Ever-Power engineer at your facility.<\/p>\n<\/div>\n<\/div>\n

\ud83d\udcf1<\/span><\/p>\n
\n
24\/7 Remote PLC Support<\/div>\n

VPN diagnostic access for 90 days post-commissioning. Software issues resolved within 2 hours of ticket submission.<\/p>\n<\/div>\n<\/div>\n

\ud83d\udce6<\/span><\/p>\n
\n
Spare Parts Stock<\/div>\n

Common wear parts stocked at Korea Ever-Power for rapid dispatch. Korean buyers: 24-hour courier to major industrial zones.<\/p>\n<\/div>\n<\/div>\n

\ud83d\udcdd<\/span><\/p>\n
\n
GMP Documentation<\/div>\n

FAT report, CE cert, ISO 9001:2015, PP\/PCTG material compliance docs (MFDS, FDA 21 CFR, EU 10\/2011). IQ\/OQ template available on request.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\u0627\u0644\u0623\u0633\u0626\u0644\u0629 \u0627\u0644\u0634\u0627\u0626\u0639\u0629<\/h2>\n
\n
\n

Q1: Will my existing Jomar IBM40 moulds fit directly on the EP-ZQ40?<\/p>\n

Not without assessment. EP-ZQ40 platen is 480 \u00d7 340 mm versus Jomar IBM40-class approximate 394 \u00d7 508 mm. Mandrel pitch, mould thickness (180 mm on EP-ZQ40) and bolt patterns also differ. Send your existing IBM40 mould base drawings and Korea Ever-Power will advise on adaptation requirements within 5 working days at no cost.<\/p>\n<\/div>\n

\n

Q2: What is the EP-ZQ40 machine and mould tooling lead time?<\/p>\n

Machine: 45\u201360 working days from order confirmation and deposit. Mould tooling: 35\u201345 working days (H13 SPI B1) or 50\u201365 working days (S136 SPI A1). Machine and mould are manufactured in parallel for simultaneous T1 trial commissioning before shipment.<\/p>\n<\/div>\n

\n

Q3: What PCTG haze level does EP-ZQ40 achieve with the S136 SPI A1 mould option?<\/p>\n

0.8\u20131.6% haze by ASTM D1003 integrating sphere at 0.5\u20130.6 mm body wall, verified on Korea Ever-Power ZQ40 T1 trials using PCTG Eastman TX1001 at 252 \u00b0C barrel and 20 \u00b0C blow mould cooling water \u2014 below the 2% threshold specified by Korean luxury K-beauty brands.<\/p>\n<\/div>\n

\n

Q4: How does the pressurised clamping design save energy versus IBM40-class architecture?<\/p>\n

The EP-ZQ40 booster cylinder provides injection clamping hold force but does not travel during mould open and close. Conventional IBM40-class designs use the main hydraulic cylinder for both clamping force and open\/close travel \u2014 accelerating and decelerating on every cycle, generating heat and wear. EP-ZQ40 steady-state operating power is 10.4\u201314 kW against 20 kW rated (52\u201370% utilisation), 10\u201320% lower per cycle than conventional IBM architecture of equivalent clamp tonnage.<\/p>\n<\/div>\n

\n

Q5: Can EP-ZQ40 run more cavities than IBM40-class for HDPE pharmaceutical tablet bottles?<\/p>\n

Yes, for heavier-wall formats. Example: 100 ml HDPE pharmaceutical tablet bottle at 40 g per bottle. IBM40-class at 180 g maximum: 4 cavities (4 \u00d7 40 g = 160 g, only 20 g headroom). EP-ZQ40 at 45 mm screw and 260 g maximum: 6 cavities (6 \u00d7 40 g = 240 g, within 260 g limit). That is a 50% cavity-count increase \u2014 50% more output at identical cycle time and energy consumption.<\/p>\n<\/div>\n

\n

Q6: What pharmaceutical GMP documentation does Korea Ever-Power supply with EP-ZQ40?<\/p>\n

Standard package: machine data sheet; FAT report on buyer-specified resin and cavity format; CE certificate; ISO 9001:2015 certificate; PP resin CoA (Korean MFDS food container + KP plastic container standard test from KOLAS-accredited lab); PCTG: Eastman TX1001 FDA 21 CFR 177.2490 letter + EU 10\/2011 Declaration of Conformity. IQ\/OQ documentation template available on request for pharmaceutical GMP qualification programmes.<\/p>\n<\/div>\n

\n

Q7: What on-site commissioning service does Korea Ever-Power provide?<\/p>\n

One week of on-site commissioning and operator training covering: machine levelling and installation; first production start-up on buyer-specified resin and bottle; HMI recipe management; mould changeover procedure; daily preventive maintenance; basic hydraulic and electrical troubleshooting. Korean-language operator manual and electrical schematic PDF included. 24\/7 remote PLC diagnostic support via VPN for 90 days post-commissioning, 2-hour response SLA for software issues.<\/p>\n<\/div>\n

\n

Q8: How long does a full mould changeover take on EP-ZQ40?<\/p>\n

A complete cavity swap (injection cavity block, mandrel core rod set, blow cavity) takes approximately 60\u201390 minutes with a two-person crew. Pre-heating the replacement injection cavity on an adjacent temperature controller while current production runs reduces total changeover time to approximately 40\u201350 minutes.<\/p>\n<\/div>\n

\n

Q9: Which Korea Ever-Power EP-ZQ model replaces Jomar IBM65 and IBM85S?<\/p>\n

EP-ZQ60 (600 kN, screw 45\/50 mm, max shot 383 g, platen 600 \u00d7 390 mm, total power 37 kW) replaces Jomar IBM65-class (460 kN, screw 45 mm, shot 205 g). EP-ZQ80 (800 kN, screw 55 mm, max shot 466 g, platen 800 \u00d7 400 mm, total power 55 kW) replaces Jomar IBM85S-class (680 kN, screw 55 mm, shot 300 g). Dedicated comparison pages are in the IBM machine replacement guide<\/a>.<\/p>\n<\/div>\n

\n

Q10: Does Korea Ever-Power EP-ZQ40 carry CE marking for European market shipment?<\/p>\n

Yes. CE marking documentation is standard on every EP-ZQ40, including Declaration of Conformity to the relevant EU Machinery Directive. EU-destination machines are configured for 400 V \/ 50 Hz at order stage. The CE documentation package is available for review before order confirmation on request.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Ready to evaluate EP-ZQ40 as your Jomar IBM40 replacement?<\/h2>\n

Send us your bottle drawing, target resin grade, required cavity count and annual production volume target. Korea Ever-Power returns a full feasibility report within 48 hours \u2014 machine configuration recommendation, projected output per hour, mould tooling lead time and a transparent quotation.<\/p>\n

\ud83d\udce7 Send Enquiry<\/a>
\n\ud83d\udcc4 Request Quote Form<\/a><\/div>\n<\/div>\n<\/div>\n

<\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"

EP-ZQ40 is a 3-station European injection blow molding machine with 400 kN injection clamping \u2014 18% higher than Jomar IBM40-class 340 kN \u2014 and 260 g maximum shot weight (45 mm screw), 44% above the IBM40 ceiling of 180 g. Machine height 1.7 m fits standard pharmaceutical GMP cleanrooms where IBM40-class units at 2.75 m cannot. Up to 9 cavities at 10 ml, 4 cavities at 100 ml. Processes PP, PCTG, HDPE, LDPE, PS, ABS, EVA, PLA. S136 SPI A1 mould option: PCTG haze below 2%. Dry cycle 3.5 s, total power 20 kW, footprint 3.5\u00d71.3\u00d71.7 m, weight 3.8 T. CE + ISO 9001:2015. Brand references are for buyer selection convenience only; Korea Ever-Power is not affiliated with Jomar Corporation.<\/p>","protected":false},"featured_media":1016,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[28],"product_tag":[],"class_list":["post-1284","product","type-product","status-publish","has-post-thumbnail","product_cat-ibm-machine-replacement","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/isbm-blow-molding.com\/ar\/wp-json\/wp\/v2\/product\/1284","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/isbm-blow-molding.com\/ar\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/isbm-blow-molding.com\/ar\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/ar\/wp-json\/wp\/v2\/media\/1016"}],"wp:attachment":[{"href":"https:\/\/isbm-blow-molding.com\/ar\/wp-json\/wp\/v2\/media?parent=1284"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/ar\/wp-json\/wp\/v2\/product_brand?post=1284"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/ar\/wp-json\/wp\/v2\/product_cat?post=1284"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/isbm-blow-molding.com\/ar\/wp-json\/wp\/v2\/product_tag?post=1284"}],"curies":[{"name":"\u0648\u0648\u0631\u062f\u0628\u0631\u064a\u0633","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}